American Elements Logo and U.S. Registered Trademark

 
Molybdenum Disulfide Sputtering Target
High Purity MoS2 Sputtering Target
Product Product Code Order or Specifications
(2N) 99% Molybdenum Disulfide Sputtering Target MO-S-02-ST Contact American Elements
(2N5) 99.5% Molybdenum Disulfide Sputtering Target MO-S-025-ST Contact American Elements
(3N) 99.9% Molybdenum Disulfide Sputtering Target MO-S-03-ST Contact American Elements
(3N5) 99.95% Molybdenum Disulfide Sputtering Target MO-S-035-ST Contact American Elements
(4N) 99.99% Molybdenum Disulfide Sputtering Target MO-S-04-ST Contact American Elements
(5N) 99.999% Molybdenum Disulfide Sputtering Target MO-S-05-ST Contact American Elements
American Elements produces to many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopeia/British Pharmacopeia) and follows applicable ASTM testing standards.See safety data and research below and pricing/lead time above. American Elements specializes in producing high purity Molybdenum Disulfide Sputtering Targets with the highest possible density High Purity (99.99%) Metallic Sputtering Targetand smallest possible average grain sizes for use in semiconductor, chemical vapor deposition (CVD) and physical vapor deposition (PVD) display and optical applications. Our standard Sputtering Targets for thin film are available monoblock or bonded with dimensions and configurations up to 820 mm with hole drill locations and threading, beveling, grooves and backing designed to work with both older sputtering devises as well as the latest process equipment, such as large area coating for solar energy or fuel cells and flip-chip applications. Research sized targets are also produced as well as custom sizes and alloys. All targets are analyzed using best demonstrated techniques including X-Ray Fluorescence (XRF), Glow Discharge Mass Spectrometry (GDMS), and Inductively Coupled Plasma (ICP). "Sputtering" allows for thin film deposition of an ultra high purity sputtering metallic or oxide material onto another solid substrate by the controlled removal and conversion of the target material into a directed gaseous/plasma phase through ionic bombardment. We can also provide targets outside this range in addition to just about any size rectangular, annular, or oval target. Materials are produced using crystallization, solid state and other ultra high purification processes such as sublimation. American Elements specializes in producing custom compositions for commercial and research applications and for new proprietary technologies. American Elements also casts any of the rare earth metals and most other advanced materials into rod, bar or plate form, as well as other machined shapes and through other processes such as nanoparticles (See also application discussion at Nanotechnology Information and at Quantum Dots) and in the form of solutions and organometallics. We also produce Molybdenum as disc, granules, ingot, pellets, pieces, powder, and rod. Other shapes are available by request.

Molybdenum(Mo) atomic and molecular weight, atomic number and elemental symbolMolybdenum is a Block D, Group 6, Period 5 element. The number of electrons in each of Molybdenum's shells is 2, 8, 18, 13, 1 and its electronic configuration is [Kr] 4d5 5s1. In its elemental form molybdenum's CAS number is 7439-98-7. The molybdenum atom has a radius of 136.3.pm and it's Van der Waals radius is 200.pm. Molybdenum is toxic unless it is in small quantities. Molybdenum has the third highest melting point of any element, exceeded only by tungsten and tantalum. Molybdenum is a catalyst in the oil refining. It has many other applications, including in catalysts, pigments, corrosion inhibitors and lubricants. It has Elemental Molybdenuma very high elastic modulus. Molybdenum is availableMolybdenum Bohr Model as metal and compounds with purities from 99% to 99.999% (ACS grade to ultra-high purity); metals in the form of foil, sputtering target, and rod, and compounds as submicron and nanopowder. It is used in steel alloys to add hardness and raise melting points. It is a component in Hastelloys brand steel. Molybdenum is used in nuclear reactors and aerospace components. Molybdenum was first discovered by Carl Wilhelm in 1778. The origin of the name Molybdenum comes from the Greek word molubdos meaning lead. See Molybdenum research below.

