American Elements specializes in producing high purity Lanthanated Molybdenum Shot with the highest possible density and smallest possible average grain sizes for use in semiconductor,
Chemical Vapor Deposition (CVD) and Physical Vapor Deposition (PVD) processes including Thermal and Electron Beam (E-Beam) Evaporation, Low Temperature Organic Evaporation, Atomic Layer Deposition (ALD), Metallic-Organic and Chemical Vapor Deposition (MOCVD). Our standard Shot sizes range from 1-3mm . We can also provide Shot outside this range for ultra high purity thin film applications, such as fuel cells and solar energy layers. Lanthanated molybdenum doped products typically display better ductility characteristics after recrystallization than pure molybdenum or HCT moly and have a higher recrystallization temperature. Materials are produced using crystallization , solid state and other ultra high purification processes such as sublimation. American Elements specializes in producing custom compositions for commercial and research applications and for new proprietary technologies. American Elements also casts any of the rare earth metals and most other advanced materials into rod, bar or plate form , as well as other machined shapes and through other processes such as nanoparticles (See also application discussion at Nanotechnology Information and at Quantum Dots ) and in the form of solutions and organometallics. See research below. We also produce LanthanatedMolybdenum as rod , ingot, powder, pieces, disc, granules, wire, and in compound forms, such as oxide. Other shapes are available by request.
Molybdenum is a Block D, Group 6, Period 5 element. The number of electrons in each of Molybdenum's shells is 2, 8, 18, 13, 1 and its electronic configuration is [Kr] 4d5 5s1. In its elemental form molybdenum's CAS number is 7439-98-7. The molybdenum atom has a radius of 136.3.pm and it's Van der Waals radius is 200.pm. Molybdenum is toxic unless it is in small quantities. Molybdenum has the third highest melting point of any element, exceeded only by tungsten and tantalum. Molybdenum is a catalyst in the oil refining. It has many other applications, including in catalysts, pigments, corrosion inhibitors and lubricants. It has a very high elastic modulus. Molybdenum is available as metal and compounds with purities from 99% to 99.999% (ACS grade to ultra-high purity); metals in the form of foil, sputtering target, and rod, and compounds as submicron and nanopowder. It is used in steel alloys to add hardness and raise melting points. It is a component in Hastelloys brand steel. Molybdenum is used in nuclear reactors and aerospace components. Molybdenum was first discovered by Carl Wilhelm in 1778. The origin of the name Molybdenum comes from the Greek word molubdos meaning lead. See Molybdenum research below.
Lanthanum is a Block F, Group 3, Period 6 element. The number of electrons in each of Lanthanum's shells is 2, 8, 18, 18, 9, 2 and its electronic configuration is [Xe] 5d1 6s2. In its elemental form lanthanum 's CAS number is 7439-91-0. The lanthanum atom has a radius of 187.pm and it's Van der Waals radius is 200.pm. Lanthanum and compounds of Lanthanum are somewhat toxic. Lanthanum is one of the products manufactured and distributed under the tradename AE Rare Earths. Lanthanum is the first element in the rare earth or lanthanide series. It is the model for all the other trivalent rare earths. After cerium, it is the second most abundant of the rare earths. Lanthanum is available as metal and compounds with purities from 99% to 99.999% (ACS grade to ultra high purity); metals in the form of foil, sputtering target, and rod, and compounds as submicron and nanopowder.Lanthanum-rich lanthanide compositions have been used extensively for cracking reactions in FCC catalysts, especially to manufacture low-octane fuel for heavy crude oil. The name Lanthanum originates from the Greek word Lanthaneia which means 'To lie hidden'. See Lanthanum research below.
PACKAGING SPECIFICATIONS FOR BULK & RESEARCH QUANTITIES
Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Shipping documentation includes a Certificate of Analysis and Material Safety Data Sheet (MSDS). Solutions are packaged in polypropylene, plastic or glass jars up to palletized 440 gallon liquid totes.
Process development for the separation and recovery of Mo and Co from chloride leach liquors of petroleum refining catalyst by solvent extraction.
Banda R, Sohn SH, Lee MS.
J Hazard Mater. 2012 Jan 9. [Epub ahead of print]
PMID:
22336581
[PubMed - as supplied by publisher]
Selective cleavage of pepsin by molybdenum metallopeptidase.
Yenjai S, Malaikaew P, Liwporncharoenvong T, Buranaprapuk A.
