Indium Oxide Nanopowder or Nanoparticles (InO), nanodots or nanocrystals are white high surface area particles. Nanoscale Indium Oxide Nanoparticles are typically 5 - 100 nanometers (nm) with specific surface area (SSA) in the 25 - 50 m 2 /g range. Nano Indium Oxide Particles are also available in Ultra high purity and high purity and coated and dispersed forms. They are also available as a nanofluid through the AE Nanofluid production group. Nanofluids are generally defined as suspended nanoparticles in solution either using surfactant or surface charge technology. Nanofluid dispersion and coating selection technical guidance is also available. Other nanostructures include nanorods, nanowhiskers, nanohorns, nanopyramids and other nanocomposites. Surface functionalized nanoparticles allow for the particles to be preferentially adsorbed at the surface interface using chemically bound polymers. Development research is underway in Nano Electronics and Photonics materials, such as MEMS and NEMS, Bio Nano Materials, such as Biomarkers, Bio Diagnostics & Bio Sensors, and Related Nano Materials, for use in Polymers, Textiles, Fuel Cell Layers, Composites and Solar Energy materials. Nanopowders are analyzed for chemical composition by ICP, particle size distribution (PSD) by laser diffraction, and for Specific Surface Area (SSA) by BET multi-point correlation techniques. Novel nanotechnology applications also include Quantum Dots. High surface areas can also be achieved using solutions and using thin film by sputtering targets and evaporation technology using pellets, rod and foil.. Applications for Indium oxide nanocrystals include in to make transparent conductive coatings, as a substitute for Mercury as a battery inhibitor, and in electrically conductive thin films . Indium Oxide Nano Particles are generally immediately available in most volumes. Additional technical, research and safety (MSDS) information is available.
Indium is a Block P, Group 13, Period 5 element. The number of electrons in each of Indium's shells is 2, 8, 18, 18, 3 and its electronic configuration is [Kr] 4d10 5s2 5p1. In its elemental form indium's CAS number is 7440-74-6. The indium atom has a radius of 162.6.pm and it's Van der Waals radius is 193.pm. Indium is only slightly toxic. Indium has found application in semi-conductor materials and other electronic applications. It is used to make low-melting alloys, such as an alloy of 24% indium - 76% Indium is liquid at room temperature. It is used in making bearing alloys, germanium transistors, rectifiers, and photoconductors. It can be plated onto metal and evaporated onto glass, forming a mirror as good as that made with silver but with more resistance to atmospheric corrosion. Indium is available as metal and compounds with purities from 99% to 99.9999% (ACS grade to ultra-high purity); metals in the form of foil, sputtering target, and rod, and compounds as submicron and nanopowder. Indium is also used in various metal alloys (See AE Alloys). Indium was first discovered by Ferdinand Reich in 1863. See Indium research below.
PACKAGING SPECIFICATIONS FOR BULK & RESEARCH QUANTITIES
Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Shipping documentation includes a Certificate of Analysis and Material Safety Data Sheet (MSDS). Solutions are packaged in polypropylene, plastic or glass jars up to palletized 440 gallon liquid totes.
Diastereoselective indium-mediated allylation of N-tert-butanesulfinyl ketimines: easy access to asymmetric quaternary stereocenters bearing nitrogen atoms.
Sirvent JA, Foubelo F, Yus M.
Chem Commun (Camb). 2012 Jan 26. [Epub ahead of print]
PMID:
22281839
[PubMed - as supplied by publisher]
Focusing on Energy and Optoelectronic Applications: A Journey for Graphene and Graphene Oxide at Large Scale.
Wan X, Huang Y, Chen Y.
Acc Chem Res. 2012 Jan 26. [Epub ahead of print]
PMID:
22280410
[PubMed - as supplied by publisher]
A Wheel-Shaped Indium-Telluride Nanocluster [In(18)Te(30)(dach)(6)](6-): Its Formation and Structure.
Wang YH, Luo W, Jiang JB, Bian GQ, Zhu QY, Dai J.
Inorg Chem. 2012 Jan 26. [Epub ahead of print]
PMID:
22279965
[PubMed - as supplied by publisher]
Distribution of Cell-Free and Cell-Associated HIV Surrogates in the Female Genital Tract After Simulated Vaginal Intercourse.
