Cadmium Antimonide

CAS #:

Linear Formula:

Cd3Sb2

MDL Number:

N/A

EC No.:

234-596-0

ORDER

PRODUCT Product Code ORDER SAFETY DATA TECHNICAL DATA
(5N) 99.999% Cadmium Antimonide Ingot
CD3-SB-05-I
Pricing > SDS > Data Sheet >
(5N) 99.999% Cadmium Antimonide Lump
CD3-SB-05-L
Pricing > SDS > Data Sheet >
(5N) 99.999% Cadmium Antimonide Powder
CD3-SB-05-P
Pricing > SDS > Data Sheet >
(5N) 99.999% Cadmium Antimonide Sputtering Target
CD3-SB-05-ST
Pricing > SDS > Data Sheet >
(5N) 99.999% Cadmium Antimonide Wafer
CD3-SB-05-WF
Pricing > SDS > Data Sheet >

Cadmium Antimonide Properties (Theoretical)

Compound Formula Cd3Sb2
Molecular Weight 580.75
Appearance Crystalline
Melting Point N/A
Boiling Point N/A
Density N/A
Solubility in H2O N/A
Exact Mass 583.517507
Monoisotopic Mass 583.51771

Cadmium Antimonide Health & Safety Information

Signal Word N/A
Hazard Statements N/A
Hazard Codes N/A
Risk Codes N/A
Safety Statements N/A
Transport Information N/A

View and Print SDS

SAFETY DATA SHEET

Date Accessed: 04/15/2024
Date Revised:01/15/2022

SECTION 1. IDENTIFICATION

Product Name: Cadmium Antimonide

Product Number: All applicable American Elements product codes, e.g. CD3-SB-05-I , CD3-SB-05-L , CD3-SB-05-P , CD3-SB-05-ST , CD3-SB-05-WF

CAS #: 12014-29-8

Relevant identified uses of the substance: Scientific research and development

Supplier details:
American Elements
10884 Weyburn Ave.
Los Angeles, CA 90024
Tel: +1 310-208-0551
Fax: +1 310-208-0351

Emergency telephone number:
Domestic, North America: +1 800-424-9300
International: +1 703-527-3887


SECTION 2. HAZARDS IDENTIFICATION

CLASSIFICATION OF SUBSTANCE OR MIXTURE

Exclamation Mark - GHS07

Pictogram
Signal Word Warning
Hazard Statements
H302+H312+H332 Harmful if swallowed, in contact with skin, or if inhaled.
Precautionary Phrases
P261 Avoid breathing dust/fume/gas/mist/vapors/spray.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P301+P312 IF SWALLOWED: Call a POISON CENTER/doctor/physician if you feel unwell.
HMIS CLASSIFICATION:
Health: 2 Fire: 0 Reactivity Hazard: 1
NFPA RATING:
Health: 2 Flammability: 0 Reactivity Hazard: 1
EYE CONTACT: Causes irritation of the eyes.
SKIN CONTACT: Harmful in contact with skin.
INHALATION: Harmful if inhaled.
INGESTION: Harmful if swallowed.


SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS

Formula: CdSb
Molecular Weight: 234.16
CHEMICAL NAME CAS# %
Cadmium Antimonide 12050-27-0 100


SECTION 4. FIRST AID MEASURES

EYE EXPOSURE: Immediately flush the eyes with copious amounts of water for at least 15 minutes. Assure flushing under
eyelids. A victim may need assistance in keeping their eyelids open. Get immediate competent medical attention.
SKIN EXPOSURE: Wash affected area with water. Remove contaminated clothes if necessary. Seek medical assistance if
irritation persists.
INHALATION: Remove to fresh air and keep at rest. Closely monitor the victim for signs of respiratory problems, such as
difficulty in breathing, coughing, wheezing, or pain. In such cases, seek immediate medical assistance.
INGESTION: Seek medical attention immediately.


SECTION 5. FIREFIGHTING MEASURES

FLASH POINT: Product is not flammable.
Autoignition: Not available
EXPLOSION LIMITS: This product does not present an explosion hazard.
EXTINGUISHING MEDIUM: Use fire fighting measures that suit the surrounding fire.
SPECIAL FIRE FIGHTING PROCEDURES: Wear self-contained, approved breathing apparatus and full protective clothing,
including eye protection and boots.
HAZARDOUS COMBUSTION AND DECOMPOSITION PRODUCTS: Cadmium oxide and antimony oxide.