Sulfur(S) Aluminum(Al) atomic and molecular weight, atomic number and elemental symbolSulfur is a Block P, Group 16, Period 3 element. The number of electrons in each of Sulfur's shells is 2, 8, 6 and its electronic configuration is [Ne]3s2 3p4. In its elemental form sulfur's CAS number is 7704-34-9. The sulfur atom has a radius of 100pm and it's Van der Waals radius is 180pm. Sulfur is a crucial element for all life and serves as both fuels and respiratory (oxygen-replacing) materials for simple organisms.  In nature, sulfur can be found in hot springs, meteorites, volcanoes, and as galena, gypsum, Epsom salts, and barite. Sulfur, when organically bonded, is a component of all proteins, as the amino acids methionine Sulfur Bohr Modeland cysteine. In organic form, Sulfur is present in the vitamins thiamine and biotin. Sulfur is also a vital part of many enzymes and also in antioxidant molecules like glutathione and thioredoxin.Sulfur is available as compounds with purities from 99% to 99.9999% (ACS grade to ultra-high purity). Sulfur has been known since ancient times but was not accepted as an element until 1777. Antoine Lavoisier helped to convince the scientific commuity that sulfus is an element and not a compound. See Sulfur research below.

Formula CAS No. Appearance Molecular Weight Density Melting Point Boiling Point
MoS2            
PRODUCT CATALOG Molybdenum Products News Foil Submicron & Nanopowder Tolling Ultra High Purity Sputtering Target Crystal Growth Rod, Plate, Powder, etc. Home

Have a Question? Ask a Chemical Engineer or Material Scientist   Request an MSDS or Certificate of Analysis

 


Search by Material, Product Name, Product Code, CAS Number, Formula, Element, Anion, Form, EC Number, MDL Number or PubChem ID.
German   Korean   French   Japanese   Spanish   Chinese (Simplified)   Portuguese   Russian   Chinese (Taiwan)   Italian   Turkish   Polish   Dutch   Czech   Swedish   Hungarian   Danish   Hebrew

Production Catalog Available in 36 Countries & Languages

PACKAGING SPECIFICATIONS FOR BULK & RESEARCH QUANTITIES


Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Shipping documentation includes a Certificate of Analysis and Material Safety Data Sheet (MSDS). Solutions are packaged in polypropylene, plastic or glass jars up to palletized 440 gallon liquid totes.

 

 

Show me more forms of Molybdenum
 
Customers for this product have also looked at:
Molybdenum Nanoparticles Molybdenum Rod Nickel Molybdenum Alloy
Titanium Molybdenum Alloy
Molybdenum Sputtering Target
Molybdenum Oxide Molybdenum Powder Molybdenum Acetate Molybdenum Wire Molybdenum Oxide Pellets
Molybdenum Pellets Molybdenum Sulfate Molybdenum Chloride Molybdenum Metal Molybdenum Foil

 

Recent Research & Development for Molybdenum

  • Process development for the separation and recovery of Mo and Co from chloride leach liquors of petroleum refining catalyst by solvent extraction. Banda R, Sohn SH, Lee MS. J Hazard Mater. 2012 Jan 9. [Epub ahead of print] PMID: 22336581 [PubMed - as supplied by publisher]

  • Selective cleavage of pepsin by molybdenum metallopeptidase. Yenjai S, Malaikaew P, Liwporncharoenvong T, Buranaprapuk A. Biochem Biophys Res Commun. 2012 Feb 5. [Epub ahead of print] PMID: 22330807 [PubMed - as supplied by publisher]

  • Iminopyridine Complexes of Manganese, Rhenium, and Molybdenum Derived from Amino Ester Methylserine and Peptides Gly-Gly, Gly-Val, and Gly-Gly-Gly: Self-Assembly of the Peptide Chains. Alvarez CM, García-Rodríguez R, Miguel D. Inorg Chem. 2012 Feb 13. [Epub ahead of print] PMID: 22329711 [PubMed - as supplied by publisher]

  • Low-Temperature, Solution-Processed MoO(x) for Efficient and Stable Organic Solar Cells. Zilberberg K, Gharbi H, Behrendt A, Trost S, Riedl T. ACS Appl Mater Interfaces. 2012 Feb 15. [Epub ahead of print] PMID: 22324481 [PubMed - as supplied by publisher]

  • A molecular MoS? edge site mimic for catalytic hydrogen generation. Karunadasa HI, Montalvo E, Sun Y, Majda M, Long JR, Chang CJ. Science. 2012 Feb 10;335(6069):698-702. PMID: 22323816 [PubMed - in process]

  • The use of total reflectance X-ray fluorescence (TXRF) for the determination of metals in the pharmaceutical industry. Antosz FJ, Xiang Y, Diaz AR, Jensen AJ. J Pharm Biomed Anal. 2012 Jan 16. [Epub ahead of print] PMID: 22316622 [PubMed - as supplied by publisher]