Louissaint NA, Fuchs EJ, Bakshi RP, Nimmagadda S, Du Y, Macura KJ, King KE, Wahl R, Goldsmith AJ, Caffo B, Cao YJ, Anderson J, Hendrix CW.
J Infect Dis. 2012 Jan 25. [Epub ahead of print]
PMID:
22279121
[PubMed - as supplied by publisher]
Visible to near-infrared light harvesting in Ag(2)S nanoparticles/ZnO nanowire array photoanodes.
Wu JJ, Chang RC, Chen DW, Wu CT.
Nanoscale. 2012 Jan 26. [Epub ahead of print]
PMID:
22278401
[PubMed - as supplied by publisher]
Enhancement of light extraction in GaN-based light-emitting diodes using rough beveled ZnO nanocone arrays.
Yin Z, Liu X, Wu Y, Hao X, Xu X.
Opt Express. 2012 Jan 16;20(2):1013-21. doi: 10.1364/OE.20.001013.
PMID:
22274448
[PubMed - in process]
MgO nano-facet embedded silver-based dielectric/metal/dielectric transparent electrode.
Kim S, Yu HK, Hong K, Kim K, Son JH, Lee I, Kim KB, Kim TY, Lee JL.
Opt Express. 2012 Jan 16;20(2):845-53. doi: 10.1364/OE.20.000845.
PMID:
22274430
[PubMed - in process]
Carrier dynamics in InN nanorod arrays.
Ahn H, Yu CC, Yu P, Tang J, Hong YL, Gwo S.
Opt Express. 2012 Jan 16;20(2):769-75. doi: 10.1364/OE.20.000769.
PMID:
22274422
[PubMed - in process]
Coherent and directional emission at 1.55 µm from PbSe colloidal quantum dot electroluminescent device on silicon.
Heo J, Jiang Z, Xu J, Bhattacharya P.
Opt Express. 2011 Dec 19;19(27):26394-8. doi: 10.1364/OE.19.026394.
PMID:
22274223
[PubMed - in process]
Transformation of Indium Nanoparticles to ß-Indium Sulfide: Digestive Ripening and Visible Light-Induced Photocatalytic Properties.
Cingarapu S, Ikenbbery MA, Hamal DB, Sorensen CM, Hohn K, Klabunde KJ.
Langmuir. 2012 Jan 24. [Epub ahead of print]
PMID:
22272650
[PubMed - as supplied by publisher]
Tailoring 3D-Single-Walled Carbon Nanotubes Anchored to Indium Tin Oxide for Natural Cellular Uptake and Intracellular Sensing.
Mendes PM, Rawson F, Jackson S, Yeung C.
Nano Lett. 2012 Jan 23. [Epub ahead of print]
PMID:
22268573
[PubMed - as supplied by publisher]
Vaginal distribution and retention of a multiparticulate drug delivery system, assessed by gamma scintigraphy and magnetic resonance imaging.
Mehta S, Verstraelen H, Peremans K, Villeirs G, Vermeire S, De Vos F, Mehuys E, Remon JP, Vervaet C.
Int J Pharm. 2012 Jan 13. [Epub ahead of print]
PMID:
22265911
[PubMed - as supplied by publisher]
Synthesis and characterization of InNbO(4) nanopowder for gas sensors.
Balamurugan C, Vijayakumar E, Subramania A.
Talanta. 2012 Jan 15;88:115-20. Epub 2011 Nov 26.
PMID:
22265476
[PubMed - in process]
Interfacial effects on the optical behavior of Ge:ITO and Ge:ZnO nanocomposite films.
Shih GH, Allen CG, Potter BG Jr.
Nanotechnology. 2012 Feb 24;23(7):075203. Epub 2012 Jan 20.
PMID:
22261039
[PubMed - in process]
Synthesis of Indium Borate and Its Application in Photodegradation of 4-Chlorophenol.
Yuan J, Wu Q, Zhang P, Yao J, He T, Cao Y.
Environ Sci Technol. 2012 Jan 19. [Epub ahead of print]
PMID:
22260653
[PubMed - as supplied by publisher]
Electrochromic Properties of a Metallo-Supramolecular Polymer Derived from Tetra(2-pyridyl-1,4-pyrazine) Ligands Integrated in Thin Multilayer Films.
da Silva CA, Vidotti M, Fiorito PA, Cordoba De Torresi SI, Torresi RM, Alves WA.
