American Elements produces to many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopeia/British Pharmacopeia) and follows applicable ASTM testing standards.See safety data and research below and pricing/lead time above. American Elements specializes in producing high purity Aluminum Dysprosium Sputtering targets with the highest possible density and smallest possible average grain sizes for use in semiconductor, chemical vapor deposition (CVD) and physical vapor deposition (PVD) display and optical applications. Our standard Sputtering Targets for thin film are available monoblock or bonded with dimensions and configurations up to 820 mm with hole drill locations and threading, beveling, grooves and backing designed to work with both older sputtering devises as well as the latest process equipment, such as large area coating for solar energy or fuel cells and flip-chip applications. Research sized targets are also produced as well as custom sizes and alloys. All targets are analyzed using best demonstrated techniques including X-Ray Fluorescence (XRF), Glow Discharge Mass Spectrometry (GDMS), and Inductively Coupled Plasma (ICP). "Sputtering" allows for thin film deposition of an ultra high purity sputtering metallic or oxide material onto another solid substrate by the controlled removal and conversion of the target material into a directed gaseous/plasma phase through ionic bombardment. "Sputtering" allows for thin film deposition of an ultra high purity sputtering metallic or oxide material onto another solid substrate by the controlled removal and conversion of the target material into a directed gaseous/plasma phase through ionic bombardment. We can also provide targets outside this range in addition to just about any size rectangular, annular, or oval target. Materials are produced using crystallization, solid state and other ultra high purification processes such as sublimation. American Elements specializes in producing custom compositions for commercial and research applications and for new proprietary technologies. American Elements also casts any of the rare earth metals and most other advanced materials into rod, bar or plate form, as well as other machined shapes and through other processes nanoparticles. We also produce Aluminum as disc, granules, ingot, pellets, pieces, powder, and rod. Other shapes are available by request.
Aluminum is a Block P, Group 13, Period 3 element. The number of electrons in each of Aluminum's shells is 2, 8, 3 and its electronic configuration is [Ne] 3s2 3p1. In its elemental form aluminum's CAS number is 7429-90-5. The aluminum atom has a radius of 143.2.pm and it's Van der Waals radius is 200.pm. Aluminum is not known to be harmful but ingestion may cause Alzheimer's disease.Aluminum is a silvery-white metal that possesses many desirable characteristics. It is light, nonmagnetic and nonsparking.
It stands second among metals in the scale of malleability, and sixth in ductility. It is extensively used in many industrial applications where a strong, light, easily constructed material is needed. Although it's electrical conductivity is only about 60% that of copper, it is used in electrical transmission lines because of its light weight. Pure aluminum is soft and lacks strength, but alloyed with small amounts of copper, magnesium, silicon, manganese, or other elements impart a variety of useful properties. These alloys are of vital importance in the construction of modern aircraft and rockets. Aluminum, evaporated in a vacuum, forms a highly reflective coating for both visible light and radiant heat. They are used to coat telescope mirrors. Aluminum is available as metal and compounds with purities from 99% to 99.9999% (ACS grade to ultra-high purity); metals in the form of foil, sputtering target, and rod, and compounds as submicron and nanopowder. See Aluminum research below.
Dysprosium is a Block F, Group 3, Period 6 element. The number of electrons in each of Dysprosium's shells is 2, 8, 18, 28, 8, 2 and its electronic configuration is [Xe] 4f10 6s2. In its elemental form dysprosium's CAS number is 7429-91-6. The dysprosium atom has a radius of 175.2.pm and it's Van der Waals radius is unknown. Dysprosium is moderately toxic. Dysprosium is most commonly used in neodymium-iron-boron high strength permanent magnets. Dysprosium is available as metal and compounds with purities from 99% to 99.999% (ACS grade to ultra-high purity); metals in the form of foil, sputtering target, and rod, and compounds as submicron and nanopowder. While it has one of the highest magnetic moments of any of the rare earths (10.6µB), this has not resulted in an ability to perform on its own as a practical alternative to neodymium compositions. It is however now an essential additive in NdFeB production. It is also used in special ceramic compositions based on BaTiO formulations. Recent research has examined the use of dysprosium in dysprosium-iron-garnet (DyIG) and silicon implanted with dysprosium and holmium to form donor centers. Dysprosium is added to various advanced optical formulations due to the fact that it emits in the 470-500 and 570-600 nm wavelengths. Dysprosium was first discovered by Paul Emile Lecoq de Boisbaudran in 1886. The element name originates from the Greek word 'dysprositos' meaning hard to get at. See Dysprosium research below.
