American Elements produces to many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopeia/British Pharmacopeia) and follows applicable ASTM testing standards.See safety data and research below and pricing/lead time above. American Elements specializes in producing high purity Aluminum Erbium Sputtering targets with the highest possible density and smallest possible average grain sizes for use in semiconductor, chemical vapor deposition (CVD) and physical vapor deposition (PVD) display and optical applications. Our standard Sputtering Targets for thin film are available monoblock or bonded with dimensions and configurations up to 820 mm with hole drill locations and threading, beveling, grooves and backing designed to work with both older sputtering devises as well as the latest process equipment, such as large area coating for solar energy or fuel cells and flip-chip applications. Research sized targets are also produced as well as custom sizes and alloys. All targets are analyzed using best demonstrated techniques including X-Ray Fluorescence (XRF), Glow Discharge Mass Spectrometry (GDMS), and Inductively Coupled Plasma (ICP). "Sputtering" allows for thin film deposition of an ultra high purity sputtering metallic or oxide material onto another solid substrate by the controlled removal and conversion of the target material into a directed gaseous/plasma phase through ionic bombardment. "Sputtering" allows for thin film deposition of an ultra high purity sputtering metallic or oxide material onto another solid substrate by the controlled removal and conversion of the target material into a directed gaseous/plasma phase through ionic bombardment. We can also provide targets outside this range in addition to just about any size rectangular, annular, or oval target. Materials are produced using crystallization, solid state and other ultra high purification processes such as sublimation. American Elements specializes in producing custom compositions for commercial and research applications and for new proprietary technologies. American Elements also casts any of the rare earth metals and most other advanced materials into rod, bar or plate form, as well as other machined shapes and through other processes nanoparticles. We also produce Aluminum as disc, granules, ingot, pellets, pieces, powder, and rod. Other shapes are available by request.
Aluminum is a Block P, Group 13, Period 3 element. The number of electrons in each of Aluminum's shells is 2, 8, 3 and its electronic configuration is [Ne] 3s2 3p1. In its elemental form aluminum's CAS number is 7429-90-5. The aluminum atom has a radius of 143.2.pm and it's Van der Waals radius is 200.pm. Aluminum is not known to be harmful but ingestion may cause Alzheimer's disease.Aluminum is a silvery-white metal that possesses many desirable characteristics. It is light, nonmagnetic and nonsparking.
It stands second among metals in the scale of malleability, and sixth in ductility. It is extensively used in many industrial applications where a strong, light, easily constructed material is needed. Although it's electrical conductivity is only about 60% that of copper, it is used in electrical transmission lines because of its light weight. Pure aluminum is soft and lacks strength, but alloyed with small amounts of copper, magnesium, silicon, manganese, or other elements impart a variety of useful properties. These alloys are of vital importance in the construction of modern aircraft and rockets. Aluminum, evaporated in a vacuum, forms a highly reflective coating for both visible light and radiant heat. They are used to coat telescope mirrors. Aluminum is available as metal and compounds with purities from 99% to 99.9999% (ACS grade to ultra-high purity); metals in the form of foil, sputtering target, and rod, and compounds as submicron and nanopowder. See Aluminum research below.
Erbium is a Block F, Group 3, Period 6 element. The number of electrons in each of Erbium's shells is 2, 8, 18, 30, 8, 2 and its electronic configuration is [Xe]4f12 6s2. In its elemental form erbium's CAS number is 7440-52-0. The erbium atom has a radius of 173.4.pm and it's Van der Waals radius is unknown. Erbium is moderately toxic. Erbium has application in glass coloring, as an amplifier in fiber optics, and in lasers for medical and dental use. Erbium is available as metal and compounds with purities from 99% to 99.999% (ACS grade to ultra-high purity); metals in the form of foil, sputtering target, and rod, and compounds as submicron and nanopowder. The ion has a very narrow absorption band coloring erbium salts pink. It is therefore used in eyeware and decorative glassware. It can neutralize discoloring impurities such as ferric ions and produce a neutral gray shade. It is used in a variety of glass products for this purpose. It is particularly useful as an amplifier for fiber optic data transfer. Erbium was first discovered by Carl Mosander in 1843. Erbium is named after the Swedish town, Ytterby. See Eribium research below.
PACKAGING SPECIFICATIONS FOR BULK & RESEARCH QUANTITIES
Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Shipping documentation includes a Certificate of Analysis and Material Safety Data Sheet (MSDS). Bullion and bar forms are best if purchasing solely for physical possession and risk exposure.
