American Elements specializes in producing high purity uniform shaped Tin Oxide Pellets with the highest possible density and smallest possible average grain sizes for use in semiconductor, Chemical Vapor Deposition (CVD) and Physical Vapor Deposition (PVD) processes including Thermal and Electron Beam (E-Beam) Evaporation, Low Temperature Organic Evaporation, Atomic Layer Deposition (ALD), Metallic-Organic and Chemical Vapor Deposition (MOCVD). Our standard Pellet sizes range from 1/8" x 1/8" to 1/4" x 1/4" and 3 mm diameter. We can also provide Pellets outside this range for ultra high puritythin film applications, such as fuel cells and solar energy layers. Materials are produced using crystallization, solid state and other ultra high purification processes such as sublimation. American Elements specializes in producing custom compositions for commercial and research applications and for new proprietary technologies. American Elements also casts any of the rare earth metals and most other advanced materials into rod, bar or plate form, as well as other machined shapes and through other processes such as nanoparticles (See also application discussion at Nanotechnology Information and at Quantum Dots) and in the form of solutions and organometallics. We also produce Tin Oxide as pieces,tablets, powder, and sputtering target. Oxide compounds are not conductive to electricity. See research below. Other shapes are available by request.
Tin is a Block P, Group 14, Period 5 element. The number of electrons in each of Tin's shells is 2, 8, 18, 18, 4 and its electronic configuration is [Kr] 4d10 5s2 5p2. In its elemental form tin's CAS number is 7440-31-5. The tin atom has a radius of 140.5.pm and it's Van der Waals radius is 217.pm. Organometallic compounds of tin are very toxic and tin salts are also considered to be toxic. Tin as single atoms or molecules are not toxic. Tin compounds sprayed onto glass are used to produce electrically conductive coatings. These have been used for panel lighting and for frost-free windshields. Most window glass is now made by floating molten glass on molten tin (float glass) to produce a flat surface. Crystalline tin-niobium alloy is superconductive at very low temperatures. This promises to be important in the construction of superconductive magnets that generate enormous field strengths but use practically no power. Tin is the basis for many eutectic alloys and the discovery by early man that copper could be better formed and crafted if tin were added producing the first bronze and launching what we refer to as the "Bronze Age" and the first Neolithic metal tools, cooking utensils, and jewelry produced from rudimentary bronze. An important tin compound is the chloride, which is used as a reducing agent and as a mordant in calico printing. Tin is also used in various metal alloys (See AE Alloys). Tin was first discovered by Early Man.The origin of the word tin comes from the Latin word Stannum which translates to the Anglo-Saxon word tin.
See Tin research below.
PACKAGING SPECIFICATIONS FOR BULK & RESEARCH QUANTITIES
Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Shipping documentation includes a Certificate of Analysis and Material Safety Data Sheet (MSDS). Solutions are packaged in polypropylene, plastic or glass jars up to palletized 440 gallon liquid totes.
RECONSTRUCTION OF THE THUMB WITH A MODIFIED WRAP-AROUND FLAP IN A PATIENT SUFFERING FROM ?-THALASSEMIA MINOR.
Galeano M, Checcucci G, Ceruso M.
Hand Surg. 2011;16(3):361-5.
PMID:
22072476
[PubMed - in process]
Isolated complete volar dislocation of the capitate: a case report.
Checcucci G, Bigazzi P, Zucchini M, Ceruso M.
Hand Surg. 2011;16(3):353-6.
PMID:
22072474
[PubMed - in process]
Dielectrophoretic chip with multilayer electrodes and micro-cavity array for trapping and programmably releasing single cells.
Chuang CH, Huang YW, Wu YT.
Biomed Microdevices. 2011 Nov 10. [Epub ahead of print]
PMID:
22072154
[PubMed - as supplied by publisher]
Structures of medium sized tin cluster anions.
Wiesel A, Drebov N, Rapps T, Ahlrichs R, Schwarz U, Kelting R, Weis P, Kappes MM, Schooss D.