  • Kinetic Resolution of Planar-Chiral (?(6) -Arene)Chromium Complexes by Molybdenum-Catalyzed Asymmetric Ring-Closing Metathesis. Ogasawara M, Wu WY, Arae S, Watanabe S, Morita T, Takahashi T, Kamikawa K. Angew Chem Int Ed Engl. 2012 Feb 3. doi: 10.1002/anie.201108292. [Epub ahead of print] PMID: 22308166 [PubMed - as supplied by publisher]

  • Measurement of mass attenuation coefficients of Rhizophora spp. binderless particleboards in the 16.59-25.26keV photon energy range and their density profile using x-ray computed tomography. Marashdeh MW, Bauk S, Tajuddin AA, Hashim R. Appl Radiat Isot. 2012 Jan 20. [Epub ahead of print] PMID: 22304963 [PubMed - as supplied by publisher]

  • Nitrite and Nitrite Reductases: From Molecular Mechanisms to Significance in Human Health and Disease. Castiglione N, Rinaldo S, Giardina G, Stelitano V, Cutruzzolà F. Antioxid Redox Signal. 2012 Feb 5. [Epub ahead of print] PMID: 22304560 [PubMed - as supplied by publisher]

  • Molybdenum(vi) catalysts obtained from ?(3)-allyl dicarbonyl precursors: Synthesis, characterization and catalytic performance in cyclooctene epoxidation. Gamelas CA, Gomes AC, Bruno SM, Almeida Paz FA, Valente AA, Pillinger M, Romão CC, Gonçalves IS. Dalton Trans. 2012 Feb 2. [Epub ahead of print] PMID: 22302175 [PubMed - as supplied by publisher]

  • Field-Effect Tunneling Transistor Based on Vertical Graphene Heterostructures. Britnell L, Gorbachev RV, Jalil R, Belle BD, Schedin F, Mishchenko A, Georgiou T, Katsnelson MI, Eaves L, Morozov SV, Peres NM, Leist J, Geim AK, Novoselov KS, Ponomarenko LA. Science. 2012 Feb 2. [Epub ahead of print] PMID: 22300848 [PubMed - as supplied by publisher]

  • Spectroscopic reflectometry of mirror surfaces during plasma exposure. Wisse M, Eren B, Marot L, Steiner R, Meyer E. Rev Sci Instrum. 2012 Jan;83(1):013509. PMID: 22299953 [PubMed - in process]

  • [Absorption characteristics of molybdenum by reed and cattail]. Lian JJ, Xu SG, Han CW. Huan Jing Ke Xue. 2011 Nov;32(11):3335-40. Chinese. PMID: 22295632 [PubMed - in process]

  • Conserved Signal Peptide Recognition Systems across the Prokaryotic Domains. Coulthurst SJ, Dawson A, Hunter WN, Sargent F. Biochemistry. 2012 Feb 13. [Epub ahead of print] PMID: 22289056 [PubMed - as supplied by publisher]

  • Two methods can simultaneously display both intramuscular nerves and blood vessels. Yu DZ, Liu AT, Zhang JL, Dang RS, Chen G, Liu BL, Han T, Yi J, Nagasao T, Jiang H. Plast Reconstr Surg. 2012 Feb;129(2):401-11. PMID: 22286423 [PubMed - in process]

  • Synthesis, characterization and biological activities of some new chromium molybdenum and tungsten complexes with 2,6-diaminopyridine. Soliman AA, Ali SA, Marei AH, Nassar DH. Spectrochim Acta A Mol Biomol Spectrosc. 2012 Apr;89:329-32. Epub 2011 Dec 30. PMID: 22286054 [PubMed - in process]

  • Tuning the Photochromic Properties of Molybdenum Bisphosphonate Polyoxometalates. El Moll H, Dolbecq A, Mbomekalle IM, Marrot J, Deniard P, Dessapt R, Mialane P. Inorg Chem. 2012 Jan 27. [Epub ahead of print] PMID: 22283587 [PubMed - as supplied by publisher]

  • In vivo evaluation of defined polished titanium surfaces to prevent soft tissue adhesion. Hayes JS, Welton JL, Wieling R, Richards RG. J Biomed Mater Res B Appl Biomater. 2012 Jan 27. doi: 10.1002/jbm.b.31967. [Epub ahead of print] PMID: 22282225 [PubMed - as supplied by publisher]