Characterisation of optically stimulated luminescence dosemeters to measure organ doses in diagnostic radiology.
Endo A, Katoh T, Kobayashi I, Joshi R, Sur J, Okano T.
Dentomaxillofac Radiol. 2011 Nov 24. [Epub ahead of print]
PMID:
22116136
[PubMed - as supplied by publisher]
Metal recovery from high-grade WEEE: A life cycle assessment.
Bigum M, Brogaard L, Christensen TH.
J Hazard Mater. 2011 Oct 17. [Epub ahead of print]
PMID:
22115841
[PubMed - as supplied by publisher]
Protein interactions with nanosized hydrotalcites of different composition.
Bellezza F, Alberani A, Posati T, Tarpani L, Latterini L, Cipiciani A.
J Inorg Biochem. 2011 Oct 8;106(1):134-142. [Epub ahead of print]
PMID:
22115829
[PubMed - as supplied by publisher]
Neurobehavioral toxic effects of perinatal oral exposure to aluminum on the developmental motor reflexes, learning, memory and brain neurotransmitters of mice offspring.
Abu-Taweel GM, Ajarem JS, Ahmad M.
Pharmacol Biochem Behav. 2011 Nov 13. [Epub ahead of print]
PMID:
22115621
[PubMed - as supplied by publisher]
Lithium-Ion Conducting Electrolyte Salts for Lithium Batteries.
Aravindan V, Gnanaraj J, Madhavi S, Liu HK.
Chemistry. 2011 Nov 24. doi: 10.1002/chem.201101486. [Epub ahead of print]
PMID:
22114046
[PubMed - as supplied by publisher]
Contact fatigue response of porcelain-veneered alumina model systems.
Stappert CF, Baldassarri M, Zhang Y, Stappert D, Thompson VP.
J Biomed Mater Res B Appl Biomater. 2011 Nov 24. doi: 10.1002/jbm.b.31977. [Epub ahead of print]
PMID:
22113973
[PubMed - as supplied by publisher]
Influence of formulation pH and suspension state on freezing-induced agglomeration of aluminum adjuvants.
Salnikova MS, Davis H, Mensch C, Celano L, Thiriot DS.
J Pharm Sci. 2011 Nov 23. doi: 10.1002/jps.22815. [Epub ahead of print]
PMID:
22113733
[PubMed - as supplied by publisher]
Evidence of foliar aluminium accumulation in local, regional and global datasets of wild plants.
Metali F, Salim KA, Burslem DF.
New Phytol. 2011 Nov 23. doi: 10.1111/j.1469-8137.2011.03965.x. [Epub ahead of print]
PMID:
22111583
[PubMed - as supplied by publisher]
Turning aluminium into a noble-metal-like catalyst for low-temperature activation of molecular hydrogen.
Chopra IS, Chaudhuri S, Veyan JF, Chabal YJ.
Nat Mater. 2011 Nov 23;10(12):986. doi: 10.1038/nmat3174. No abstract available.
PMID:
22109610
[PubMed - in process]
Fabrication of a dual-layer aluminum nanowires polarization filter array.
Gruev V.
Opt Express. 2011 Nov 21;19(24):24361-9. doi: 10.1364/OE.19.024361.
PMID:
22109463
[PubMed - in process]
Image-quality perception as a function of dose in digital radiography.
Lehnert T, Naguib NN, Korkusuz H, Bauer RW, Kerl JM, Mack MG, Vogl TJ.
AJR Am J Roentgenol. 2011 Dec;197(6):1399-403.
PMID:
22109295
[PubMed - in process]
Highly sensitive nano-porous lattice biosensor based on localized surface plasmon resonance and interference.
Yeom SH, Kim OG, Kang BH, Kim KJ, Yuan H, Kwon DH, Kim HR, Kang SW.
Opt Express. 2011 Nov 7;19(23):22882-91. doi: 10.1364/OE.19.022882.
PMID:
22109166
[PubMed - in process]
Regulatory role of zinc during aluminium-induced altered carbohydrate metabolism in rat brain.
Singla N, Dhawan DK.
J Neurosci Res. 2011 Nov 23. doi: 10.1002/jnr.22790. [Epub ahead of print]
PMID:
22108899
[PubMed - as supplied by publisher]
Three-shell-based lens barrel for the effective athermalization of an IR optical system.
