American Elements: Iron Foil Supplier & Tech Info

See research below. American Elements specializes in producing Iron as rolled foils and sheets in various thicknesses and sizes. Most foils are produced from cast ingots for use in coating and thin film Chemical Vapor Deposition (CVD) and Physical Vapor Deposition (PVD) processes including Ultra High Purity (99.9+%) thin film foil

Ultra High Purity (99.9+%) thin film foil

Thermal and Electron Beam (E-Beam) Evaporation, Low Temperature Organic Evaporation, Atomic Layer Deposition (ALD), Organometallic and Chemical Vapor Deposition (MOCVD) for specific applications such as fuel cells and solar energy. Thickness can range from 0.003" to approximately 2mm for all metals. Some metals can also be rolled down as thin as 0.001". Piece sizes are available up to approximately 7" maximum width. Maximum lengths of about 20" can be obtained with a nominal thickness between about 0.005" and 0.020" for thin film deposition on glass or metal substrates. Materials are produced using crystallization, solid state and other ultra high purification processes such as sublimation. American Elements specializes in producing custom compositions for commercial and research applications and for new proprietary technologies. American Elements also casts any of the rare earth metals and most other advanced materials into rod, bar or plate form, as well as other machined shapes and through other processes such as nanoparticles (See also application discussion at Nanotechnology Information and at Quantum Dots) and in the form of solutions and organometallics. We also produce Iron as rods, powder and plates. Other shapes are available by request.

Iron is a Block D, Group 8, Period 4 element. The electronic configuration is [Ar] 3d⁶ 4s². In its elemental form iron's CAS number is 7439-89-6. The iron atom has a radius of 124.1.pm and it's Van der Waals radius is 200.pm. Iron is the most commonly used metal for commercial applications due to its hardness, historical availability and low cost. Once used on its own, it is now alloyed with nickel and other elements to produce steel and other high strength, non-corrosive structural metals. Iron as a metal and as its many compounds has numerous uses. It is a primary colorant in glass and ceramics. It is a catalyst. It is the basis for low grade magnets and because of its magnetic properties is used extensively in memory tape. Recent applications for Iron nanoparticles include in water treatment of carbon tetrachloride in contaminated groundwater, magnetic data storage and resonance imaging (MRI) and in certain alloy and catalyst applications. Iron can also be introduced into processes using iron foil, pellets, rod and wire by thin film Chemical Vapor Deposition (CVD) and Physical Vapor Deposition (PVD) processes including Thermal and Electron Beam (E-Beam) Evaporation, Low Temperature Organic Evaporation, Atomic Layer Deposition (ALD), Organometallic and Chemical Vapor Deposition (MOCVD) for specific applications such as fuel cells and solar energy. Iron is available as metal and compounds with purities from 99% to 99.999% (ACS grade to ultra-high purity); metals in the form of foil, sputtering target, and rod, and compounds as submicron and nanopowder. Iron was first discovered by Early Man.