PACKAGING SPECIFICATIONS FOR BULK & RESEARCH QUANTITIES
Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Shipping documentation includes a Certificate of Analysis and Material Safety Data Sheet (MSDS). Bullion and bar forms are best if purchasing solely for physical possession and risk exposure.
Characterisation of optically stimulated luminescence dosemeters to measure organ doses in diagnostic radiology.
Endo A, Katoh T, Kobayashi I, Joshi R, Sur J, Okano T.
Dentomaxillofac Radiol. 2011 Nov 24. [Epub ahead of print]
PMID:
22116136
[PubMed - as supplied by publisher]
Metal recovery from high-grade WEEE: A life cycle assessment.
Bigum M, Brogaard L, Christensen TH.
J Hazard Mater. 2011 Oct 17. [Epub ahead of print]
PMID:
22115841
[PubMed - as supplied by publisher]
Protein interactions with nanosized hydrotalcites of different composition.
Bellezza F, Alberani A, Posati T, Tarpani L, Latterini L, Cipiciani A.
J Inorg Biochem. 2011 Oct 8;106(1):134-142. [Epub ahead of print]
PMID:
22115829
[PubMed - as supplied by publisher]
Neurobehavioral toxic effects of perinatal oral exposure to aluminum on the developmental motor reflexes, learning, memory and brain neurotransmitters of mice offspring.
Abu-Taweel GM, Ajarem JS, Ahmad M.
Pharmacol Biochem Behav. 2011 Nov 13. [Epub ahead of print]
PMID:
22115621
[PubMed - as supplied by publisher]
Lithium-Ion Conducting Electrolyte Salts for Lithium Batteries.
Aravindan V, Gnanaraj J, Madhavi S, Liu HK.
Chemistry. 2011 Nov 24. doi: 10.1002/chem.201101486. [Epub ahead of print]
PMID:
22114046
[PubMed - as supplied by publisher]
Contact fatigue response of porcelain-veneered alumina model systems.
Stappert CF, Baldassarri M, Zhang Y, Stappert D, Thompson VP.
J Biomed Mater Res B Appl Biomater. 2011 Nov 24. doi: 10.1002/jbm.b.31977. [Epub ahead of print]
PMID:
22113973
[PubMed - as supplied by publisher]
Influence of formulation pH and suspension state on freezing-induced agglomeration of aluminum adjuvants.
Salnikova MS, Davis H, Mensch C, Celano L, Thiriot DS.
J Pharm Sci. 2011 Nov 23. doi: 10.1002/jps.22815. [Epub ahead of print]
PMID:
22113733
[PubMed - as supplied by publisher]
Evidence of foliar aluminium accumulation in local, regional and global datasets of wild plants.
Metali F, Salim KA, Burslem DF.
New Phytol. 2011 Nov 23. doi: 10.1111/j.1469-8137.2011.03965.x. [Epub ahead of print]
PMID:
22111583
[PubMed - as supplied by publisher]
Turning aluminium into a noble-metal-like catalyst for low-temperature activation of molecular hydrogen.
Chopra IS, Chaudhuri S, Veyan JF, Chabal YJ.
Nat Mater. 2011 Nov 23;10(12):986. doi: 10.1038/nmat3174. No abstract available.