Phys Chem Chem Phys. 2011 Nov 9. [Epub ahead of print]
PMID:
22071636
[PubMed - as supplied by publisher]
Discrimination task reveals differences in neural bases of tinnitus and hearing impairment.
Husain FT, Pajor NM, Smith JF, Kim HJ, Rudy S, Zalewski C, Brewer C, Horwitz B.
PLoS One. 2011;6(10):e26639. Epub 2011 Oct 31.
PMID:
22066003
[PubMed - in process]
A suggested technique for the application of the cone beam computed tomography periapical index.
Esposito S, Cardaropoli M, Cotti E.
Dentomaxillofac Radiol. 2011 Dec;40(8):506-12.
PMID:
22065800
[PubMed - in process]
(4-Chloro-3-nitro-benzoato)triphenyl-tin(IV).
Win YF, Choong CS, Teoh SG, Quah CK, Fun HK.
Acta Crystallogr E Struct Rep Online. 2011 Sep 1;67(Pt 9):m1270-1. Epub 2011 Aug 27.
PMID:
22065496
[PubMed]
Bis{2-[(E)-(5-tert-butyl-2-hy-droxy-phen-yl)diazen-yl]benzoato}dimethyl-tin(IV).
Basu Baul TS, Paul A, Tiekink ER.
Acta Crystallogr E Struct Rep Online. 2011 Oct 1;67(Pt 10):m1383-4. Epub 2011 Sep 14.
PMID:
22065466
[PubMed]
catena-Poly[[triphenyl-tin(IV)]-?-5-amino-2-nitro-benzoato-?O:O].
Win YF, Choong CS, Teoh SG, Quah CK, Fun HK.
Acta Crystallogr E Struct Rep Online. 2011 Sep 1;67(Pt 9):m1276-7. Epub 2011 Aug 27.
PMID:
22064934
[PubMed]
Dual detection strategy for electrochemical analysis of glucose and nitrite using a partitionally modified electrode.
Wang J, Diao P, Zhang Q.
Analyst. 2011 Nov 7. [Epub ahead of print]
PMID:
22064849
[PubMed - as supplied by publisher]
fac-(2-Amido-ethyl-?C,O)trichlorido(urea-?O)tin(IV).
Howie RA, de Lima GM, Tiekink ER, Wardell JL, Wardell SM.
Acta Crystallogr E Struct Rep Online. 2011 Oct 1;67(Pt 10):m1420-1. Epub 2011 Sep 30.
PMID:
22064619
[PubMed]
Highly sensitive nonenzymatic glucose sensor based on electrospun copper oxide-doped nickel oxide composite microfibers.
Cao F, Guo S, Ma H, Yang G, Yang S, Gong J.
Talanta. 2011 Oct 30;86:214-20. Epub 2011 Sep 8.
PMID:
22063533
[PubMed - in process]
Cross-Linked Perylene Diimide-Based n-Type Interfacial Layer for Inverted Organic Photovoltaic Devices.
Hains AW, Chen HY, Reilly TH, Gregg BA.
ACS Appl Mater Interfaces. 2011 Nov 7. [Epub ahead of print]
PMID:
22059439
[PubMed - as supplied by publisher]
Bis-(chloro-acetato-?O)bis(trimethyl-silylmethyl)tin(IV).
Ding RF, Wang QB.
Acta Crystallogr E Struct Rep Online. 2011 Sep 1;67(Pt 9):m1190. Epub 2011 Aug 2.
PMID:
22058841
[PubMed]
A new langbeinite-type phosphate: K(2)AlSn(PO(4))(3).
Li HY, Zhao D.
Acta Crystallogr E Struct Rep Online. 2011 Oct 1;67(Pt 10):i56. Epub 2011 Sep 20.
PMID:
22058680
[PubMed]
Enhanced resistance of yeast mutants deficient in low-affinity iron and zinc transporters to stannous-induced toxicity.
