American Elements specializes in producing high purity Europium discs with the highest possible densityand smallest possible average grain sizes for use in semiconductor, chemical vapor deposition (CVD) and physical vapor deposition (PVD) display and optical applications. Our standard disc sizes range from 1" to 8" in diameter and from 2mm to 1/2" thick. We can also provide Discs outside this range. Materials are produced using crystallization, solid state and other ultra high purification processes such as sublimation. American Elements specializes in producing custom compositions for commercial and research applications and for new proprietary technologies. American Elements also casts any of the rare earth metals and most other advanced materials into rod, bar or plate form, as well as other machined shapes and through other processes such as nanoparticles (See also application discussion at Nanotechnology Information and at Quantum Dots) and in the form of solutions and organometallics.American Elements produces to many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia)and follows applicable ASTM testing standards.Typical and custom packaging is available. See safety data and research below and pricing/lead time above. We also produce Europium as rod, pellets, powder, pieces, granules, ingot, wire, and in compound forms, such as oxide. Other shapes are available by request.
Europium is a Block F, Group 3, Period 6 element. The number of electrons in each of Europium's shells is 2, 8, 18, 25, 8, 2 and its electronic configuration is [Xe]4f7 6s2. In its elemental form europium's CAS number is 7440-53-1. The europium atom has a radius of 199.5.pm and it's Van der Waals radius is unknown. Europium is moderately toxic. Europium is utilized primarily for its unique luminescent behavior. Europium is available as metal and compounds with purities from 99% to 99.999% (ACS grade to ultra-high purity); metals in the form of foil, sputtering target, and rod, and compounds as submicron and nanopowder. Excitation of the Europium atom by absorption of ultra violet radiation can result in specific energy level transitions within the atom creating an emission of visible radiation.In energy efficient fluorescent lighting, Europium provides not only the necessary red, but also the blue. Several commercial blue phosphors are based on Europium. Europium was named after the continent of Europe. See Europium research below.
PACKAGING SPECIFICATIONS FOR BULK & RESEARCH QUANTITIES
Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Shipping documentation includes a Certificate of Analysis and Material Safety Data Sheet (MSDS). Bullion and bar forms are best if purchasing solely for physical possession and risk exposure.
Sensitization of Lanthanoid Luminescence by Organic and Inorganic Ligands in Lanthanoid-Organic-Polyoxometalates.
Ritchie C, Baslon V, Moore EG, Reber C, Boskovic C.
Inorg Chem. 2011 Dec 23. [Epub ahead of print]
PMID:
22220495
[PubMed - as supplied by publisher]
Di-?-benzoato-?O,O':O';?O:O,O'-bis[aqua-bis-(benzoato-?O,O')(dimethylformamide-?O)europium(III)].
Wang Z, Zhou X.
Acta Crystallogr Sect E Struct Rep Online. 2011 Nov 1;67(Pt 11):m1579-80. Epub 2011 Oct 22.
PMID:
22219814
[PubMed - in process]
Silver Nanoparticle-Enhanced Chemiluminescence Method for Determining Naproxen Based on Europium(III)-Sensitized Ce(IV)-Na(2)S (2)O (4) Reaction.
Kamruzzaman M, Alam AM, Kim KM, Lee SH, Kim YH, Kim SH.
J Fluoresc. 2012 Jan 4. [Epub ahead of print]
PMID:
22215565
[PubMed - as supplied by publisher]
Effects of crystallization and dopant concentration on the emission behavior of TiO2:Eu nanophosphors.
Pal M, Pal U, Gracia Y Jimenez JM, Perez-Rodriguez F.
Nanoscale Res Lett. 2012 Jan 3;7(1):1. [Epub ahead of print]
PMID:
22214494
[PubMed - as supplied by publisher]
Influence of Catalyses on the Preparation of YVO(4):Eu (3+) Phosphors by the Sol-gel Methodology.
Saltarelli M, Luz PP, Matos MG, de Faria EH, Ciuffi KJ, Calefi PS, Rocha LA, Nassar EJ.
J Fluoresc. 2011 Dec 30. [Epub ahead of print]
PMID:
22205247
[PubMed - as supplied by publisher]
Selected Trace Elements in the Sacramento River, California: Occurrence and Distribution.
Taylor HE, Antweiler RC, Roth DA, Alpers CN, Dileanis P.
Arch Environ Contam Toxicol. 2011 Dec 23. [Epub ahead of print]
PMID:
22193863
[PubMed - as supplied by publisher]
A Sensitive, Homogeneous, and High-Throughput Assay for Lysine-Specific Histone Demethylases at the H3K4 Site.
Wang C, Caron M, Burdick D, Kang Z, Auld D, Hill WA, Padrós J, Zhang JH.
Assay Drug Dev Technol. 2011 Dec 22. [Epub ahead of print]
PMID:
22192306
[PubMed - as supplied by publisher]
Modelling and optimisation of preparative chromatographic purification of europium.
Ojala F, Max-Hansen M, Kifle D, Borg N, Nilsson B.
J Chromatogr A. 2012 Jan 13;1220:21-5. Epub 2011 Nov 23.
PMID:
22189296
[PubMed - in process]
Site-specific DOTA/europium-labeling of recombinant human relaxin-3 for receptor-ligand interaction studies.
Zhang WJ, Luo X, Liu YL, Shao XX, Wade JD, Bathgate RA, Guo ZY.
Amino Acids. 2011 Dec 21. [Epub ahead of print]
PMID:
22187146
[PubMed - as supplied by publisher]
Building large supramolecular nanocapsules with europium cations.
Hamacek J, Poggiali D, Zebret S, Aroussi BE, Schneider MW, Mastalerz M.
Chem Commun (Camb). 2011 Dec 19. [Epub ahead of print]
PMID:
22179299
[PubMed - as supplied by publisher]
Circularly Polarized Lanthanide Luminescence from Langmuir-Blodgett Films Formed from Optically Active and Amphiphilic Eu(III) -Based Self-Assembly Complexes.
Kitchen JA, Barry DE, Mercs L, Albrecht M, Peacock RD, Gunnlaugsson T.
Angew Chem Int Ed Engl. 2011 Dec 7. doi: 10.1002/anie.201106863. [Epub ahead of print]
PMID:
22162422
[PubMed - as supplied by publisher]
Enhancement of the Luminescence Efficiency of Europium(III) Tris(?-diketonato) Complex in Organic Media by Quaternary Ammonium Salts with Anionic Ligands.
Katano H, Uematsu K, Tsukatani T.
Anal Sci. 2011;27(12):1249.
PMID:
22156255
[PubMed - in process]
High-pressure phase transition and thermoelastic properties of europium chalcogenides.
Gupta DC, Singh KC.
J Mol Model. 2011 Nov 26. [Epub ahead of print]
PMID:
22146983
[PubMed - as supplied by publisher]
Spectrofluorimetric study of the interaction between europium(III) and moxifloxacin in micellar solution and its analytical application.
Kamruzzaman M, Alam AM, Lee SH, Ragupathy D, Kim YH, Park SR, Kim SH.
Spectrochim Acta A Mol Biomol Spectrosc. 2012 Feb;86:375-80. Epub 2011 Oct 29.
PMID:
22133700
[PubMed - in process]
Complexation of Europium(III) by Bis(dialkyltriazinyl)bipyridines in 1-Octanol.
Steppert M, Císarová I, Fanghänel T, Geist A, Lindqvist-Reis P, Panak P, Stepnicka P, Trumm S, Walther C.
Inorg Chem. 2012 Jan 2;51(1):591-600. Epub 2011 Dec 1.
PMID:
22133151
[PubMed - in process]
Photoluminescent Properties of Novel Rare Earth Organic-Inorganic Nanocomposite with TiO(2) Modified Silica via Double Crosslinking Units.
Zhao Y, Yan B.
Photochem Photobiol. 2012 Jan;88(1):21-31. doi: 10.1111/j.1751-1097.2011.01033.x. Epub 2011 Nov 29.
PMID:
22126262
[PubMed - in process]
Nonradiative deactivation of europium(iii) luminescence as a detection scheme for moisture.
Knall AC, Tscherner M, Noormofidi N, Pein A, Saf R, Mereiter K, Ribitsch V, Stelzer F, Slugovc C.
Analyst. 2011 Nov 28. [Epub ahead of print]
PMID:
22125794
[PubMed - as supplied by publisher]
Probing the metal ion selectivity in methionine aminopeptidase via changes in the luminescence properties of the enzyme bound europium ion.
Sule N, Singh RK, Zhao P, Srivastava DK.