PMID:
22109610
[PubMed - in process]
Fabrication of a dual-layer aluminum nanowires polarization filter array.
Gruev V.
Opt Express. 2011 Nov 21;19(24):24361-9. doi: 10.1364/OE.19.024361.
PMID:
22109463
[PubMed - in process]
Image-quality perception as a function of dose in digital radiography.
Lehnert T, Naguib NN, Korkusuz H, Bauer RW, Kerl JM, Mack MG, Vogl TJ.
AJR Am J Roentgenol. 2011 Dec;197(6):1399-403.
PMID:
22109295
[PubMed - in process]
Highly sensitive nano-porous lattice biosensor based on localized surface plasmon resonance and interference.
Yeom SH, Kim OG, Kang BH, Kim KJ, Yuan H, Kwon DH, Kim HR, Kang SW.
Opt Express. 2011 Nov 7;19(23):22882-91. doi: 10.1364/OE.19.022882.
PMID:
22109166
[PubMed - in process]
Regulatory role of zinc during aluminium-induced altered carbohydrate metabolism in rat brain.
Singla N, Dhawan DK.
J Neurosci Res. 2011 Nov 23. doi: 10.1002/jnr.22790. [Epub ahead of print]
PMID:
22108899
[PubMed - as supplied by publisher]
Three-shell-based lens barrel for the effective athermalization of an IR optical system.
Yang HS, Kihm H, Moon IK, Jung GJ, Choi SC, Lee KJ, Hwang HY, Kim SW, Lee YW.
Appl Opt. 2011 Nov 20;50(33):6206-13. doi: 10.1364/AO.50.006206.
PMID:
22108878
[PubMed - in process]
Influences of heat seal lacquer thickness on the quality of blister packages.
Mühlfeld L, Langguth P, Häusler H, Hagels H.
Eur J Pharm Sci. 2011 Nov 16. [Epub ahead of print]
PMID:
22108348
[PubMed - as supplied by publisher]
Efficient extraction of vaccines formulated in aluminum hydroxide gel by including surfactants in the extraction buffer.
Zhu D, Huang S, McClellan H, Dai W, Syed NR, Gebregeorgis E, Mullen GE, Long C, Martin LB, Narum D, Duffy P, Miller LH, Saul A.
Vaccine. 2011 Nov 18. [Epub ahead of print]
PMID:
22107848
[PubMed - as supplied by publisher]
Electronic structure investigation of highly compressed aluminum with k edge absorption spectroscopy.
Benuzzi-Mounaix A, Dorchies F, Recoules V, Festa F, Peyrusse O, Levy A, Ravasio A, Hall T, Koenig M, Amadou N, Brambrink E, Mazevet S.
Phys Rev Lett. 2011 Oct 14;107(16):165006. Epub 2011 Oct 13.
PMID:
22107398
[PubMed - in process]
Short-time electron dynamics in aluminum excited by femtosecond extreme ultraviolet radiation.
Medvedev N, Zastrau U, Förster E, Gericke DO, Rethfeld B.
Phys Rev Lett. 2011 Oct 14;107(16):165003. Epub 2011 Oct 12.
PMID:
22107395
[PubMed - in process]
Nanoporous Polymeric Nanofibers Based on Selectively Etched PS-b-PDMS Block Copolymers.
Birlik Demirel G, Buyukserin F, Morris MA, Demirel G.
ACS Appl Mater Interfaces. 2011 Nov 22. [Epub ahead of print]
PMID:
22107361
[PubMed - as supplied by publisher]
Low bias electron scattering in structure-identified single wall carbon nanotubes: role of substrate polar phonons.
Chandra B, Perebeinos V, Berciaud S, Katoch J, Ishigami M, Kim P, Heinz TF, Hone J.
Phys Rev Lett. 2011 Sep 30;107(14):146601. Epub 2011 Sep 28.
