Potassium bis(fluorosulfonyl)imide

CAS #:

Linear Formula:

F2KNO4S2

MDL Number:

MFCD17018950

EC No.:

604-707-0

ORDER

PRODUCT Product Code ORDER SAFETY DATA TECHNICAL DATA
98% Potassium bis(fluorosulfonyl)imide
K-FSI-018-P
Pricing > SDS > Data Sheet >
(2N) 99% Potassium bis(fluorosulfonyl)imide
K-FSI-02-P
Pricing > SDS > Data Sheet >
(3N) 99.9% Potassium bis(fluorosulfonyl)imide
K-FSI-03-P
Pricing > SDS > Data Sheet >
(4N) 99.99% Potassium bis(fluorosulfonyl)imide
K-FSI-04-P
Pricing > SDS > Data Sheet >

Potassium bis(fluorosulfonyl)imide Properties (Theoretical)

Compound Formula F2KNO4S2
Molecular Weight 219.23
Appearance White Powder
Melting Point N/A
Boiling Point N/A
Density N/A
Solubility in H2O N/A
Exact Mass 218.887388
Monoisotopic Mass 218.887388

Potassium bis(fluorosulfonyl)imide Health & Safety Information

Signal Word N/A
Hazard Statements N/A
Hazard Codes N/A
Precautionary Statements P222-P231-P305+P351+P338-P403+P233-P422-P501
Risk Codes N/A
Safety Statements N/A
Transport Information NONH for all modes of transport

View and Print SDS

SAFETY DATA SHEET

Date Accessed: 03/29/2024
Date Revised:01/15/2022

SECTION 1. IDENTIFICATION

Product Name: Potassium bis(fluorosulfonyl)imide

Product Number: All applicable American Elements product codes, e.g. K-FSI-02-P , K-FSI-03-P , K-FSI-04-P , K-FSI-018-P

CAS #: 14984-76-0

Relevant identified uses of the substance: Scientific research and development

Supplier details:
American Elements
10884 Weyburn Ave.
Los Angeles, CA 90024
Tel: +1 310-208-0551
Fax: +1 310-208-0351

Emergency telephone number:
Domestic, North America: +1 800-424-9300
International: +1 703-527-3887


SECTION 2. HAZARDS IDENTIFICATION

· Classification of the substance or mixture
The substance is not classified according to the Globally Harmonized System (GHS).
· Label elements
· GHS label elements not applicable
· Hazard pictograms not applicable
· Signal word not applicable
· Hazard statements not applicable
· Precautionary statements
P231 Handle under inert gas.
P222 Do not allow contact with air.
P305+P351+P338 If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P403+P233 Store in a well-ventilated place. Keep container tightly closed.
P422 Store contents under inert gas.
P501 Dispose of contents/container in accordance with local/regional/national/international
regulations.
Classification system:
· NFPA ratings (scale 0 - 4)
Health = 0
Fire = 0
Reactivity = 0
· HMIS-ratings (scale 0 - 4)
Health = 0
Fire = 0
Reactivity = 0
· Other hazards
· Results of PBT and vPvB assessment
· PBT: Not applicable.


SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS

· Chemical characterization: Substances
· CAS No. Description
14984-76-0 Potassium bis(fluorosulfonyl)imide


SECTION 4. FIRST AID MEASURES

· Description of first aid measures
· General information: No special measures required.
· After inhalation: Supply fresh air; consult doctor in case of complaints.
· After skin contact: Immediately rinse with water.
· After eye contact: Rinse opened eye for several minutes under running water. Then consult a doctor.
· After swallowing: If symptoms persist consult doctor.
· Information for doctor:
· Most important symptoms and effects, both acute and delayed No further relevant information available.
· Indication of any immediate medical attention and special treatment needed
No further relevant information available.


SECTION 5. FIREFIGHTING MEASURES

Extinguishing media
· Suitable extinguishing agents:
CO2, extinguishing powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
· Special hazards arising from the substance or mixture No further relevant information available.
· Advice for firefighters
· Protective equipment: No special measures required.


SECTION 6. ACCIDENTAL RELEASE MEASURES

· Personal precautions, protective equipment and emergency procedures Not required.
· Environmental precautions: No special measures required.
· Methods and material for containment and cleaning up:
Dispose contaminated material as waste according to item 13.
· Reference to other sections
See Section 7 for information on safe handling.
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information.


SECTION 7. HANDLING AND STORAGE

· Handling: Handle under inert gas.
· Precautions for safe handling
No special measures required.
Open and handle receptacle with care.
· Information about protection against explosions and fires: No special measures required.
· Conditions for safe storage, including any incompatibilities
· Storage: Store contents under inert gas.
· Requirements to be met by storerooms and receptacles: No special requirements.
· Information about storage in one common storage facility: Not required.
· Further information about storage conditions: Store in cool, dry conditions in well sealed receptacles.
· Specific end use(s) No further relevant information available.


SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION

· Additional information about design of technical systems: No further data; see item 7.
· Control parameters
· Components with limit values that require monitoring at the workplace: Not required.
· Additional information: The lists that were valid during the creation were used as basis.
· Exposure controls
· Personal protective equipment:
· General protective and hygienic measures:
The usual precautionary measures for handling chemicals should be followed.
· Breathing equipment: Not required.
· Protection of hands:
Protective gloves
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Due to missing tests no recommendation to the glove material can be given for the product/ the
preparation/ the chemical mixture.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
· Material of gloves
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer.
· Penetration time of glove material
The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
· Eye protection: Safety glasses


SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES

Information on basic physical and chemical properties
· General Information
· Appearance:
Form: Powder
Color: White
· Odor: Odorless
· Odor threshold: Not determined.
· pH-value: Not applicable.
· Change in condition
Melting point/Melting range: no data °C
Boiling point/Boiling range: no data °C
Flash point: Not applicable.
· Flammability (solid, gaseous): Product is not flammable
· Ignition temperature:
Decomposition temperature: Not determined.
· Auto igniting: Not determined.
· Danger of explosion: Product does not present an explosion hazard.
· Explosion limits:
Lower: Not determined.
Upper: Not determined.
· Vapor pressure: no data hPa
· Density: Not determined.
· Relative density Not determined.
· Vapor density Not applicable.
· Evaporation rate Not applicable.
· Solubility in / Miscibility with
Water: Insoluble.
· Partition coefficient (n-octanol/water): Not determined.
· Viscosity:
Dynamic: Not applicable.
Kinematic: Not applicable.
· Solvent content:
Organic solvents: 0.0 %
VOC content: 0.0 g/l / 0.00 lb/gl
Solids content: 100.0 %
· Other information No further relevant information available.


SECTION 10. STABILITY AND REACTIVITY

· Reactivity No further relevant information available.
· Chemical stability
· Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.
· Possibility of hazardous reactions No dangerous reactions known.
· Conditions to avoid No further relevant information available.
· Incompatible materials: No further relevant information available.
· Hazardous decomposition products: No dangerous decomposition products known.


SECTION 11. TOXICOLOGICAL INFORMATION

Information on toxicological effects
· Acute toxicity:
· Primary irritant effect:
· on the skin: No irritant effect.
· on the eye: No irritating effect.
· Sensitization: No sensitizing effects known.
Additional toxicological information:
When used and handled according to specifications, the product does not have any harmful effects according to our experience and the information provided to us.
The substance is not subject to classification.
· Carcinogenic categories
· IARC (International Agency for Research on Cancer)
Substance is not listed.
· NTP (National Toxicology Program)
Substance is not listed.
· OSHA-Ca (Occupational Safety & Health Administration)
Substance is not listed.


SECTION 12. ECOLOGICAL INFORMATION

· Toxicity
· Aquatic toxicity: No further relevant information available.
· Persistence and degradability No further relevant information available.
· Behavior in environmental systems:
· Bioaccumulative potential No further relevant information available.
· Mobility in soil No further relevant information available.
· Additional ecological information:
· General notes: Not known to be hazardous to water.
· Results of PBT and vPvB assessment
· PBT: Not applicable.
· vPvB: Not applicable.
· Other adverse effects No further relevant information available.


SECTION 13. DISPOSAL CONSIDERATIONS

· Waste treatment methods
· Recommendation: Disposal must be made according to official regulations.
· Uncleaned packagings:
· Recommendation: Disposal must be made according to official regulations.


SECTION 14. TRANSPORT INFORMATION

· UN-Number
· DOT, ADN, IMDG, IATA not regulated
· UN proper shipping name
· DOT, ADN, IMDG, IATA not regulated
· Transport hazard class(es)
· DOT, ADN, IMDG, IATA
· Class not regulated
· Packing group
· DOT, IMDG, IATA not regulated
· Environmental hazards:
· Marine pollutant: No
· Special precautions for user Not applicable.
· Transport in bulk according to Annex II of
MARPOL73/78 and the IBC Code Not applicable.
· UN "Model Regulation": not regulated


SECTION 15. REGULATORY INFORMATION

Safety, health and environmental regulations/legislation specific for the substance or mixture
· Sara
· Section 355 (extremely hazardous substances):
Substance is not listed.
· Section 313 (Specific toxic chemical listings):
Substance is not listed.
· TSCA (Toxic Substances Control Act):
Substance is not listed.
· Proposition 65
· Chemicals known to cause cancer:
Substance is not listed.
· Chemicals known to cause reproductive toxicity for females:
Substance is not listed.
· Chemicals known to cause reproductive toxicity for males:
Substance is not listed.
· Chemicals known to cause developmental toxicity:
Substance is not listed.
· Carcinogenic categories
· EPA (Environmental Protection Agency)
Substance is not listed.
· TLV (Threshold Limit Value established by ACGIH)
Substance is not listed.
· NIOSH-Ca (National Institute for Occupational Safety and Health)
Substance is not listed.
· GHS label elements not applicable
· Hazard pictograms not applicable
· Signal word not applicable
· Hazard statements not applicable
· Precautionary statements
P231 Handle under inert gas.
P222 Do not allow contact with air.
P305+P351+P338 If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P403+P233 Store in a well-ventilated place. Keep container tightly closed.
P422 Store contents under inert gas.
P501 Dispose of contents/container in accordance with local/regional/national/international
regulations.
· Chemical safety assessment: A Chemical Safety Assessment has not been carried out.