Yang HS, Kihm H, Moon IK, Jung GJ, Choi SC, Lee KJ, Hwang HY, Kim SW, Lee YW.
Appl Opt. 2011 Nov 20;50(33):6206-13. doi: 10.1364/AO.50.006206.
PMID:
22108878
[PubMed - in process]
Influences of heat seal lacquer thickness on the quality of blister packages.
Mühlfeld L, Langguth P, Häusler H, Hagels H.
Eur J Pharm Sci. 2011 Nov 16. [Epub ahead of print]
PMID:
22108348
[PubMed - as supplied by publisher]
Efficient extraction of vaccines formulated in aluminum hydroxide gel by including surfactants in the extraction buffer.
Zhu D, Huang S, McClellan H, Dai W, Syed NR, Gebregeorgis E, Mullen GE, Long C, Martin LB, Narum D, Duffy P, Miller LH, Saul A.
Vaccine. 2011 Nov 18. [Epub ahead of print]
PMID:
22107848
[PubMed - as supplied by publisher]
Electronic structure investigation of highly compressed aluminum with k edge absorption spectroscopy.
Benuzzi-Mounaix A, Dorchies F, Recoules V, Festa F, Peyrusse O, Levy A, Ravasio A, Hall T, Koenig M, Amadou N, Brambrink E, Mazevet S.
Phys Rev Lett. 2011 Oct 14;107(16):165006. Epub 2011 Oct 13.
PMID:
22107398
[PubMed - in process]
Short-time electron dynamics in aluminum excited by femtosecond extreme ultraviolet radiation.
Medvedev N, Zastrau U, Förster E, Gericke DO, Rethfeld B.
Phys Rev Lett. 2011 Oct 14;107(16):165003. Epub 2011 Oct 12.
PMID:
22107395
[PubMed - in process]
Nanoporous Polymeric Nanofibers Based on Selectively Etched PS-b-PDMS Block Copolymers.
Birlik Demirel G, Buyukserin F, Morris MA, Demirel G.
ACS Appl Mater Interfaces. 2011 Nov 22. [Epub ahead of print]
PMID:
22107361
[PubMed - as supplied by publisher]
Low bias electron scattering in structure-identified single wall carbon nanotubes: role of substrate polar phonons.
Chandra B, Perebeinos V, Berciaud S, Katoch J, Ishigami M, Kim P, Heinz TF, Hone J.
Phys Rev Lett. 2011 Sep 30;107(14):146601. Epub 2011 Sep 28.
PMID:
22107221
[PubMed - in process]
Removal of Sea Urchin Spines Using Erbium-Doped Yttrium Aluminum Garnet Ablation.
Gungor S, Tarikçi N, Gokdemir G.
Dermatol Surg. 2011 Dec 30. doi: 10.1111/j.1524-4725.2011.02259.x. [Epub ahead of print] No abstract available.
PMID:
22211378
[PubMed - as supplied by publisher]
Laser and intense pulsed light management of couperose and rosacea.
Dahan S.
Ann Dermatol Venereol. 2011 Nov;138 Suppl 3:S219-22.
PMID:
22183103
[PubMed - in process]
In Solution Sensitization of Er(III) Luminescence by the 4-Tetrathiafulvalene-2,6-pyridinedicarboxylic Acid Dimethyl Antenna Ligand.
Pointillart F, Bourdolle A, Cauchy T, Maury O, Le Gal Y, Golhen S, Cador O, Ouahab L.
Inorg Chem. 2011 Dec 30. [Epub ahead of print]
PMID:
22208478
[PubMed - as supplied by publisher]
Selected Trace Elements in the Sacramento River, California: Occurrence and Distribution.
Taylor HE, Antweiler RC, Roth DA, Alpers CN, Dileanis P.
Arch Environ Contam Toxicol. 2011 Dec 23. [Epub ahead of print]
PMID:
22193863
[PubMed - as supplied by publisher]
Study about the effects of dental noises on the emotional experiences of children aged 6 to 10 years. A pilot study.
Birardi V, Pasini F.
Eur J Paediatr Dent. 2011 Dec;12(4):236-8.
PMID:
22185247
[PubMed - in process]
High-power polycrystalline Er:YAG ceramic laser at 1617 nm.
Zhang C, Shen DY, Wang Y, Qian LJ, Zhang J, Qin XP, Tang DY, Yang XF, Zhao T.
Opt Lett. 2011 Dec 15;36(24):4767-9. doi: 10.1364/OL.36.004767.