  • Reaction dynamics of Mo + O(2) ? MoO + O studied by a crossed-beam velocity map imaging technique. Honma K, Matsumoto Y. J Chem Phys. 2012 Jan 21;136(3):034301. PMID: 22280754 [PubMed - in process]

  • A new class of electrocatalysts for hydrogen production from water electrolysis: metal monolayers supported on low-cost transition metal carbides. Esposito DV, Hunt ST, Kimmel YC, Chen JG. J Am Chem Soc. 2012 Feb 15;134(6):3025-33. Epub 2012 Feb 1. PMID: 22280370 [PubMed - in process]

 

Recent Research & Development for Sulfur

  • Self-assembly of a sulphur-terminated graphene nanoribbon within a single-walled carbon nanotube. Chuvilin A, Bichoutskaia E, Gimenez-Lopez MC, Chamberlain TW, Rance GA, Kuganathan N, Biskupek J, Kaiser U, Khlobystov AN. Nat Mater. 2011 Aug 7. doi: 10.1038/nmat3082. [Epub ahead of print] PMID: 21822259 [PubMed - as supplied by publisher]

  • Crystallization and preliminary X-ray analysis of the yeast tRNA-thiouridine modification protein 1 (Tum1p). Qiu R, Wang F, Liu M, Yang Z, Wu T, Ji C. Acta Crystallogr Sect F Struct Biol Cryst Commun. 2011 Aug 1;67(Pt 8):953-5. Epub 2011 Jul 27. PMID: 21821903 [PubMed - in process]

  • Characterization of Bacillus thuringiensis L-isoleucine dioxygenase toward the production of useful amino acids. Hibi M, Kawashima T, Kodera T, Smirnov SV, Sokolov PM, Sugiyama M, Shimizu S, Yokozeki K, Ogawa J. Appl Environ Microbiol. 2011 Aug 5. [Epub ahead of print] PMID: 21821743 [PubMed - as supplied by publisher]

  • Characterization of the sulfurtransferase family from Oryza sativa L. Guretzki S, Papenbrock J. Plant Physiol Biochem. 2011 Jul 23. [Epub ahead of print] PMID: 21821426 [PubMed - as supplied by publisher]

  • Development of a small-scale bioreactor method to monitor the molecular diversity and environmental impacts of bacterial biofilm communities from an acid mine drainage impacted creek. Cole M, Wrubel J, Henegan P, Janzen C, Holt J, Tobin T. J Microbiol Methods. 2011 Jul 28. [Epub ahead of print] PMID: 21821067 [PubMed - as supplied by publisher]

  • In situ incorporation of nickel nanoparticles into the mesopores of MCM-41 by manipulation of solvent-solute interaction and its activity toward adsorptive desulfurization of gas oil. Samadi-Maybodi A, Teymouri M, Vahid A, Miranbeigi A. J Hazard Mater. 2011 Jul 6. [Epub ahead of print] PMID: 21820806 [PubMed - as supplied by publisher]

  • Stearoyl-CoA desaturase is an essential enzyme for the parasitic protist Trypanosoma brucei. Alloatti A, Gupta S, Gualdrón-López M, Nguewa PA, Altabe SG, Deumer G, Wallemacq P, Michels PA, Uttaro AD. Biochem Biophys Res Commun. 2011 Jul 28. [Epub ahead of print] PMID: 21820408 [PubMed - as supplied by publisher]

  • The use of multi-element stable isotope analysis to monitor the origin of chondroitin sulfates. Thomas F, Jamin E, Shimoo K, Nagao J, Osaki Y, Granier C. Rapid Commun Mass Spectrom. 2011 Sep 15;25(17):2533-7. doi: 10.1002/rcm.5159. PMID: 21818814 [PubMed - in process]

  • Sulphur isotopes in animal hair track distance to sea. Zazzo A, Monahan FJ, Moloney AP, Green S, Schmidt O. Rapid Commun Mass Spectrom. 2011 Sep 15;25(17):2371-8. doi: 10.1002/rcm.5131. PMID: 21818798 [PubMed - in process]

