Niobium(V) Iodide

CAS #:

Linear Formula:

NbI5

MDL Number:

MFCD00016238

EC No.:

237-422-1

ORDER

PRODUCT Product Code ORDER SAFETY DATA TECHNICAL DATA
(2N) 99% Niobium(V) Iodide
NB5-I-02
Pricing > SDS > Data Sheet >
(2N5) 99.5% Niobium(V) Iodide
NB5-I-025
Pricing > SDS > Data Sheet >
(3N) 99.9% Niobium(V) Iodide
NB5-I-03
Pricing > SDS > Data Sheet >
(3N5) 99.95% Niobium(V) Iodide
NB5-I-035
Pricing > SDS > Data Sheet >
(4N) 99.99% Niobium(V) Iodide
NB5-I-04
Pricing > SDS > Data Sheet >
(5N) 99.999% Niobium(V) Iodide
NB5-I-05
Pricing > SDS > Data Sheet >

Niobium(V) Iodide Properties (Theoretical)

Compound Formula I5Nb
Molecular Weight 727.43
Appearance solid
Melting Point >300 °C
Boiling Point N/A
Density N/A
Solubility in H2O N/A
Exact Mass 727.428717
Monoisotopic Mass 727.428711 Da

Niobium(V) Iodide Health & Safety Information

Signal Word Danger
Hazard Statements H314
Hazard Codes C
Precautionary Statements P260-P264-P280-P301+P330+P331-P303+P361+P353-P304+P340+P310-P305+P351+P338-P310-P321-P363-P405-P501
Risk Codes N/A
Safety Statements N/A
Transport Information UN 3260 8/PG II
WGK Germany 3
GHS Pictograms

View and Print SDS

SAFETY DATA SHEET

Date Accessed: 04/16/2024
Date Revised:01/15/2022

SECTION 1. IDENTIFICATION

Product Name: Niobium(V) Iodide

Product Number: All applicable American Elements product codes, e.g. NB5-I-02 , NB5-I-025 , NB5-I-03 , NB5-I-035 , NB5-I-04 , NB5-I-05

CAS #: 13779-92-5

Relevant identified uses of the substance: Scientific research and development

Supplier details:
American Elements
10884 Weyburn Ave.
Los Angeles, CA 90024
Tel: +1 310-208-0551
Fax: +1 310-208-0351

Emergency telephone number:
Domestic, North America: +1 800-424-9300
International: +1 703-527-3887


SECTION 2. HAZARDS IDENTIFICATION

Classification of the substance or mixture:
GHS Classification in accordance with 29 CFR 1910 (OSHA HCS)
Skin corrosion (Category 1B), H314
Serious eye damage (Category 1), H318

Corrosion - GHS05

Signal word: Danger
Hazard statement(s):
H314 Causes severe skin burns and eye damage.
Precautionary statement(s):
P260 Do not breathe dust or mist.
P264 Wash skin thoroughly after handling.
P280 Wear protective gloves/ protective clothing/ eye protection/ face protection.
P301 + P330 + P331 IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P303 + P361 + P353 IF ON SKIN (or hair): Remove/ Take off immediately all contaminated clothing. Rinse skin with water/ shower.
P304 + P340 IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P310 Immediately call a POISON CENTER/doctor.
P321 Specific treatment (see supplemental first aid instructions on this label).
P363 Wash contaminated clothing before reuse.
P405 Store locked up.
P501 Dispose of contents/ container to an approved waste disposal plant.
Hazards not otherwise classified (HNOC) or not covered by GHS:
Lachrymator


SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS

Formula : NbI5
Molecular weight : 727.43 g/mol
CAS-No. : 13779-92-5
EC-No. : 237-422-1


SECTION 4. FIRST AID MEASURES

General advice:
Consult a physician. Show this safety data sheet to the doctor in attendance.Move out of dangerous area.
If inhaled:
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact:
Take off contaminated clothing and shoes immediately. Wash off with soap and plenty of water. Consult a physician.
In case of eye contact:
Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.Continue rinsing eyes during transport to hospital.
If swallowed:
Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
Most important symptoms and effects, both acute and delayed:
The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in section 11
Indication of any immediate medical attention and special treatment needed:
No data available


SECTION 5. FIREFIGHTING MEASURES

Suitable extinguishing media:
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture:
Hydrogen iodide, niobium oxides
Advice for firefighters:
Wear self-contained breathing apparatus for firefighting if necessary.
Further information:
No data available


SECTION 6. ACCIDENTAL RELEASE MEASURES

Personal precautions, protective equipment and emergency procedures:
Use personal protective equipment. Avoid dust formation. Avoid breathing vapours, mist or gas. Ensure adequate ventilation. Evacuate personnel to safe areas. Avoid breathing dust.
Environmental precautions:
Do not let product enter drains.
Methods and materials for containment and cleaning up:
Pick up and arrange disposal without creating dust. Sweep up and shovel. Keep in suitable, closed containers for disposal.