Viau CM, Cardone JM, Guecheva TN, Yoneama ML, Dias JF, Pungartnik C, Brendel M, Saffi J, Henriques JA.
Chemosphere. 2011 Nov 2. [Epub ahead of print]
PMID:
22055569
[PubMed - as supplied by publisher]
Allylsilanes in "Tin-free" Oximation, Alkenylation, and Allylation of Alkyl Halides.
Rouquet G, Robert F, Méreau R, Castet F, Landais Y.
Chemistry. 2011 Nov 3. doi: 10.1002/chem.201101842. [Epub ahead of print]
PMID:
22052660
[PubMed - as supplied by publisher]
Surface Modification of Indium-Tin-Oxide Via Self-Assembly of a Donor-Acceptor Complex: A Density Functional Theory Study.
Li H, Winget P, Bredas JL.
Adv Mater. 2011 Nov 3. doi: 10.1002/adma.201103009. [Epub ahead of print] No abstract available.
PMID:
22052626
[PubMed - as supplied by publisher]
Minimally invasive video-assisted cardiac surgery: operative techniques, application fields and clinical outcomes.
Vistarini N, Aiello M, Viganň M.
Future Cardiol. 2011 Nov;7(6):775-87.
PMID:
22050064
[PubMed - in process]
American Elements specializes in producing high purity uniform shaped Tin Oxide Pellets with the highest possible density 
and smallest possible average grain sizes for use in semiconductor, Chemical Vapor Deposition (CVD) and Physical Vapor Deposition (PVD) processes including Thermal and Electron Beam (E-Beam) Evaporation, Low Temperature Organic Evaporation, Atomic Layer Deposition (ALD), Metallic-Organic and Chemical Vapor Deposition (MOCVD). Our standard Pellet sizes range from 1/8" x 1/8" to 1/4" x 1/4" and 3 mm diameter. We can also provide Pellets outside this range for ultra high purity thin film applications, such as fuel cells and solar energy layers. Materials are produced using crystallization, solid state and other ultra high purification processes such as sublimation. American Elements specializes in producing custom compositions for commercial and research applications and for new proprietary technologies. American Elements also casts any of the rare earth metals and most other advanced materials into rod, bar or plate form, as well as other machined shapes and through other processes such as nanoparticles (See also application discussion at Nanotechnology Information and at Quantum Dots) and in the form of solutions and organometallics. We also produce Tin Oxide as pieces,tablets, powder, and sputtering target. Oxide compounds are not conductive to electricity. See research below. Other shapes are available by request. 
Tin is a Block P, Group 14, Period 5 element. The number of electrons in each of Tin's shells is 2, 8, 18, 18, 4 and its electronic configuration is [Kr] 4d10 5s2 5p2. In its elemental form tin's CAS number is 7440-31-5. The tin atom has a radius of 140.5.pm and it's Van der Waals radius is 217.pm. Organometallic compounds of tin are very toxic and tin salts are also considered to be toxic. Tin as single atoms or molecules are not toxic. Tin compounds sprayed onto glass are used to produce electrically conductive coatings. These have been used for panel lighting and for frost-free windshields. Most window glass is now made by floating molten glass on molten tin (float glass) to produce a flat surface. Crystalline tin-niobium alloy is superconductive at very low temperatures. This 
promises to be important in the construction of superconductive magnets 
that generate enormous field strengths but use practically no power. Tin is the basis for many eutectic alloys and the discovery by early man that copper could be better formed and crafted if tin were added producing the first bronze and launching what we refer to as the "Bronze Age" and the first Neolithic metal tools, cooking utensils, and jewelry produced from rudimentary bronze. An important tin compound is the chloride, which is used as a reducing agent and as a mordant in calico printing. Tin is also used in various metal alloys (See AE Alloys). Tin was first discovered by Early Man.The origin of the word tin comes from the Latin word Stannum which translates to the Anglo-Saxon word tin.
See Tin research below.