Biochem Biophys Res Commun. 2012 Feb 5. [Epub ahead of print]
PMID:
22330807
[PubMed - as supplied by publisher]
Iminopyridine Complexes of Manganese, Rhenium, and Molybdenum Derived from Amino Ester Methylserine and Peptides Gly-Gly, Gly-Val, and Gly-Gly-Gly: Self-Assembly of the Peptide Chains.
Alvarez CM, García-Rodríguez R, Miguel D.
Inorg Chem. 2012 Feb 13. [Epub ahead of print]
PMID:
22329711
[PubMed - as supplied by publisher]
Low-Temperature, Solution-Processed MoO(x) for Efficient and Stable Organic Solar Cells.
Zilberberg K, Gharbi H, Behrendt A, Trost S, Riedl T.
ACS Appl Mater Interfaces. 2012 Feb 15. [Epub ahead of print]
PMID:
22324481
[PubMed - as supplied by publisher]
A molecular MoS? edge site mimic for catalytic hydrogen generation.
Karunadasa HI, Montalvo E, Sun Y, Majda M, Long JR, Chang CJ.
Science. 2012 Feb 10;335(6069):698-702.
PMID:
22323816
[PubMed - in process]
The use of total reflectance X-ray fluorescence (TXRF) for the determination of metals in the pharmaceutical industry.
Antosz FJ, Xiang Y, Diaz AR, Jensen AJ.
J Pharm Biomed Anal. 2012 Jan 16. [Epub ahead of print]
PMID:
22316622
[PubMed - as supplied by publisher]
Kinetic Resolution of Planar-Chiral (?(6) -Arene)Chromium Complexes by Molybdenum-Catalyzed Asymmetric Ring-Closing Metathesis.
Ogasawara M, Wu WY, Arae S, Watanabe S, Morita T, Takahashi T, Kamikawa K.
Angew Chem Int Ed Engl. 2012 Feb 3. doi: 10.1002/anie.201108292. [Epub ahead of print]
PMID:
22308166
[PubMed - as supplied by publisher]
Measurement of mass attenuation coefficients of Rhizophora spp. binderless particleboards in the 16.59-25.26keV photon energy range and their density profile using x-ray computed tomography.
Marashdeh MW, Bauk S, Tajuddin AA, Hashim R.
Appl Radiat Isot. 2012 Jan 20. [Epub ahead of print]
PMID:
22304963
[PubMed - as supplied by publisher]
Nitrite and Nitrite Reductases: From Molecular Mechanisms to Significance in Human Health and Disease.
Castiglione N, Rinaldo S, Giardina G, Stelitano V, Cutruzzolà F.
Antioxid Redox Signal. 2012 Feb 5. [Epub ahead of print]
PMID:
22304560
[PubMed - as supplied by publisher]
Molybdenum(vi) catalysts obtained from ?(3)-allyl dicarbonyl precursors: Synthesis, characterization and catalytic performance in cyclooctene epoxidation.
Gamelas CA, Gomes AC, Bruno SM, Almeida Paz FA, Valente AA, Pillinger M, Romão CC, Gonçalves IS.
Dalton Trans. 2012 Feb 2. [Epub ahead of print]
PMID:
22302175
[PubMed - as supplied by publisher]
Field-Effect Tunneling Transistor Based on Vertical Graphene Heterostructures.
Britnell L, Gorbachev RV, Jalil R, Belle BD, Schedin F, Mishchenko A, Georgiou T, Katsnelson MI, Eaves L, Morozov SV, Peres NM, Leist J, Geim AK, Novoselov KS, Ponomarenko LA.
Science. 2012 Feb 2. [Epub ahead of print]
PMID:
22300848
[PubMed - as supplied by publisher]
Spectroscopic reflectometry of mirror surfaces during plasma exposure.
Wisse M, Eren B, Marot L, Steiner R, Meyer E.
Rev Sci Instrum. 2012 Jan;83(1):013509.
PMID:
22299953
[PubMed - in process]
[Absorption characteristics of molybdenum by reed and cattail].
Lian JJ, Xu SG, Han CW.
Huan Jing Ke Xue. 2011 Nov;32(11):3335-40. Chinese.
PMID:
22295632
[PubMed - in process]
Conserved Signal Peptide Recognition Systems across the Prokaryotic Domains.
Coulthurst SJ, Dawson A, Hunter WN, Sargent F.