J Inorg Biochem. 2012 Jan;106(1):84-9. Epub 2011 Sep 22.
PMID:
22112844
[PubMed - in process]
Characteristics of functionalized nano-hydroxyapatite and internalization by human epithelial cell.
Yan-Zhong Z, Yan-Yan H, Jun Z, Shai-Hong Z, Zhi-You L, Ke-Chao Z.
Nanoscale Res Lett. 2011 Nov 23;6:600.
PMID:
22108000
[PubMed - in process]
The oxidation state of europium in halide glasses.
Weber JK, Vu M, Passlick C, Schweizer S, Brown DE, Johnson CE, Johnson JA.
J Phys Condens Matter. 2011 Dec 14;23(49):495402. Epub 2011 Nov 18.
PMID:
22101252
[PubMed - in process]
Material Safety Data Sheet
1 Identification of substance
Product details
Trade name Europium metal
2 Composition/Data on components:
Chemical characterization: Designation: (CAS#)
Europium (CAS# 7440-53-1), 100%
Identification number(s):
EINECS Number: 231-161-7
Additonal information: Packaged under mineral oil (CAS# 8012-95-1)
3 Hazards identification
Hazard designation: F Highly flammable
Information pertaining to particular dangers for man and environment
R 11 Highly flammable.
R 15 Contact with water liberates extremely flammable gases.
4 First aid measures
After inhalation
Supply fresh air. If required, provide artificial respiration. Keep patient warm. Consult doctor if symptoms persist.
Seek immediate medical advice.
After skin contact
Instantly wash with water and soap and rinse thoroughly.
Seek immediate medical advice.
After eye contact
Rinse opened eye for several minutes under running water. Then consult doctor.
After swallowing Seek immediate medical advice.
5 Fire fighting measures
Suitable extinguishing agents Extinguishing powder. Do not use water.
For safety reasons unsuitable extinguishing agents
Water.
Halocarbon extinguisher
Special hazards caused by the material, its products of combustion or flue gases:
Contact with water releases hydrogen (explosive).
Protective equipment:
Wear self-contained breathing apparatus.
Wear full protective suit.
Measures for environmental protection:
Do not allow material to be released to the environment without proper governmental permits.
Measures for cleaning/collecting:
Ensure adequate ventilation.
Do not flush with water or aqueous cleansing agents
Keep away from ignition sources.
Additional information:
See Section 7 for information on safe handling
See section 8 for information on personal protection equipment.
See Section 13 for information on disposal.
7 Handling and storage
Handling
Information for safe handling:
Keep containers tightly sealed.
Store in cool, dry place in tightly closed containers.
Ensure good ventilation/exhaustion at the workplace.
Open and handle container with care.
Information about protection against explosions and fires:
Keep ignition sources away - Do not smoke.
Protect against electrostatic charges.
Fumes can combine with air to form an explosive mixture.
Storage
Requirements to be met by storerooms and containers:
Store in cool location.
Information about storage in one common storage facility:
Store away from water.
Do not store together with oxidizing and acidic materials.
Store away from halogens.
Further information about storage conditions:
Store in petroleum or under dry argon.
Protect from humidity and keep away from water.
Keep container tightly sealed.
Store in cool, dry conditions in well sealed containers.
8 Exposure controls and personal protection
Additional information about design of technical systems:
Properly operating chemical fume hood designed for hazardous chemicals and having an average face velocity of at least 100 feet per minute.
Components with critical values that require monitoring at the workplace:
Not required.
Additional information: No data
Personal protective equipment
General protective and hygienic measures
The usual precautionary measures should be adhered to in handling the chemicals.
Keep away from foodstuffs, beverages and food.
Instantly remove any soiled and impregnated garments.
Wash hands during breaks and at the end of the work.
Breathing equipment: Use breathing protection with high concentrations.
Protection of hands: Impervious gloves
Eye protection:
Safety glasses
Full face protection
Face protection
Body protection: Protective work clothing.
9 Physical and chemical properties:
General Information
Form: Solid.
Colour: Silver-coloured
Smell: Odourless
Value/Range Unit Method
Change in condition
Melting point/Melting range: 822 ° C
Boiling point/Boiling range: 1439 ° C
Sublimation temperature / start: Not determined
Flash point: Not applicable
Inflammability (solid, gaseous) Highly flammable.
Contact with water liberates extremely flammable gases.