  • Experimental and Theoretical Evidence of Aromatic Behavior in Heterobenzene-Like Molecules with Metal-Metal Multiple Bonds. Fang W, He Q, Tan ZF, Liu CY, Lu X, Murillo CA. Chemistry. 2011 Aug 4. doi: 10.1002/chem.201003693. [Epub ahead of print] PMID: 21818792 [PubMed - as supplied by publisher]

  • Rhodovulum phaeolacus sp. nov. a phototrophic alphaproteobacterium isolated from a brown pond. Venkata Naga Satya Lakshmi K, Sasikala C, Venkata Ramana V, Veera Venkata Ramaprasad E, Venkata Ramana C. J Gen Appl Microbiol. 2011;57(3):145-51. PMID: 21817826 [PubMed - in process]

  • Comparative data on effects of leading pretreatments and enzyme loadings and formulations on sugar yields from different switchgrass sources. Wyman CE, Balan V, Dale BE, Elander RT, Falls M, Hames B, Holtzapple MT, Ladisch MR, Lee YY, Mosier N, Pallapolu VR, Shi J, Thomas SR, Warner RE. Bioresour Technol. 2011 Jun 21. [Epub ahead of print] PMID: 21816612 [PubMed - as supplied by publisher]

  • Target loads of atmospheric sulfur deposition for the protection and recovery of acid-sensitive streams in the Southern Blue Ridge Province. Sullivan TJ, Cosby BJ, Jackson WA. J Environ Manage. 2011 Aug 2. [Epub ahead of print] PMID: 21816535 [PubMed - as supplied by publisher]

  • Differential effects of a post-anthesis fertilizer regimen on the wheat flour proteome determined by quantitative 2-DE. Altenbach SB, Tanaka CK, Hurkman WJ, Whitehand LC, Vensel WH, Dupont FM. Proteome Sci. 2011 Aug 4;9(1):46. [Epub ahead of print] PMID: 21816081 [PubMed - as supplied by publisher]

  • Comparative toxicity of arsenic metabolites in human bladder cancer EJ-1 cells. Naranmandura H, Michael CW, Xu S, Lee J, Leslie E, Weinfeld M, Le XC. Chem Res Toxicol. 2011 Aug 4. [Epub ahead of print] PMID: 21815631 [PubMed - as supplied by publisher]

  • The Effects of Different Garlic-derived Allyl Sulfides on Peroxidative Processes and Anaerobic Sulfur Metabolism in Mouse Liver. Iciek MB, Kowalczyk-Pachel D, Kwiecien I, Dudek MB. Phytother Res. 2011 Aug 4. doi: 10.1002/ptr.3572. [Epub ahead of print] PMID: 21815229 [PubMed - as supplied by publisher]

  • A combined model of hepatic polyamine and sulfur amino acid metabolism to analyze S-adenosyl methionine availability. Reyes-Palomares A, Montañez R, Sánchez-Jiménez F, Medina MA. Amino Acids. 2011 Aug 4. [Epub ahead of print] PMID: 21814788 [PubMed - as supplied by publisher]

  • Microbial gene functions enriched in the Deepwater Horizon deep-sea oil plume. Lu Z, Deng Y, Van Nostrand JD, He Z, Voordeckers J, Zhou A, Lee YJ, Mason OU, Dubinsky EA, Chavarria KL, Tom LM, Fortney JL, Lamendella R, Jansson JK, D'haeseleer P, Hazen TC, Zhou J. ISME J. 2011 Aug 4. doi: 10.1038/ismej.2011.91. [Epub ahead of print] PMID: 21814288 [PubMed - as supplied by publisher]

  • 1,1'-(3-Methyl-4-phenylthieno[2,3-b]thiophene-2,5-diyl)diethanone as a Building Block in Heterocyclic Synthesis. Novel Synthesis of Some Pyrazole and Pyrimidine Derivatives. Mabkhot YN, Al-Majid AM, Barakat A, Alshahrani S, Siddiqui Y. Molecules. 2011 Aug 3;16(8):6502-11. PMID: 21814162 [PubMed - in process]

  • Towards the Growth of an Aligned Single-Layer MoS2 Film. Kim D, Sun D, Lu W, Cheng Z, Zhu Y, Le D, Rahman TS, Bartels L. Langmuir. 2011 Aug 3. [Epub ahead of print] PMID: 21812475 [PubMed - as supplied by publisher]

 

 

 

American Elements is a copyrighted U.S. Trademark. All rights reserved.