PMID:
22179877
[PubMed - in process]
Uranyl Sensitization of Samarium(III) Luminescence in a Two-Dimensional Coordination Polymer.
Knope KE, de Lill DT, Rowland CE, Cantos PM, de Bettencourt-Dias A, Cahill CL.
Inorg Chem. 2012 Jan 2;51(1):201-6. Epub 2011 Dec 15.
PMID:
22171660
[PubMed - in process]
Core/shell structured NaYF(4):Yb(3+)/Er(3+)/Gd(+3) nanorods with Au nanoparticles or shells for flexible amorphous silicon solar cells.
Li ZQ, Li XD, Liu QQ, Chen XH, Sun Z, Liu C, Ye XJ, Huang SM.
Nanotechnology. 2011 Dec 14;23(2):025402. [Epub ahead of print]
PMID:
22166792
[PubMed - as supplied by publisher]
Side effects and complications of fractional 1550-nm erbium fiber laser treatment among Asians.
Vaiyavatjamai P, Wattanakrai P.
J Cosmet Dermatol. 2011 Dec;10(4):313-6. doi: 10.1111/j.1473-2165.2011.00585.x.
PMID:
22151942
[PubMed - in process]
Skin characteristics after fractional photothermolysis.
Oh BH, Hwang YJ, Lee YW, Choe YB, Ahn KJ.
Ann Dermatol. 2011 Nov;23(4):448-54. Epub 2011 Nov 3.
PMID:
22148011
[PubMed - in process]
Novel heterometal-organic complexes as first single source precursors for up-converting NaY(Ln)F(4) (Ln = Yb, Er, Tm) nanomaterials.
Mishra S, Ledoux G, Jeanneau E, Daniele S, Joubert MF.
Dalton Trans. 2011 Dec 2. [Epub ahead of print]
PMID:
22134711
[PubMed - as supplied by publisher]
The Efficacy of Er,Cr:YSGG Laser in Reconditioning of Metallic Orthodontic Brackets.
Ahrari F, Basafa M, Fekrazad R, Mokarram M, Akbari M.
Photomed Laser Surg. 2012 Jan;30(1):41-6. Epub 2011 Dec 1.
PMID:
22133152
[PubMed - in process]
Electrically pumped silicon waveguide light sources.
Jayatilleka H, Nasrollahy-Shiraz A, Kenyon AJ.
Opt Express. 2011 Nov 21;19(24):24569-76. doi: 10.1364/OE.19.024569.
PMID:
22109485
[PubMed - in process]
Characteristics of rational harmonic mode-locked short-cavity fiber ring laser using a bismuth-oxide-based erbium-doped fiber and a bismuth-oxide-based highly nonlinear fiber.
Fukuchi Y, Maeda J.
Opt Express. 2011 Nov 7;19(23):22502-9. doi: 10.1364/OE.19.022502.
PMID:
22109128
[PubMed - in process]
Generation of 120-fs laser pulses at 1-GHz repetition rate derived from continuous wave laser diode.
Ishizawa A, Nishikawa T, Mizutori A, Takara H, Nakano H, Sogawa T, Takada A, Koga M.
Opt Express. 2011 Nov 7;19(23):22402-9. doi: 10.1364/OE.19.022402.
PMID:
22109116
[PubMed - in process]
Multiwavelength Brillouin fiber laser with enhanced reverse-S-shaped feedback coupling assisted by out-of-cavity optical amplifier.
Rahman ZA, Hitam S, Al-Mansoori MH, Abas AF, Mahdi MA.
Opt Express. 2011 Oct 24;19(22):21238-45. doi: 10.1364/OE.19.021238.
PMID:
22108976
[PubMed - in process]
Effects of Dentin Surface Modifications Treated with Er:YAG and Nd:YAG Laser Irradiation on Fibroblast Cell Adhesion.
Bolortuya G, Ebihara A, Ichinose S, Watanabe S, Anjo T, Kokuzawa C, Saegusa H, Kawashima N, Suda H.
Photomed Laser Surg. 2011 Nov 22. [Epub ahead of print]
PMID:
22107609
[PubMed - as supplied by publisher]
Treatment of Melasma Using a Novel 1,927-nm Fractional Thulium Fiber Laser: A Pilot Study.
Polder KD, Bruce S.
Dermatol Surg. 2011 Oct 10. doi: 10.1111/j.1524-4725.2011.02178.x. [Epub ahead of print]
PMID:
22093448
[PubMed - as supplied by publisher]
Letter: successful treatment of multiple miliary osteomas of the face using an erbium-doped yttrium aluminum garnet laser.