SECTION 7. HANDLING AND STORAGE

Precautions for safe handling:
Avoid formation of dust and aerosols. Provide appropriate exhaust ventilation at places where dust is formed.Normal measures for preventive fire protection.
Conditions for safe storage, including any incompatibilities:
Keep container tightly closed in a dry and well-ventilated place. Light sensitive. Moisture sensitive. Storage class (TRGS 510): 8B: Non-combustible, corrosive hazardous materials


SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION

Components with workplace control parameters:
Contains no substances with occupational exposure limit values.
Exposure controls
Appropriate engineering controls:
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday.
Personal protective equipment
Eye/face protection:
Face shield and safety glasses Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin protection:
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands.
Body Protection:
Complete suit protecting against chemicals, The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection:
Where risk assessment shows air-purifying respirators are appropriate use a fullface particle respirator type N100 (US) or type P3 (EN 143) respirator cartridges as a backup to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU).
Control of environmental exposure:
Do not let product enter drains.


SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES

Form: solid
Odor: No data available
Odour Threshold No data available
pH: No data available
Melting point/freezing point: Melting point/range: > 300 °C (> 572 °F) - lit.
Initial boiling point and boiling range: No data available
Flash point: Not applicable
Evaporation rate: No data available
Flammability (solid, gas): No data available
Upper/lower flammability or explosive limits: No data available
Vapour pressure: No data available
Vapour density: No data available
Relative density: No data available
Water solubility: No data available
Partition coefficient n-octanol/water: No data available
Auto-ignition temperature: No data available
Decomposition temperature: No data available
Viscosity: No data available
Explosive properties: No data available
Oxidizing properties: No data available


SECTION 10. STABILITY AND REACTIVITY

Reactivity:
No data available
Chemical stability:
Stable under recommended storage conditions.
Possibility of hazardous reactions:
No data available
Conditions to avoid:
Avoid moisture.
Incompatible materials:
acids
Hazardous decomposition products:
Hazardous decomposition products formed under fire conditions. - Hydrogen iodide,
niobium oxides Other decomposition products - No data available


SECTION 11. TOXICOLOGICAL INFORMATION

Acute toxicity:
No data available
Inhalation: No data available
Dermal: No data available
No data available
Skin corrosion/irritation:
No data available
Serious eye damage/eye irritation:
No data available
Respiratory or skin sensitisation:
No data available
Germ cell mutagenicity:
No data available
Carcinogenicity
IARC: No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC.
ACGIH: No component of this product present at levels greater than or equal to 0.1% is identified as a carcinogen or potential carcinogen by ACGIH.
NTP: No component of this product present at levels greater than or equal to 0.1% is identified as a known or anticipated carcinogen by NTP.
OSHA: No component of this product present at levels greater than or equal to 0.1% is on OSHA’s list of regulated carcinogens.
Reproductive toxicity:
No data available
Specific target organ toxicity - single exposure:
No data available
Specific target organ toxicity - repeated exposure:
No data available
Aspiration hazard:
No data available
Additional Information
RTECS: Not available


SECTION 12. ECOLOGICAL INFORMATION

Toxicity:
No data available
Persistence and degradability:
No data available
Bioaccumulative potential:
No data available
Mobility in soil:
No data available
Results of PBT and vPvB assessment:
PBT/vPvB assessment not available as chemical safety assessment not required/not conducted
Other adverse effects:
No data available


SECTION 13. DISPOSAL CONSIDERATIONS

Waste treatment methods
Product:
Offer surplus and non-recyclable solutions to a licensed disposal company.
Contaminated packaging:
Dispose of as unused product.


SECTION 14. TRANSPORT INFORMATION

DOT (US)
UN number: 3260 Class: 8 Packing group: II
Proper shipping name: Corrosive solid, acidic, inorganic, n.o.s. (Niobium pentaiodide)
Poison Inhalation Hazard: No
IMDG
UN number: 3260 Class: 8 Packing group: II EMS-No: F-A, S-B
Proper shipping name: CORROSIVE SOLID, ACIDIC, INORGANIC, N.O.S. (Niobium
pentaiodide)
IATA
UN number: 3260 Class: 8 Packing group: II
Proper shipping name: Corrosive solid, acidic, inorganic, n.o.s. (Niobium pentaiodide)


SECTION 15. REGULATORY INFORMATION

SARA 302 Components:
No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302.
SARA 313 Components:
This material does not contain any chemical components with known CAS numbers that exceed the threshold (De Minimis) reporting levels established by SARA Title III, Section 313.
SARA 311/312 Hazards:
Chronic Health Hazard
Massachusetts Right To Know Components:
No components are subject to the Massachusetts Right to Know Act.
Pennsylvania Right To Know Components:
Niobium pentaiodide
CAS-No. 13779-92-5
New Jersey Right To Know Components:
Niobium pentaiodide
CAS-No. 13779-92-5
California Prop. 65 Components:
This product does not contain any chemicals known to State of California to cause cancer, birth defects, or any other reproductive harm.