SECTION 6. ACCIDENTAL RELEASE MEASURES

PERSONAL PRECAUTIONS: Wear all appropriate equipment when using this material. Ensure adequate ventilation. Keep unprotected
persons away.
ENVIRONMENTAL PRECAUTIONS: Prevent spillage from entering drains or allowing to be released into the environment.
METHODS AND MATERIALS FOR CONTAINMENT AND CLEANING UP: Pick up and arrange disposal without creating dust. Sweep
up and keep in suitable, closed containers for disposal.


SECTION 7. HANDLING AND STORAGE

PRECAUTIONS FOR SAFE HANDLING: Wear appropriate personal protective equipment. Use with adequate ventilation. Avoid
contact with skin and eyes. Avoid formation of dust.
CONDITIONS FOR SAFE STORAGE: Store in cool, dry, and well-ventilated area. Store away from oxidizing agents.


SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION

EXPOSURE CONTROLS:
Component Exposure Limits Basis Entity
Cadmium Antimonide 0.5 mg/m3 TLV ACGIH
0.5 mg/m3 PEL OSHA
0.002 mg/m3 TLV ACGIH
0.002 mg/m3 PEL OSHA
PEL: Permissible Exposure Limit TLV: Threshold Limit Value over 8 hours of work.
EYE PROTECTION: Wear chemical safety glasses or goggles and face shield.
SKIN PROTECTION: Wear nitrile or rubber gloves, apron, or lab coat.
VENTILATION: Provide local exhaust, preferably mechanical.
RESPIRATOR: Use an approved respirator.
ADDITIONAL PROTECTION: Provide eyewash stations, quick-drench showers and washing facilities accessible to areas of use and
handling.


SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES

COLOR AND FORM: Black solid
ODOR: None
MOLECULAR WEIGHT: 234.16
BOILING POINT: No data available
MELTING POINT: Not available
SPECIFIC GRAVITY: 6.92 gm/ml
VAPOR DENSITY: No data available
SOLUBILITY: Insoluble


SECTION 10. STABILITY AND REACTIVITY

STABILITY: Stable
HAZARDOUS POLYMERIZATION: Will not occur
CONDITIONS TO AVOID: None known
INCOMPATIBILITY: Strong oxidizing agents
DECOMPOSITION PRODUCTS: Cadmium oxide and antimony oxide


SECTION 11. TOXICOLOGICAL INFORMATION

ACUTE TOXICITY: Not available
CARCINOGENIC EFFECTS: Carcinogenic to humans.
MUTAGENIC EFFECTS: Not available
TETRATOGENIC EFFECTS: Not available
RTECS: Not available
Antimony compounds may cause metallic taste, gastrointestinal disturbances, vomiting, diarrhea, dizziness, and systemic poisoning.
Chronic exposure may cause liver and kidney damage. Dermatitis and eczematous skin eruptions may result from skin contact.
Cadmium compounds are highly toxic and experimental carcinogens. Exposure affects the respiratory tract, kidneys, and liver.
Ingestion may cause nausea, salivation, vomiting, and diarrhea. Ingestion or inhalation of cadmium compounds may be fatal.
To the best of our knowledge the toxicological effects of this compound have not been fully investigated.


SECTION 12. ECOLOGICAL INFORMATION

Very toxic for aquatic organisms. May cause long lasting harmful effects to aquatic life. Also poisonous for fish and plankton in water
bodies. Danger to drinking water if even extremely small quantities leak into the ground.


SECTION 13. DISPOSAL CONSIDERATIONS

Dispose of in according to local, state, and federal regulations.


SECTION 14. TRANSPORT INFORMATION

UN2570 UN2570
Cadmium compounds, n.o.s. Cadmium compound, n.o.s.
(cadmium antimonide) (cadmium antimonide)
Class 6.1 Class 6.1
PG III PG III
Marine Pollutant: No


SECTION 15. REGULATORY INFORMATION

SARA (TITLE 313): Cadmium antimonide
CALIFORNIA PROP. 65: Cadmium antimonide


SECTION 16. OTHER INFORMATION

Safety Data Sheet according to Regulation (EC) No. 1907/2006 (REACH). The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any guarantee of the properties of the product. American Elements shall not be held liable for any damage resulting from handling or from contact with the above product. See reverse side of invoice or packing slip for additional terms and conditions of sale. COPYRIGHT 1997-2022 AMERICAN ELEMENTS. LICENSED GRANTED TO MAKE UNLIMITED PAPER COPIES FOR INTERNAL USE ONLY.

