Diamond Monocrystalline Powder

CAS #:

Linear Formula:

C

MDL Number:

MFCD00211867

EC No.:

231-953-2

ORDER

PRODUCT Product Code ORDER SAFETY DATA TECHNICAL DATA
Diamond Monocrystalline Powder
C-D-01-P.MXTAL
Pricing > SDS > Data Sheet >

Diamond Monocrystalline Powder Properties (Theoretical)

Molecular Weight 12.01
Appearance Light gray to green powder
Melting Point 3,727 °C
Boiling Point Sublimes
Density 3.5 g/cm3
Average Particle Size ~1 µm
Solubility in H2O N/A
Exact Mass 12
Monoisotopic Mass 12

Diamond Monocrystalline Powder Health & Safety Information

Signal Word N/A
Hazard Statements N/A
Hazard Codes N/A
Auto-Ignition Temperature >420 °C (760 mmHg)
Risk Codes N/A
Safety Statements N/A
Transport Information NONH for all modes of transport

View and Print SDS

SAFETY DATA SHEET

Date Accessed: 03/29/2024
Date Revised:01/15/2022

SECTION 1. IDENTIFICATION

Product Name: Diamond Monocrystalline Powder

Product Number: All applicable American Elements product codes, e.g. C-D-01-P.MXTAL

CAS #: 7782-40-3

Relevant identified uses of the substance: Scientific research and development

Supplier details:
American Elements
10884 Weyburn Ave.
Los Angeles, CA 90024
Tel: +1 310-208-0551
Fax: +1 310-208-0351

Emergency telephone number:
Domestic, North America: +1 800-424-9300
International: +1 703-527-3887


SECTION 2. HAZARDS IDENTIFICATION

Classification of the substance or mixture Not a hazardous substance or mixture. GHS Label elements, including precautionary statements Not a hazardous substance or mixture. Hazards not otherwise classified (HNOC) or not covered by GHS-none

SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS

Substances Chemical characterization: Product does not burn Formula: C Molecular Weight: 12.01 g/mol CAS-No.: 7782-40-3 EC-No.: 231-953-2 No ingredients are hazardous according to OSHA criteria. No components need to be disclosed according to the applicable regulations.

SECTION 4. FIRST AID MEASURES

Description of first aid measures General advice Consult a physician. Show this safety data sheet to the doctor in attendance. If inhaled If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician. In case of skin contact Wash off with soap and plenty of water. Consult a physician. In case of eye contact Flush eyes with water as a precaution. If swallowed Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician. Most important symptoms and effects, both acute and delayed The most important known symptoms and effects are described in the labelling (see section 2) and/or in section 11 Indication of any immediate medical attention and special treatment needed no data available

SECTION 5. FIREFIGHTING MEASURES

Extinguishing media Suitable extinguishing media Use extinguishing measures that are appropriate to local circumstances and the surrounding environment. Special hazards arising from the substance or mixture Carbon oxides Advice for firefighters Wear self contained breathing apparatus for fire fighting if necessary. Further information The product itself does not burn.

SECTION 6. ACCIDENTAL RELEASE MEASURES

Personal precautions, protective equipment and emergency procedures Use personal protective equipment. Avoid dust formation. Avoid breathing vapors, mist or gas. Avoid breathing dust. For personal protection see section 8. Environmental precautions No special environmental precautions required. Methods and materials for containment and cleaning up Pick up and arrange disposal without creating dust. Sweep up and shovel. Keep in suitable, closed containers for disposal. Reference to other sections For disposal see section 13.

SECTION 7. HANDLING AND STORAGE

Precautions for safe handling Further processing of solid materials may result in the formation of combustible dusts. The potential for combustible dust formation should be taken into consideration before additional processing occurs. Provide appropriate exhaust ventilation at places where dust is formed. For precautions see section 2. Conditions for safe storage, including any incompatibilities Keep container tightly closed in a dry and well-ventilated place. Keep in a dry place. Specific end use(s) Apart from the uses mentioned in section 1 no other specific uses are stipulated

SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION

Control parameters Components with workplace control parameters Contains no substances with occupational exposure limit values. Exposure controls Appropriate engineering controls Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday. Personal protective equipment Eye/face protection Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Skin protection Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands. Body Protection Choose body protection in relation to its type, to the concentration and amount of dangerous substances, and to the specific work-place., The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace. Respiratory protection Respiratory protection is not required. Where protection from nuisance levels of dusts are desired, use type N95 (US) or type P1 (EN 143) dust masks. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU). Control of environmental exposure No special environmental precautions required.

SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES

Information on basic physical and chemical properties Appearance Form: Powder Colour: light green Odor odourless Odor Threshold no data available pH no data available Melting point/freezing point 3,727 °C (6,741 °F) Initial boiling point and boiling range no data available Flash point not applicable Evaporation rate no data available Flammability (solid, gas) no data available Upper/lower flammability or explosive limits no data available Vapor pressure no data available Vapor density no data available Relative density 3.5 g/mL at 25 °C (77 °F) Water solubility insoluble Partition coefficient: n-octanol/water no data available Auto-ignition temperature > 420 °C (> 788 °F) at 1,013 hPa (760 mmHg) Decomposition temperature no data available Viscosity no data available Explosive properties no data available Oxidizing properties no data available Other safety information no data available

SECTION 10. STABILITY AND REACTIVITY

Reactivity no data available Chemical stability Stable under recommended storage conditions. Possibility of hazardous reactions no data available Conditions to avoid no data available Incompatible materials Strong oxidizing agents Hazardous decomposition products Other decomposition products-no data available In the event of fire: see section 5