Biochemistry. 2012 Feb 13. [Epub ahead of print]
PMID:
22289056
[PubMed - as supplied by publisher]
Two methods can simultaneously display both intramuscular nerves and blood vessels.
Yu DZ, Liu AT, Zhang JL, Dang RS, Chen G, Liu BL, Han T, Yi J, Nagasao T, Jiang H.
Plast Reconstr Surg. 2012 Feb;129(2):401-11.
PMID:
22286423
[PubMed - in process]
Synthesis, characterization and biological activities of some new chromium molybdenum and tungsten complexes with 2,6-diaminopyridine.
Soliman AA, Ali SA, Marei AH, Nassar DH.
Spectrochim Acta A Mol Biomol Spectrosc. 2012 Apr;89:329-32. Epub 2011 Dec 30.
PMID:
22286054
[PubMed - in process]
Tuning the Photochromic Properties of Molybdenum Bisphosphonate Polyoxometalates.
El Moll H, Dolbecq A, Mbomekalle IM, Marrot J, Deniard P, Dessapt R, Mialane P.
Inorg Chem. 2012 Jan 27. [Epub ahead of print]
PMID:
22283587
[PubMed - as supplied by publisher]
In vivo evaluation of defined polished titanium surfaces to prevent soft tissue adhesion.
Hayes JS, Welton JL, Wieling R, Richards RG.
J Biomed Mater Res B Appl Biomater. 2012 Jan 27. doi: 10.1002/jbm.b.31967. [Epub ahead of print]
PMID:
22282225
[PubMed - as supplied by publisher]
Reaction dynamics of Mo + O(2) ? MoO + O studied by a crossed-beam velocity map imaging technique.
Honma K, Matsumoto Y.
J Chem Phys. 2012 Jan 21;136(3):034301.
PMID:
22280754
[PubMed - in process]
A new class of electrocatalysts for hydrogen production from water electrolysis: metal monolayers supported on low-cost transition metal carbides.
Esposito DV, Hunt ST, Kimmel YC, Chen JG.
J Am Chem Soc. 2012 Feb 15;134(6):3025-33. Epub 2012 Feb 1.
PMID:
22280370
[PubMed - in process]
Process development for the separation and recovery of Mo and Co from chloride leach liquors of petroleum refining catalyst by solvent extraction.
Banda R, Sohn SH, Lee MS.
J Hazard Mater. 2012 Jan 9. [Epub ahead of print]
PMID:
22336581
[PubMed - as supplied by publisher]
Selective cleavage of pepsin by molybdenum metallopeptidase.
Yenjai S, Malaikaew P, Liwporncharoenvong T, Buranaprapuk A.
Biochem Biophys Res Commun. 2012 Feb 5. [Epub ahead of print]
PMID:
22330807
[PubMed - as supplied by publisher]
Iminopyridine Complexes of Manganese, Rhenium, and Molybdenum Derived from Amino Ester Methylserine and Peptides Gly-Gly, Gly-Val, and Gly-Gly-Gly: Self-Assembly of the Peptide Chains.
Alvarez CM, García-Rodríguez R, Miguel D.
Inorg Chem. 2012 Feb 13. [Epub ahead of print]
PMID:
22329711
[PubMed - as supplied by publisher]
Low-Temperature, Solution-Processed MoO(x) for Efficient and Stable Organic Solar Cells.
Zilberberg K, Gharbi H, Behrendt A, Trost S, Riedl T.
ACS Appl Mater Interfaces. 2012 Feb 15. [Epub ahead of print]
PMID:
22324481
[PubMed - as supplied by publisher]
A molecular MoS? edge site mimic for catalytic hydrogen generation.
Karunadasa HI, Montalvo E, Sun Y, Majda M, Long JR, Chang CJ.
Science. 2012 Feb 10;335(6069):698-702.
PMID:
22323816
[PubMed - in process]
The use of total reflectance X-ray fluorescence (TXRF) for the determination of metals in the pharmaceutical industry.
Antosz FJ, Xiang Y, Diaz AR, Jensen AJ.
J Pharm Biomed Anal. 2012 Jan 16. [Epub ahead of print]
PMID:
22316622
[PubMed - as supplied by publisher]
Kinetic Resolution of Planar-Chiral (?(6) -Arene)Chromium Complexes by Molybdenum-Catalyzed Asymmetric Ring-Closing Metathesis.
Ogasawara M, Wu WY, Arae S, Watanabe S, Morita T, Takahashi T, Kamikawa K.
