Copper is a Block D, Group 11, Period 4 element. The electronic configuration is [Ar] 3d¹⁰ 4s¹. In its elemental form copper's CAS number is 7440-50-8. The copper atom has a radius of 127.8 .pm and it's Van der Waals radius is 140.pm. Due to its high electrical conductivity, large amounts of copper are used by the electrical industry for wire. Of all pure metals, only silver has a higher electrical conductivity. Copper is also resistant to corrosion caused by moisture, making it a widely used material in pipes, coins, and jewelry. Copper is often too soft for its applications, so it is incorporated in numerous alloys. For example, brass is a copper-zinc alloy, and bronze is a copper-tin alloy. Copper sulfate (CuSO 4·H2O), also known as blue vitrol, is the most well-known copper compound. It is used as an agricultural poison, an algicide, and as a pigment for inks. Cuprous chloride (CuCl) is a powder used to absorb carbon dioxide (CO2). Copper cyanide (CuCN) is often used in electroplating applications. Copper is available as metal and compounds with purities from 99% to 99.9999% (ACS grade to ultra-high purity); metals in the form of foil, sputtering target, and rod, and compounds as submicron and nanopowder.

Indium is a Block P, Group 13, Period 5 element. The electronic configuration is [Kr] 4d¹⁰ 5s² 5p¹. In its elemental form indium's CAS number is 7440-74-6. The indium atom has a radius of 162.6.pm and it's Van der Waals radius is 193.pm. Indium has found application in semi-conductor materials and other electronic applications. It is used to make low-melting alloys, such as an alloy of 24% indium - 76% Indium is liquid at room temperature. It is used in making bearing alloys, germanium transistors, rectifiers, and photoconductors. It can be plated onto metal and evaporated onto glass, forming a mirror as good as that made with silver but with more resistance to atmospheric corrosion.

Gallium is a Block P, Group 13, Period 4 element. The electronic configuration is [Ar] 3d¹⁰ 4s² 4p¹. In its elemental form gallium's CAS number is 7440-55-3. The gallium atom has a radius of 122.1.pm and it's Van der Waals radius is 187.pm. Gallium is one of three elements that naturally occur as a liquid at room temperature. The other two are mercury and cesium. The application of gallium that has received the most attention is the production of semiconducting compounds. Of these, the most important are the compounds of gallium with antimony, arsenic or phosphor. Nowadays gallium arsenide (Ga-As) is undoubtedly the most used. This compound is used in the production of several electronic parts such as diodes and transistors, made for voltage rectification, signal amplification, etc. Other gallium arsenide applications are the semiconductor "lasing" and microwave generation and also in sensors to measure temperature, light or magnetic field.

Selenium is a Block P, Group 16, Period 4 element. The electronic configuration is [Ar] 3d¹⁰ 4s² 4p⁴. In its elemental form selenium's CAS number is 7782-49-2. The selenium atom has a radius of 116.pm and it's Van der Waals radius is 190.pm. Selenium exhibits both photovoltaic action, where light is converted directly into electricity, and photoconductive action, where the electrical resistance decreases with increased illumination. These properties make selenium useful in the production of photocells and exposure meters for photographic use, as well as solar cells. Below its melting point, selenium is a p-type semiconductor and has many uses in electronic and solid-state applications. Selenium is available as metal and compounds with purities from 99% to 99.9999% (ACS grade to ultra-high purity); metals in the form of foil, sputtering target, and rod, and compounds as submicron and nanopowder. Selenium was first discovered by Jons Berzelius in 1817.

American Elements semi conducting materials are crystal structures produced from ultra high purity starting materials synthesized by our high purity production facility which includes several large electric muffle furnaces, a tube furnace for hydrogen reduction, 50 gallon glass-lined Pfaudler reactors supported by our analytical laboratory containing X-ray diffraction, SEM, AA, BET surface area, and ICP Spectrometry for trace metals analysis. See a discussion of American Elements Ultra High Purity and Analytical capabilities. See Crystal Growth for processes used to fabricate semiconductor materials, which include: