Rhodium Rod
| Product | Product Code |
Order or Specifications |
99% Rhodium Rod |
RH-M-02-R
|
 |
99.9% Rhodium Rod |
RH-M-03-R
|
|
99.99% Rhodium Rod |
RH-M-04-R |
|
99.999% Rhodium Rod |
RH-M-05-R
|
|
American Elements specializes in producing high purity uniform shaped Rhodium Rod with the highest possible density 
and smallest possible average grain sizes for use in semiconductor, Chemical Vapor Deposition (CVD) and Physical Vapor Deposition (PVD) processes including Thermal and Electron Beam (E-Beam) Evaporation, Low Temperature Organic Evaporation, Atomic Layer Deposition (ALD), Metallic-Organic and Chemical Vapor Deposition (MOCVD). Our standard Rod sizes range from 1/8" x 1/8" to 1/4" x 1/4" and 3 mm diameter. We can also provide Rod outside this range and deposition materials for specific applications such as fuel cells and solar energy and for thin film deposition on glass or metal substrates. Materials are produced using crystallization, solid state and other ultra high purification processes such as sublimation. American Elements specializes in producing custom compositions for commercial and research applications and for new proprietary technologies. American Elements casts any of the rare earth metals and most other advanced materials into rod, bar or plate form, as well as other machined shapes and through other processes such as nanoparticles (See also application discussion at Nanotechnology Information and at Quantum Dots) and in the form of solutions and organometallics. We have a variety of standard sized rod molds.. See research below. We also produce Rhodium as powder, ingot, pieces, pellets, disc, granules, wire, and in compound forms, such as oxide. Other shapes are available by request.
and smallest possible average grain sizes for use in semiconductor, Chemical Vapor Deposition (CVD) and Physical Vapor Deposition (PVD) processes including Thermal and Electron Beam (E-Beam) Evaporation, Low Temperature Organic Evaporation, Atomic Layer Deposition (ALD), Metallic-Organic and Chemical Vapor Deposition (MOCVD). Our standard Rod sizes range from 1/8" x 1/8" to 1/4" x 1/4" and 3 mm diameter. We can also provide Rod outside this range and deposition materials for specific applications such as fuel cells and solar energy and for thin film deposition on glass or metal substrates. Materials are produced using crystallization, solid state and other ultra high purification processes such as sublimation. American Elements specializes in producing custom compositions for commercial and research applications and for new proprietary technologies. American Elements casts any of the rare earth metals and most other advanced materials into rod, bar or plate form, as well as other machined shapes and through other processes such as nanoparticles (See also application discussion at Nanotechnology Information and at Quantum Dots) and in the form of solutions and organometallics. We have a variety of standard sized rod molds.. See research below. We also produce Rhodium as powder, ingot, pieces, pellets, disc, granules, wire, and in compound forms, such as oxide. Other shapes are available by request.Rhodium is a Block D, Group 9, Period 5 element. The electronic configuration is [Kr] 4d8 5s1. In its elemental form rhodium's CAS number is 7440-16-6. The rhodium atom has a radius of 134.5.pm and it's Van der Waals radius is 200.pm. Rhodium is a member of the platinum group of metals. It has a higher melting point than platinum, but a lower density. It is alloyed with platinum and palladium in electrodes for spark plugs, advanced laboratory equipment and in thermocouples. Rhodium compounds also have catalytic uses in automotive catalytic converters. Rhodium is used as a plating metal in jewelry production to enhance the whiteness of white gold.
| Formula | CAS No. | Appearance | Molecular Weight |
| Rh | 7440-16-6 | Gray | 102.91 |
| PRODUCT CATALOG | Submicron & Nanopowder | Tolling | Ultra High Purity | Sputtering Target | Crystal Growth | Rod, Plate, Powder, etc. |
© 2001-2008. American Elements is a U.S. Registered Trademark. All rights reserved.
This website and all pages, designs, concepts, logos, and color schemes herein are
the copyrighted proprietary rights and intellectual property of American Elements.
This website and all pages, designs, concepts, logos, and color schemes herein are
the copyrighted proprietary rights and intellectual property of American Elements.
|
Recent Research & Development for Rhodium
|
| American Elements Products can also be sourced at these sites: | |||||||
 |
 |
 |
 |
 |
 |
 |
|
 |
 |
 |
 |
 |
 |
 |
|
 |
 |
 |
 |
 |
 |
 |
|
 |
 |
 |
electronics-ee.com |  |
 |
 |
|
 |
 |
 |
 |
 |
 |
 |
|
 |
 |
 |
 |
 |
 |
 |
|
 |
 |
 |
 |
 |
 |
 |
|