Ignition temperature: Not determined
Decomposition temperature: Not determined
Critical values for explosion:
Lower: Not determined
Upper: Not determined
Steam pressure: Not determined
Density at 20 ° C 5.26 g/cm³
Solubility in / Miscibility with
Water: Not determined
10 Stability and reactivity
Thermal decomposition / conditions to be avoided:
No decomposition if used and stored according to specifications.
Materials to be avoided:
Oxidizing agents
Water/moisture
Acids
Halogens
Air
Dangerous reactions: Contact with water releases flammable gases
Dangerous products of decomposition: Hydrogen
11 Toxicological information
Acute toxicity:
Primary irritant effect:
on the skin: Irritant for skin and mucous membranes.
on the eye: Irritant effect.
Sensitization: No sensitizing effect known.
Additional toxicological information:
To the best of our knowledge the acute and chronic toxicity of this substance is not fully known.
12 Ecological information:
General notes:
Do not allow material to be released to the environment without proper governmental permits.
Water hazard class 1 (Self-assessment): slightly hazardous for water.
Do not allow undiluted product or large quantities of it to reach ground water, water bodies or sewage system.
13 Disposal considerations
Product:
Recommendation
Consult state, local or national regulations for proper disposal.
Hand over to disposers of hazardous waste.
Must be specially treated under adherence to official regulations.
Uncleaned packagings:
Recommendation:
Disposal must be made according to official regulations.
14 Transport information
Land transport ADR/RID and GGVS/GGVE (cross-border/domestic)
ADR/RID-GGVS/E Class: 4.1 (F3) Flammable solids.
Kemler Number: 40
UN-Number: 3178
Packaging group: II
Label 4.1
Designation of goods: 3178 FLAMMABLE SOLID, INORGANIC, N.O.S.
(europium)
Code letter and hazard designation of product: F Highly flammable
Risk phrases:
11 Highly flammable.
15 Contact with water liberates extremely flammable gases.
National regulations
Information about limitation of use:
For use only by technically qualified individuals.
Employment restrictions concerning young persons must be observed.
Water hazard class:
Water hazard class 1 (Self-assessment): slightly hazardous for water.
16 Other information:
Employers should use this information only as a supplement to other information gathered by them, and should make independent judgement of suitability of this information to ensure proper use and protect the health and safety of employees. This information is furnished without warranty, and any use of the product not in conformance with this Material Safety Data Sheet, or in combination with any other product or process, is the responsibility of the user.
and smallest possible average grain sizes for use in semiconductor, chemical vapor deposition (CVD) and physical vapor deposition (PVD) display and optical applications. Our standard disc sizes range from 1" to 8" in diameter and from 2mm to 1/2" thick. We can also provide Discs outside this range. Materials are produced using crystallization, solid state and other ultra high purification processes such as sublimation. American Elements specializes in producing custom compositions for commercial and research applications and for new proprietary technologies. American Elements also casts any of the rare earth metals and most other advanced materials into rod, bar or plate form, as well as other machined shapes and through other processes such as nanoparticles (See also application discussion at Nanotechnology Information and at Quantum Dots) and in the form of solutions and organometallics.American Elements produces to many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia)and follows applicable ASTM testing standards.Typical and custom packaging is available. See safety data and research below and pricing/lead time above. We also produce Europium as rod, pellets, powder, pieces, granules, ingot, wire, and in compound forms, such as oxide. Other shapes are available by request. 
Europium is a Block F, Group 3, Period 6 element. The number of electrons in each of Europium's shells is 2, 8, 18, 25, 8, 2 and its electronic configuration is [Xe]4f7 6s2. In its elemental form europium's CAS number is 7440-53-1. The europium atom has a radius of 199.5.pm and it's Van der Waals radius is unknown. Europium is moderately toxic. Europium is utilized primarily for its unique luminescent behavior. Europium is available as metal and
compounds with purities from 99% to 99.999% (ACS grade to ultra-high purity); metals in the form of foil, sputtering target, and rod, and compounds as submicron and nanopowder. Excitation of the Europium atom by absorption of ultra violet radiation can result in specific energy level transitions within the atom creating an emission of visible radiation.In energy efficient fluorescent lighting, Europium provides not only the necessary red, but also the blue. Several commercial blue phosphors are based on Europium. Europium was named after the continent of Europe. See Europium research below.