Angew Chem Int Ed Engl. 2012 Feb 3. doi: 10.1002/anie.201108292. [Epub ahead of print]
PMID:
22308166
[PubMed - as supplied by publisher]
Measurement of mass attenuation coefficients of Rhizophora spp. binderless particleboards in the 16.59-25.26keV photon energy range and their density profile using x-ray computed tomography.
Marashdeh MW, Bauk S, Tajuddin AA, Hashim R.
Appl Radiat Isot. 2012 Jan 20. [Epub ahead of print]
PMID:
22304963
[PubMed - as supplied by publisher]
Nitrite and Nitrite Reductases: From Molecular Mechanisms to Significance in Human Health and Disease.
Castiglione N, Rinaldo S, Giardina G, Stelitano V, Cutruzzolà F.
Antioxid Redox Signal. 2012 Feb 5. [Epub ahead of print]
PMID:
22304560
[PubMed - as supplied by publisher]
Molybdenum(vi) catalysts obtained from ?(3)-allyl dicarbonyl precursors: Synthesis, characterization and catalytic performance in cyclooctene epoxidation.
Gamelas CA, Gomes AC, Bruno SM, Almeida Paz FA, Valente AA, Pillinger M, Romão CC, Gonçalves IS.
Dalton Trans. 2012 Feb 2. [Epub ahead of print]
PMID:
22302175
[PubMed - as supplied by publisher]
Field-Effect Tunneling Transistor Based on Vertical Graphene Heterostructures.
Britnell L, Gorbachev RV, Jalil R, Belle BD, Schedin F, Mishchenko A, Georgiou T, Katsnelson MI, Eaves L, Morozov SV, Peres NM, Leist J, Geim AK, Novoselov KS, Ponomarenko LA.
Science. 2012 Feb 2. [Epub ahead of print]
PMID:
22300848
[PubMed - as supplied by publisher]
Spectroscopic reflectometry of mirror surfaces during plasma exposure.
Wisse M, Eren B, Marot L, Steiner R, Meyer E.
Rev Sci Instrum. 2012 Jan;83(1):013509.
PMID:
22299953
[PubMed - in process]
[Absorption characteristics of molybdenum by reed and cattail].
Lian JJ, Xu SG, Han CW.
Huan Jing Ke Xue. 2011 Nov;32(11):3335-40. Chinese.
PMID:
22295632
[PubMed - in process]
Conserved Signal Peptide Recognition Systems across the Prokaryotic Domains.
Coulthurst SJ, Dawson A, Hunter WN, Sargent F.
Biochemistry. 2012 Feb 13. [Epub ahead of print]
PMID:
22289056
[PubMed - as supplied by publisher]
Two methods can simultaneously display both intramuscular nerves and blood vessels.
Yu DZ, Liu AT, Zhang JL, Dang RS, Chen G, Liu BL, Han T, Yi J, Nagasao T, Jiang H.
Plast Reconstr Surg. 2012 Feb;129(2):401-11.
PMID:
22286423
[PubMed - in process]
Synthesis, characterization and biological activities of some new chromium molybdenum and tungsten complexes with 2,6-diaminopyridine.
Soliman AA, Ali SA, Marei AH, Nassar DH.
Spectrochim Acta A Mol Biomol Spectrosc. 2012 Apr;89:329-32. Epub 2011 Dec 30.
PMID:
22286054
[PubMed - in process]
Tuning the Photochromic Properties of Molybdenum Bisphosphonate Polyoxometalates.
El Moll H, Dolbecq A, Mbomekalle IM, Marrot J, Deniard P, Dessapt R, Mialane P.
Inorg Chem. 2012 Jan 27. [Epub ahead of print]
PMID:
22283587
[PubMed - as supplied by publisher]
In vivo evaluation of defined polished titanium surfaces to prevent soft tissue adhesion.
Hayes JS, Welton JL, Wieling R, Richards RG.
J Biomed Mater Res B Appl Biomater. 2012 Jan 27. doi: 10.1002/jbm.b.31967. [Epub ahead of print]
PMID:
22282225
[PubMed - as supplied by publisher]
Reaction dynamics of Mo + O(2) ? MoO + O studied by a crossed-beam velocity map imaging technique.
Honma K, Matsumoto Y.
J Chem Phys. 2012 Jan 21;136(3):034301.
PMID:
22280754
[PubMed - in process]
A new class of electrocatalysts for hydrogen production from water electrolysis: metal monolayers supported on low-cost transition metal carbides.