PMID:
22107221
[PubMed - in process]
Selected Trace Elements in the Sacramento River, California: Occurrence and Distribution.
Taylor HE, Antweiler RC, Roth DA, Alpers CN, Dileanis P.
Arch Environ Contam Toxicol. 2011 Dec 23. [Epub ahead of print]
PMID:
22193863
[PubMed - as supplied by publisher]
High energy electron beams characterization using CaSO(4):Dy+PTFE Phosphors for clinical therapy applications.
Rivera T, Espinoza A, Von SM, Alvarez R, Jiménez Y.
Appl Radiat Isot. 2011 Dec 13. [Epub ahead of print]
PMID:
22182630
[PubMed - as supplied by publisher]
Strongly dipolar bose-einstein condensate of dysprosium.
Lu M, Burdick NQ, Youn SH, Lev BL.
Phys Rev Lett. 2011 Nov 4;107(19):190401. Epub 2011 Oct 31.
PMID:
22181585
[PubMed - in process]
Lipophilic phosphonium-lanthanide compounds with magnetic, luminescent, and tumor targeting properties.
Li M, Ganea GM, Lu C, De Rooy SL, El-Zahab B, Fernand VE, Jin R, Aggarwal S, Warner IM.
J Inorg Biochem. 2011 Nov 3;107(1):40-46. [Epub ahead of print]
PMID:
22172501
[PubMed - as supplied by publisher]
Differential genotoxicity of chemical properties and particle size of rare metal and metal oxide nanoparticles.
Hasegawa G, Shimonaka M, Ishihara Y.
J Appl Toxicol. 2012 Jan;32(1):72-80. doi: 10.1002/jat.1719. Epub 2011 Aug 23.
PMID:
22162085
[PubMed - in process]
A Discrete Dysprosium Trigonal Prism Showing Single-Molecule Magnet Behaviour.
Tian H, Wang M, Zhao L, Guo YN, Guo Y, Tang J, Liu Z.
Chemistry. 2011 Dec 12. doi: 10.1002/chem.201102547. [Epub ahead of print]
PMID:
22161973
[PubMed - as supplied by publisher]
Synthesis, characterisation and magnetic study of a cyano-substituted dysprosium double decker single-molecule magnet.
Waters M, Moro F, Krivokapic I, McMaster J, Slageren JV.
Dalton Trans. 2011 Dec 6. [Epub ahead of print]
PMID:
22146842
[PubMed - as supplied by publisher]
Molecular Structure and Vibrational Spectra of Mixed MDyX(4) (M = Li, Na, K, Rb, Cs; X = F, Cl, Br, I) Vapor Complexes: A Computational and Matrix-Isolation Infrared Spectroscopic Study.
Groen CP, Kovács A, Varga Z, Hargittai M.
Inorg Chem. 2011 Dec 2. [Epub ahead of print]
PMID:
22136352
[PubMed - as supplied by publisher]
Quadruple-CO(3)(2-) bridged octanuclear dysprosium(iii) compound showing single-molecule magnet behaviour.
Tian H, Zhao L, Guo YN, Guo Y, Tang J, Liu Z.
Chem Commun (Camb). 2012 Jan 18;48(5):708-10. Epub 2011 Dec 1.
PMID:
22129652
[PubMed - in process]
Salen-based coordination polymers of iron and the rare Earth elements.
Bhunia A, Lan Y, Mereacre V, Gamer MT, Powell AK, Roesky PW.
Inorg Chem. 2011 Dec 19;50(24):12697-704. Epub 2011 Nov 14.
PMID:
22082051
[PubMed - in process]
Novel lanthanide-based polymeric chains and corresponding ultrafast dynamics in solution.
Thielemann DT, Klinger M, Wolf TJ, Lan Y, Wernsdorfer W, Busse M, Roesky PW, Unterreiner AN, Powell AK, Junk PC, Deacon GB.