SECTION 16. OTHER INFORMATION

Safety Data Sheet according to Regulation (EC) No. 1907/2006 (REACH). The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any guarantee of the properties of the product. American Elements shall not be held liable for any damage resulting from handling or from contact with the above product. See reverse side of invoice or packing slip for additional terms and conditions of sale. COPYRIGHT 1997-2022 AMERICAN ELEMENTS. LICENSED GRANTED TO MAKE UNLIMITED PAPER COPIES FOR INTERNAL USE ONLY.

About Niobium(V) Iodide

Iodide IonNiobium Iodide is generally immediately available in most volumes. High purity, submicron and nanopowder forms may be considered. Iodide compounds are used in internal medicine. Treating an iodide with Niobium dioxide and sulfuric acid sublimes the iodine. American Elements produces to many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia) and follows applicable ASTM testing standards. Typical and custom packaging is available. Additional technical, research and safety (MSDS) information is available as is a Reference Calculator for converting relevant units of measurement.

Niobium(V) Iodide Synonyms

Niobium(5+) pentaiodide, pentaiodoniobium, Niobium pentaiodide

Chemical Identifiers

Linear Formula NbI5
MDL Number MFCD00016238
EC No. 237-422-1
Beilstein/Reaxys No. N/A
Pubchem CID 83728
IUPAC Name pentaiodoniobium
SMILES I[Nb](I)(I)(I)I
InchI Identifier InChI=1S/5HI.Nb/h5*1H;/q;;;;;+5/p-5
InchI Key FWIYBTVHGYLSAZ-UHFFFAOYSA-I

Packaging Specifications

Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Shipping documentation includes a Certificate of Analysis and Safety Data Sheet (SDS). Solutions are packaged in polypropylene, plastic or glass jars up to palletized 440 gallon liquid totes, and 36,000 lb. tanker trucks.

Related Elements

Iodine

See more Iodine products. Iodine (atomic symbol: I, atomic number: 53) is a Block P, Group 17, Period 5 element with an atomic radius of 126.90447. The number of electrons in each of Iodine's shells is 2, 8, 18, 18, 7 and its electron configuration is [Kr] 4d10 5s2 5p5. The iodine atom has a radius of 140 pm and a Van der Waals radius of 198 pm. In its elemental form, iodine has a lustrous metallic gray appearance as a solid and a violet appearance as a gas or liquid solution. Elemental IodineIodine forms compounds with many elements, but is less active than the other halogens. It dissolves readily in chloroform, carbon tetrachloride, or carbon disulfide. Iodine compounds are important in organic chemistry and very useful in the field of medicine. Iodine was discovered and first isolated by Bernard Courtois in 1811. The name Iodine is derived from the Greek word "iodes" meaning violet.

Niobium

See more Niobium products. Niobium (atomic symbol: Nb, atomic number: 41) is a Block D, Group 5, Period 5 element with an atomic weight of 92.90638. Niobium Bohr ModelThe number of electrons in each of niobium's shells is 2, 8, 18, 12, 1 and its electron configuration is [Kr] 4d4 5s1. The niobium atom has a radius of 146 pm and a Van der Waals radius of 207 pm. Niobium was discovered by Charles Hatchett in 1801 and first isolated by Christian Wilhelm Blomstrand in 1864. In its elemental form, niobium has a gray metallic appearance. Niobium has the largest magnetic penetration depth of any element and is one of three elemental type-II superconductors (Elemental Niobiumalong with vanadium and technetium). Niobium is found in the minerals pyrochlore, its main commercial source, and columbite. The word Niobium originates from Niobe, daughter of mythical Greek king Tantalus.

TODAY'S TOP DISCOVERY!

April 16, 2024
Los Angeles, CA
Each business day American Elements' scientists & engineers post their choice for the most exciting materials science news of the day
University of Waterloo IQC researchers efficiently produce nearly perfect entangled photon pairs from quantum dot sources

University of Waterloo IQC researchers efficiently produce nearly perfect entangled photon pairs from quantum dot sources