SECTION 16. OTHER INFORMATION

Safety Data Sheet according to Regulation (EC) No. 1907/2006 (REACH). The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any guarantee of the properties of the product. American Elements shall not be held liable for any damage resulting from handling or from contact with the above product. See reverse side of invoice or packing slip for additional terms and conditions of sale. COPYRIGHT 1997-2022 AMERICAN ELEMENTS. LICENSED GRANTED TO MAKE UNLIMITED PAPER COPIES FOR INTERNAL USE ONLY.

About Potassium bis(fluorosulfonyl)imide

Potassium bis(fluorosulfonyl)imide is generally immediately available in most volumes, including bulk quantities. American Elements can produce materials to custom specifications by request, in addition to custom compositions for commercial and research applications and new proprietary technologies. American Elements also casts any of the rare earth metals and most other advanced materials into rod, bar or plate form, as well as numerous other machined shapes and in the form of solutions and organometallic compounds. Ultra high purity and high purity forms also include metal powder, submicron powder and nanomaterials, targets for thin film deposition, and pellets for chemical vapor deposition (CVD) and physical vapor deposition (PVD) applications. American Elements produces to many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia) and follows applicable ASTM testing standards. Typical and custom packaging is available, as is additional technical and safety (MSDS) data. Please contact us for information on lead time and pricing above.

Potassium bis(fluorosulfonyl)imide Synonyms

Bis(fluorosulfonyl)imide potassium salt, potassium bis(fluorosulfonyl)azanide, Imidodisulfuryl fluoride, potassium salt

Chemical Identifiers

Linear Formula F2KNO4S2
MDL Number MFCD17018950
EC No. 604-707-0
Beilstein/Reaxys No. N/A
Pubchem CID 23697682
IUPAC Name potassium; bis(fluorosulfonyl)azanide
SMILES [N-](S(=O)(=O)F)S(=O)(=O)F.[K+]
InchI Identifier InChI=1S/F2NO4S2.K/c1-8(4,5)3-9(2,6)7;/q-1;+1
InchI Key MHEBVKPOSBNNAC-UHFFFAOYSA-N

Packaging Specifications

Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Shipping documentation includes a Certificate of Analysis and Safety Data Sheet (SDS). Solutions are packaged in polypropylene, plastic or glass jars up to palletized 440 gallon liquid totes, and 36,000 lb. tanker trucks.

Related Elements

Potassium

Elemental PotassiumSee more Potassium products. Potassium (atomic symbol: K, atomic number: 19) is a Block S, Group 1, Period 4 element with an atomic weight of 39.0983. The number of electrons in each of Potassium's shells is [2, 8, 8, 1] and its electron configuration is [Ar] 4s1. The potassium atom has a radius of 227.2 pm and a Van der Waals radius of 275 pm. Potassium was discovered and first isolated by Sir Humphrey Davy in 1807. Potassium is the seventh most abundant element on earth. It is one of the most reactive and electropositive of all metals and rapidly oxidizes. As with other alkali metals, potassium decomposes in water with the evolution of hydrogen because of its reacts violently with water, it only occurs in nature in ionic salts.Potassium Bohr Model In its elemental form, potassium has a silvery gray metallic appearance, but its compounds (such as potassium hydroxide) are more frequently used in industrial and chemical applications. The origin of the element's name comes from the English word 'potash,' meaning pot ashes, and the Arabic word qali, which means alkali. The symbol K originates from the Latin word kalium.

Sulfur

See more Sulfur products. Sulfur (or Sulphur) (atomic symbol: S, atomic number: 16) is a Block P, Group 16, Period 3 element with an atomic radius of 32.066. Sulfur Bohr ModelThe number of electrons in each of Sulfur's shells is 2, 8, 6 and its electron configuration is [Ne] 3s2 3p4. In its elemental form, sulfur has a light yellow appearance. The sulfur atom has a covalent radius of 105 pm and a Van der Waals radius of 180 pm. In nature, sulfur can be found in hot springs, meteorites, volcanoes, and as galena, gypsum, and epsom salts. Sulfur has been known since ancient times but was not accepted as an element until 1777, when Antoine Lavoisier helped to convince the scientific community that it was an element and not a compound.

TODAY'S TOP DISCOVERY!

March 29, 2024
Los Angeles, CA
Each business day American Elements' scientists & engineers post their choice for the most exciting materials science news of the day
U.S. DOE scientists convert carbon monoxide into methanol using cascade reaction strategy

U.S. DOE scientists convert carbon monoxide into methanol using cascade reaction strategy