SECTION 11. TOXICOLOGICAL INFORMATION

Information on toxicological effects Acute toxicity LD50 Oral-mouse-10,000 mg/kg Remarks: Behavioral:Somnolence (general depressed activity). LD50 Oral-rat-female- > 2,000 mg/kg (OECD Test Guideline 423) Inhalation: no data available no data available Skin corrosion/irritation no data available Serious eye damage/eye irritation no data available Respiratory or skin sensitisation no data available Germ cell mutagenicity in vitro assay S. typhimurium Result: negative Carcinogenicity IARC: No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC. ACGIH: No component of this product present at levels greater than or equal to 0.1% is identified as a carcinogen or potential carcinogen by ACGIH. NTP: No component of this product present at levels greater than or equal to 0.1% is identified as a known or anticipated carcinogen by NTP. OSHA: No component of this product present at levels greater than or equal to 0.1% is identified as a carcinogen or potential carcinogen by OSHA. Reproductive toxicity no data available no data available Specific target organ toxicity -single exposure no data available Specific target organ toxicity -repeated exposure no data available Aspiration hazard no data available Additional Information RTECS: Not available To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly investigated.

SECTION 12. ECOLOGICAL INFORMATION

Toxicity Toxicity to fish static testLC50-Oncorhynchus mykiss (rainbow trout)- > 100 mg/l-96 h(OECD Test Guideline 203) Toxicity to daphnia and other aquatic invertebrates static test EC50-Daphnia magna (Water flea)-> 100 mg/l-48 h(OECD Test Guideline 202) Persistence and degradability: no data available Bioaccumulative potential: no data available Mobility in soil: no data available Results of PBT and vPvB assessment: PBT/vPvB assessment not available as chemical safety assessment not required/not conducted Other adverse effects no data available

SECTION 13. DISPOSAL CONSIDERATIONS

Waste treatment methods Product Offer surplus and non-recyclable solutions to a licensed disposal company. Contaminated packaging Dispose of as unused product.

SECTION 14. EXPOSURE CONTROLS/PERSONAL PROTECTION

DOT (US) Not dangerous goods IMDG Not dangerous goods IATA Not dangerous goods

SECTION 15. REGULATORY INFORMATION

SARA 302 Components SARA 302: No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302. SARA 313 Components SARA 313: This material does not contain any chemical components with known CAS numbers that exceed the threshold (De Minimis) reporting levels established by SARA Title III, Section 313. SARA 311/312 Hazards No SARA Hazards Massachusetts Right To Know Components No components are subject to the Massachusetts Right to Know Act. Pennsylvania Right To Know Components Diamond CAS-No. 7782-40-3 New Jersey Right To Know Components Diamond CAS-No. 7782-40-3 California Prop. 65 Components This product does not contain any chemicals known to State of California to cause cancer, birth defects, or any other reproductive harm.

SECTION 16. OTHER INFORMATION

Safety Data Sheet according to Regulation (EC) No. 1907/2006 (REACH). The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any guarantee of the properties of the product. American Elements shall not be held liable for any damage resulting from handling or from contact with the above product. See reverse side of invoice or packing slip for additional terms and conditions of sale. COPYRIGHT 1997-2022 AMERICAN ELEMENTS. LICENSED GRANTED TO MAKE UNLIMITED PAPER COPIES FOR INTERNAL USE ONLY.

About Diamond Monocrystalline Powder

Diamond Monocrystalline Powder is generally immediately available in most volumes, including bulk quantities. American Elements can produce most materials in high purity and ultra high purity (up to 99.99999%) forms and follows applicable ASTM testing standards; a range of grades are available including Mil Spec (military grade), ACS, Reagent and Technical Grade, Food, Agricultural and Pharmaceutical Grade, Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia). We can also produce materials to custom specifications by request, in addition to custom compositions for commercial and research applications and new proprietary technologies. Typical and custom packaging is available, as is additional research, technical and safety (MSDS) data. Please contact us above for information on specifications, lead time and pricing.

Diamond Monocrystalline Powder Synonyms

N/A

Chemical Identifiers

Linear Formula C
MDL Number MFCD00211867
EC No. 231-953-2
Beilstein/Reaxys No. N/A
Pubchem CID 5462310
IUPAC Name Carbon
SMILES [C]
InchI Identifier InChI=1S/C
InchI Key OKTJSMMVPCPJKN-UHFFFAOYSA-N

Packaging Specifications

Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Shipping documentation includes a Certificate of Analysis and Safety Data Sheet (SDS). Solutions are packaged in polypropylene, plastic or glass jars up to palletized 440 gallon liquid totes, and 36,000 lb. tanker trucks.

Related Elements

Carbon

See more Carbon products. Carbon (atomic symbol: C, atomic number: 6) is a Block P, Group 14, Period 2 element. Carbon Bohr ModelThe number of electrons in each of Carbon's shells is 2, 4 and its electron configuration is [He]2s2 2p2. In its elemental form, carbon can take various physical forms (known as allotropes) based on the type of bonds between carbon atoms; the most well known allotropes are diamond, graphite, amorphous carbon, glassy carbon, and nanostructured forms such as carbon nanotubes, fullerenes, and nanofibers . Carbon is at the same time one of the softest (as graphite) and hardest (as diamond) materials found in nature. It is the 15th most abundant element in the Earth's crust, and the fourth most abundant element (by mass) in the universe after hydrogen, helium, and oxygen. Carbon was discovered by the Egyptians and Sumerians circa 3750 BC. It was first recognized as an element by Antoine Lavoisier in 1789.

TODAY'S TOP DISCOVERY!

March 29, 2024
Los Angeles, CA
Each business day American Elements' scientists & engineers post their choice for the most exciting materials science news of the day
U.S. DOE scientists convert carbon monoxide into methanol using cascade reaction strategy

U.S. DOE scientists convert carbon monoxide into methanol using cascade reaction strategy