Inorg Chem. 2011 Dec 5;50(23):11990-2000. Epub 2011 Nov 8.
PMID:
22066577
[PubMed - in process]
Tetra-kis(?-2-phen-oxy-propionato)-?O,O':O';?O:O,O',?O:O'-bis-[(1,10-phenanthroline-?N,N')(2-phen-oxy-propionato-?O,O')praseodymium(III)].
Shen JB, Liu JL, Zhao GL.
Acta Crystallogr Sect E Struct Rep Online. 2011 Sep 1;67(Pt 9):m1321. Epub 2011 Aug 31.
PMID:
22058896
[PubMed]
Tetra-kis(?-2-phen-oxy-propionato)-?O,O':O';?O:O,O',?O:O'-bis-[(1,10-phenanthroline-?N,N')(2-phen-oxy-propionato-?O,O')dysprosium(III)].
Shen JB, Liu JL, Zhao GL.
Acta Crystallogr Sect E Struct Rep Online. 2011 Sep 1;67(Pt 9):m1320. Epub 2011 Aug 31.
PMID:
22058895
[PubMed]
An organometallic sandwich lanthanide single-ion magnet with an unusual multiple relaxation mechanism.
Jeletic M, Lin PH, Le Roy JJ, Korobkov I, Gorelsky SI, Murugesu M.
J Am Chem Soc. 2011 Dec 7;133(48):19286-9. Epub 2011 Nov 11.
PMID:
22032273
[PubMed - in process]
A tetragonal form of dysprosium orthomolybdate at room temperature.
Dorzhieva S, Chumak I, Sarapulova A, Mikhailova D, Bazarova J, Ehrenberg H.
Acta Crystallogr C. 2011 Oct;67(Pt 10):i50-2. Epub 2011 Sep 15.
PMID:
21979965
[PubMed - in process]
Note: simple means for selective removal of the 365 nm line from the Hg spectrum using Dy.
Vesborg PC, Chorkendorff I, Brock-Nannestad T, Dethlefsen JR, Bendix J.
Rev Sci Instrum. 2011 Sep;82(9):096102.
PMID:
21974629
[PubMed - in process]
Effects of chronic ?-irradiation on the aquatic microbial microcosm: equi-dosimetric comparison with effects of heavy metals.
Fuma S, Kawaguchi I, Kubota Y, Yoshida S, Kawabata Z, Polikarpov GG.
J Environ Radioact. 2012 Feb;103(2):81-6. Epub 2011 Sep 29.
PMID:
21962482
[PubMed - in process]
Cool White Light Emission in Dysprosium and Salicylic Acid Doped Poly Vinyl Alcohol Film Under UV Excitation.
Kaur G, Rai SB.
J Fluoresc. 2011 Sep 27. [Epub ahead of print]
PMID:
21947610
[PubMed - as supplied by publisher]
[Synthesis, crystal structure and luminescent properties of a dysprosium coordinaation polymer based on pyridine-2, 6-dicarboxylic acid].
Fan RQ, Wang P, Ren JY, Zhou GP, Yang YL.
Guang Pu Xue Yu Guang Pu Fen Xi. 2011 Jul;31(7):1734-8. Chinese.
PMID:
21942013
[PubMed - in process]
Anisotropic dysprosium.
Gatteschi D.
Nat Chem. 2011 Sep 23;3(10):830. doi: 10.1038/nchem.1157. No abstract available.