Langmuir. 2012 Jan 19. [Epub ahead of print]
PMID:
22260213
[PubMed - as supplied by publisher]
Bis-(µ-pyridine-2,3-dicarboxyl-ato)bis-[aqua-(3-carb-oxy-pyridine-2-carboxyl-ato)indium(III)] tetra-hydrate.
Eshtiagh-Hosseini H, Mirzaei M, Mousavinezhad A, Necas M, Mague JT.
Acta Crystallogr Sect E Struct Rep Online. 2012 Jan 1;68(Pt 1):m71-2. Epub 2011 Dec 21.
PMID:
22259367
[PubMed - in process]
Indium Tin Oxide devices for amperometric detection of vesicular release by single cells.
Meunier A, Fulcrand R, Darchen F, Guille Collignon M, Lemaître F, Amatore C.
Biophys Chem. 2011 Dec 24. [Epub ahead of print]
PMID:
22257976
[PubMed - as supplied by publisher]
A transparent µECoG array for simultaneous recording and optogenetic stimulation.
Ledochowitsch P, Olivero E, Blanche T, Maharbiz MM.
Conf Proc IEEE Eng Med Biol Soc. 2011 Aug;2011:2937-40.
PMID:
22254956
[PubMed - in process]
Flexible PET/ITO electrode array for implantable biomedical applications.
Ahani A, Saadati-Fard L, Sodagar AM, Boroumad FA.
Conf Proc IEEE Eng Med Biol Soc. 2011 Aug;2011:2878-81.
PMID:
22254942
[PubMed - in process]
Indium Oxide Nanopowder or Nanoparticles (InO), nanodots or nanocrystals are white high surface area particles. Nanoscale Indium Oxide Nanoparticles are typically 5 - 100 nanometers (nm) with specific surface area (SSA) in the 25 - 50 m 2 /g range. Nano Indium Oxide Particles are also available in Ultra high purity and high purity and coated and dispersed forms. They are also available as a nanofluid through the AE Nanofluid production group. Nanofluids are generally defined as suspended nanoparticles in solution either using surfactant or surface charge technology. Nanofluid dispersion and coating selection technical guidance is also available. Other nanostructures include nanorods, nanowhiskers, nanohorns, nanopyramids and other nanocomposites. Surface functionalized nanoparticles allow for the particles to be preferentially adsorbed at the surface interface using chemically bound polymers. Development research is underway in Nano Electronics and Photonics materials, such as MEMS and NEMS, Bio Nano Materials, such as Biomarkers, Bio Diagnostics & Bio Sensors, and Related Nano Materials, for use in Polymers, Textiles, Fuel Cell Layers, Composites and Solar Energy materials. Nanopowders are analyzed for chemical composition by ICP, particle size distribution (PSD) by laser diffraction, and for Specific Surface Area (SSA) by BET multi-point correlation techniques. Novel nanotechnology applications also include Quantum Dots. High surface areas can also be achieved using solutions and using thin film by sputtering targets and evaporation technology using pellets, rod and foil.. Applications for Indium oxide nanocrystals include in to make transparent conductive coatings, as a substitute for Mercury as a battery inhibitor, and in electrically conductive thin films . Indium Oxide Nano Particles are generally immediately available in most volumes. Additional technical, research and safety (MSDS) information is available.
Indium is a Block P, Group 13, Period 5 element. The number of electrons in each of Indium's shells is 2, 8, 18, 18, 3 and its electronic configuration is [Kr] 4d10 5s2 5p1. In its elemental form indium's CAS number is 7440-74-6. The indium atom has a radius of 162.6.pm and it's Van der Waals radius is 193.pm. Indium is only slightly toxic. Indium has found application in semi-conductor materials and other electronic applications. It is used to make low-melting alloys, such as an alloy of 24% indium - 76% Indium is liquid at room temperature. It is used in making bearing alloys, germanium transistors, rectifiers, and photoconductors. It can be plated onto metal and evaporated onto glass, forming a mirror as good as that made with silver but with more resistance to atmospheric corrosion. Indium is available as metal and compounds with purities from 99% to 99.9999% (ACS grade to ultra-high purity); metals in the form of foil, sputtering target, and rod, and compounds as submicron and nanopowder. Indium is also used in various metal alloys (See AE Alloys). Indium was first discovered by Ferdinand Reich in 1863. See Indium research below.