About Cadmium Antimonide

Antimonide IonCadmium Antimonide is a crystalline solid used as a semiconductor and in photo optic applications. Antimonide compounds (or stibnides) contain the element Antimony. Their unique lattice structures are being utilized in the most cutting-edge semiconductor materials by scientists and technology researchers; for example, in January 2013, researchers at Northwestern University's Center for Quantum Devices created the first-ever dual-mode active and passive infrared camera chip made of Indium Arsenide/Gallium Antimonide. American Elements produces to many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia) and follows applicable ASTM testing standards. Typical and custom packaging is available. Additional technical, research and safety (MSDS) information is available as is a Reference Calculator for converting relevant units of measurement.

Cadmium Antimonide Synonyms

Antimony, compd. with cadmium (2:3), tricadmium diantimonide

Chemical Identifiers

Linear Formula Cd3Sb2
MDL Number N/A
EC No. 234-596-0
Beilstein/Reaxys No. N/A
Pubchem CID 6336873
IUPAC Name antimony; cadmium
SMILES [Cd].[Cd].[Cd].[Sb].[Sb]
InchI Identifier InChI=1S/3Cd.2Sb.6H
InchI Key DBDIJTYREYEBFF-UHFFFAOYSA-N

Packaging Specifications

Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Shipping documentation includes a Certificate of Analysis and Safety Data Sheet (SDS). Solutions are packaged in polypropylene, plastic or glass jars up to palletized 440 gallon liquid totes, and 36,000 lb. tanker trucks.

Related Elements

Cadmium

See more Cadmium products. Cadmium (atomic symbol: Cd, atomic number: 48) is a Block D, Group 12, Period 5 element with an atomic weight of 112.411. Cadmium Bohr ModelThe number of electrons in each of Cadmium's shells is 2, 8, 18, 18, 2 and its electron configuration is [Kr]4d10 5s2. The cadmium atom has a radius of 151 pm and a Van der Waals radius of 230 pm. Cadmium was discovered and first isolated by Karl Samuel Leberecht Hermann and Friedrich Stromeyer in 1817. In its elemental form, cadmium has a silvery bluish gray metallic appearance. Cadmium makes up about 0.1 ppm of the earth's crust. Elemental CadmiumNo significant deposits of cadmium containing ores are known, however, it is sometimes found in its metallic form. It is a common impurity in zinc ores and is isolated during the production of zinc. Cadmium is a key component in battery production and particular pigments and coatings due to its distinct yellow color. Cadmium oxide is used in phosphors for television picture tubes. The name Cadmium originates from the Latin word 'cadmia' and the Greek word 'kadmeia'.

Antimony

See more Antimony products. Antimony (atomic symbol: Sb, atomic number: 51) is a Block P, Group 15, Period 5 element with an atomic radius of 121.760. Antimony Bohr Model The number of electrons in each of antimony's shells is 2, 8, 18, 18, 5 and its electron configuration is [Kr] 4d10 5s2 5p3. The antimony atom has a radius of 140 pm and a Van der Waals radius of 206 pm. Antimony was discovered around 3000 BC and first isolated by Vannoccio Biringuccio in 1540 AD. In its elemental form, antimony has a silvery lustrous gray appearance. Elemental Antimony The most common source of antimony is the sulfide mineral known as stibnite (Sb2S3), although it sometimes occurs natively as well. Antimony has numerous applications, most commonly in flame-retardant materials. It also increases the hardness and strength of lead when combined in an alloy and is frequently employed as a dopant in semiconductor materials. Its name is derived from the Greek words anti and monos, meaning a metal not found by itself.

TODAY'S TOP DISCOVERY!

April 15, 2024
Los Angeles, CA
Each business day American Elements' scientists & engineers post their choice for the most exciting materials science news of the day
University of Waterloo IQC researchers efficiently produce nearly perfect entangled photon pairs from quantum dot sources

University of Waterloo IQC researchers efficiently produce nearly perfect entangled photon pairs from quantum dot sources