PMID:
21941259
[PubMed - indexed for MEDLINE]
and smallest possible average grain sizes for use in semiconductor, chemical vapor deposition (CVD) and physical vapor deposition (PVD) display and optical applications. Our standard Sputtering Targets for thin film are available monoblock or bonded with dimensions and configurations up to 820 mm with hole drill locations and threading, beveling, grooves and backing designed to work with both older sputtering devises as well as the latest process equipment, such as large area coating for solar energy or fuel cells and flip-chip applications. Research sized targets are also produced as well as custom sizes and alloys. All targets are analyzed using best demonstrated techniques including X-Ray Fluorescence (XRF), Glow Discharge Mass Spectrometry (GDMS), and Inductively Coupled Plasma (ICP). "Sputtering" allows for thin film deposition of an ultra high purity sputtering metallic or oxide material onto another solid substrate by the controlled removal and conversion of the target material into a directed gaseous/plasma phase through ionic bombardment. "Sputtering" allows for thin film deposition of an ultra high purity sputtering metallic or oxide material onto another solid substrate by the controlled removal and conversion of the target material into a directed gaseous/plasma phase through ionic bombardment. We can also provide targets outside this range in addition to just about any size rectangular, annular, or oval target. Materials are produced using crystallization, solid state and other ultra high purification processes such as sublimation. American Elements specializes in producing custom compositions for commercial and research applications and for new proprietary technologies. American Elements also casts any of the rare earth metals and most other advanced materials into rod, bar or plate form, as well as other machined shapes and through other processes nanoparticles. We also produce Aluminum as disc, granules, ingot, pellets, pieces, powder, and rod. Other shapes are available by request.
Aluminum is a Block P, Group 13, Period 3 element. The number of electrons in each of Aluminum's shells is 2, 8, 3 and its electronic configuration is [Ne] 3s2 3p1. In its elemental form aluminum's CAS number is 7429-90-5. The aluminum atom has a radius of 143.2.pm and it's Van der Waals radius is 200.pm. Aluminum is not known to be harmful but ingestion may cause Alzheimer's disease.Aluminum is a silvery-white metal that possesses many desirable characteristics. It is light, nonmagnetic and nonsparking.
It stands second among metals in the scale of malleability, and sixth in ductility. It is extensively used in many
industrial applications where a strong, light, easily constructed material is needed. Although it's electrical conductivity is only about 60% that of copper, it is used in electrical transmission 
lines because of its light weight. Pure aluminum is soft and lacks strength, but alloyed with small amounts of copper, magnesium, silicon, manganese, or other elements impart a variety of useful properties. These alloys are of vital importance in the construction of modern aircraft and rockets. Aluminum, evaporated in a vacuum, forms a highly reflective coating for both visible light and radiant heat. They are used to coat telescope mirrors. Aluminum is available as metal and compounds with purities from 99% to 99.9999% (ACS grade to ultra-high purity); metals in the form of foil, sputtering target, and rod, and compounds as submicron and nanopowder. See Aluminum research below.
Dysprosium is a Block F, Group 3, Period 6 element. The number of electrons in each of Dysprosium's shells is 2, 8, 18, 28, 8, 2 and its electronic configuration is [Xe] 4f10 6s2. In its elemental form dysprosium's CAS number is 7429-91-6. The dysprosium atom has a radius of 175.2.pm and it's Van der Waals radius is unknown. Dysprosium is moderately toxic. Dysprosium is most commonly used in neodymium-iron-boron high strength permanent magnets. Dysprosium is available as metal and compounds with purities from 99% to 99.999% (ACS grade to ultra-high purity); metals in the form of foil, sputtering target, and rod, and compounds as submicron and nanopowder. While 
it has one of the highest magnetic moments of any of the rare earths (10.6µB), this has not resulted in an ability to perform on its own as a practical alternative to neodymium compositions. It is
however now an essential additive in NdFeB production. It is also used in special ceramic compositions based on BaTiO formulations. Recent research has examined the use of dysprosium in dysprosium-iron-garnet (DyIG) and silicon implanted with dysprosium and holmium to form donor centers. Dysprosium is added to various advanced optical formulations due to the fact that it emits in the 470-500 and 570-600 nm wavelengths. Dysprosium was first discovered by Paul Emile Lecoq de Boisbaudran in 1886. The element name originates from the Greek word 'dysprositos' meaning hard to get at. See Dysprosium research below.