Esposito DV, Hunt ST, Kimmel YC, Chen JG.
J Am Chem Soc. 2012 Feb 15;134(6):3025-33. Epub 2012 Feb 1.
PMID:
22280370
[PubMed - in process]
Plasma Restoration of Endothelial Glycocalyx in a Rodent Model of Hemorrhagic Shock.
Kozar RA, Peng Z, Zhang R, Holcomb JB, Pati S, Park P, Ko TC, Paredes A.
Anesth Analg. 2011 Feb 23. [Epub ahead of print]
PMID:
21346161
[PubMed - as supplied by publisher]
Proud sponsors of Aeromat 2012. Please join us and our customers & co-sponsors Boeing and ATI on
June 18-20, 2012
in Charlotte, North Carolina
American Elements specializes in producing high purity Lanthanated Molybdenum Shot with the highest possible density and smallest possible average grain sizes for use in semiconductor,
Chemical Vapor Deposition (CVD) and Physical Vapor Deposition (PVD) processes including Thermal and Electron Beam (E-Beam) Evaporation, Low Temperature Organic Evaporation, Atomic Layer Deposition (ALD), Metallic-Organic and Chemical Vapor Deposition (MOCVD). Our standard Shot sizes range from 1-3mm . We can also provide Shot outside this range for ultra high purity thin film applications, such as fuel cells and solar energy layers. Lanthanated molybdenum doped products typically display better ductility characteristics after recrystallization than pure molybdenum or HCT moly and have a higher recrystallization temperature. Materials are produced using crystallization , solid state and other ultra high purification processes such as sublimation. American Elements specializes in producing custom compositions for commercial and research applications and for new proprietary technologies. American Elements also casts any of the rare earth metals and most other advanced materials into rod, bar or plate form , as well as other machined shapes and through other processes such as nanoparticles (See also application discussion at Nanotechnology Information and at Quantum Dots ) and in the form of solutions and organometallics. See research below. We also produce Lanthanated Molybdenum as rod , ingot, powder, pieces, disc, granules, wire, and in compound forms, such as oxide. Other shapes are available by request.
Molybdenum is a Block D, Group 6, Period 5 element. The number of electrons in each of Molybdenum's shells is 2, 8, 18, 13, 1 and its electronic configuration is [Kr] 4d5 5s1. In its elemental form molybdenum's CAS number is 7439-98-7. The molybdenum atom has a radius of 136.3.pm and it's Van der Waals radius is 200.pm. Molybdenum is toxic unless it is in small quantities. Molybdenum has the third highest melting point of any element, exceeded only by tungsten and tantalum. Molybdenum is a catalyst in the oil refining. It has many other applications, including in catalysts, pigments, corrosion inhibitors and lubricants. It has 
a very high elastic modulus. Molybdenum is available
as metal and compounds with purities from 99% to 99.999% (ACS grade to ultra-high purity); metals in the form of foil, sputtering target, and rod, and compounds as submicron and nanopowder. It is used in steel alloys to add hardness and raise melting points. It is a component in Hastelloys brand steel. Molybdenum is used in nuclear reactors and aerospace components. Molybdenum was first discovered by Carl Wilhelm in 1778. The origin of the name Molybdenum comes from the Greek word molubdos meaning lead. See Molybdenum research below. 
Lanthanum is a Block F, Group 3, Period 6 element. The number of electrons in each of Lanthanum's shells is 2, 8, 18, 18, 9, 2 and its electronic configuration is [Xe] 5d1 6s2. In its elemental form lanthanum 's CAS number is 7439-91-0. The lanthanum atom has a radius of 187.pm and it's Van der Waals radius is 200.pm. Lanthanum and compounds of 
Lanthanum are somewhat toxic. Lanthanum is one of the products manufactured and distributed under the tradename AE Rare Earths
. Lanthanum is the first element in the rare earth or lanthanide series. It is the model for all the other trivalent rare earths. After cerium, it is the second most abundant of the rare earths. Lanthanum is available as metal and compounds with purities from 99% to 99.999% (ACS grade to ultra high purity); metals in the form of foil, sputtering target, and rod, and compounds as submicron and nanopowder.Lanthanum-rich lanthanide compositions have been used extensively for cracking reactions in FCC catalysts, especially to manufacture low-octane fuel for heavy crude oil. The name Lanthanum originates from the Greek word Lanthaneia which means 'To lie hidden'. See Lanthanum research below.