Ortiz AE, Ross EV.
Dermatol Surg. 2011 Oct;37(10):1548-50. doi: 10.1111/j.1524-4725.2011.02112.x. No abstract available.
PMID:
22092945
[PubMed - indexed for MEDLINE]
and smallest possible average grain sizes for use in semiconductor, chemical vapor deposition (CVD) and physical vapor deposition (PVD) display and optical applications. Our standard Sputtering Targets for thin film are available monoblock or bonded with dimensions and configurations up to 820 mm with hole drill locations and threading, beveling, grooves and backing designed to work with both older sputtering devises as well as the latest process equipment, such as large area coating for solar energy or fuel cells and flip-chip applications. Research sized targets are also produced as well as custom sizes and alloys. All targets are analyzed using best demonstrated techniques including X-Ray Fluorescence (XRF), Glow Discharge Mass Spectrometry (GDMS), and Inductively Coupled Plasma (ICP). "Sputtering" allows for thin film deposition of an ultra high purity sputtering metallic or oxide material onto another solid substrate by the controlled removal and conversion of the target material into a directed gaseous/plasma phase through ionic bombardment. "Sputtering" allows for thin film deposition of an ultra high purity sputtering metallic or oxide material onto another solid substrate by the controlled removal and conversion of the target material into a directed gaseous/plasma phase through ionic bombardment. We can also provide targets outside this range in addition to just about any size rectangular, annular, or oval target. Materials are produced using crystallization, solid state and other ultra high purification processes such as sublimation. American Elements specializes in producing custom compositions for commercial and research applications and for new proprietary technologies. American Elements also casts any of the rare earth metals and most other advanced materials into rod, bar or plate form, as well as other machined shapes and through other processes nanoparticles. We also produce Aluminum as disc, granules, ingot, pellets, pieces, powder, and rod. Other shapes are available by request.
Aluminum is a Block P, Group 13, Period 3 element. The number of electrons in each of Aluminum's shells is 2, 8, 3 and its electronic configuration is [Ne] 3s2 3p1. In its elemental form aluminum's CAS number is 7429-90-5. The aluminum atom has a radius of 143.2.pm and it's Van der Waals radius is 200.pm. Aluminum is not known to be harmful but ingestion may cause Alzheimer's disease.Aluminum is a silvery-white metal that possesses many desirable characteristics. It is light, nonmagnetic and nonsparking.
It stands second among metals in the scale of malleability, and sixth in ductility. It is extensively used in many
industrial applications where a strong, light, easily constructed material is needed. Although it's electrical conductivity is only about 60% that of copper, it is used in electrical transmission 
lines because of its light weight. Pure aluminum is soft and lacks strength, but alloyed with small amounts of copper, magnesium, silicon, manganese, or other elements impart a variety of useful properties. These alloys are of vital importance in the construction of modern aircraft and rockets. Aluminum, evaporated in a vacuum, forms a highly reflective coating for both visible light and radiant heat. They are used to coat telescope mirrors. Aluminum is available as metal and compounds with purities from 99% to 99.9999% (ACS grade to ultra-high purity); metals in the form of foil, sputtering target, and rod, and compounds as submicron and nanopowder. See Aluminum research below. 
Erbium is a Block F, Group 3, Period 6 element. The number of electrons in each of Erbium's shells is 2, 8, 18, 30, 8, 2 and its electronic configuration is [Xe]4f12 6s2. In its elemental form erbium's CAS number is 7440-52-0. The erbium atom has a radius of 173.4.pm and it's Van der Waals radius is unknown. Erbium is moderately toxic. Erbium has application in glass coloring, as an amplifier in fiber optics, and in lasers for medical and dental use.
Erbium is 
available as metal and compounds with purities from 99% to 99.999% (ACS grade to ultra-high purity); metals in the form of foil, sputtering target, and rod, and compounds as submicron and nanopowder. The ion has a very narrow absorption band coloring erbium salts pink. It is therefore used in eyeware and decorative glassware. It can neutralize discoloring impurities such as ferric ions and produce a neutral gray shade. It is used in a variety of glass products for this purpose. It is particularly useful as an amplifier for fiber optic data transfer. Erbium was first discovered by Carl Mosander in 1843. Erbium is named after the Swedish town, Ytterby. See Eribium research below.
