| Product | Product Code | Order or Specifications |
| (2N) 99% Strontium Telluride Sputtering Target | SR-TE-02-ST |
 |
| (2N5) 99.5% Strontium Telluride Sputtering Target | SR-TE-025-ST |
|
| (3N) 99.9% Strontium Telluride Sputtering Target | SR-TE-03-ST |
|
| (3N5) 99.95% Strontium Telluride Sputtering Target | SR-TE-035-ST |
|
| (4N) 99.99% Strontium Telluride Sputtering Target | SR-TE-04-ST |
|
| (5N) 99.999% Strontium Telluride Sputtering Target | SR-TE-05-ST |
|
American Elements produces to many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopeia/British Pharmacopeia) and follows applicable ASTM testing standards.See safety data and research below and pricing/lead time above. American Elements specializes in producing high purity Strontium Telluride Sputtering targets with the highest possible density 
and smallest possible average grain sizes for use in semiconductor, chemical vapor deposition (CVD) and physical vapor deposition (PVD) display and optical applications. Our standard Sputtering Targets for thin film are available monoblock or bonded with dimensions and configurations up to 820 mm with hole drill locations and threading, beveling, grooves and backing designed to work with both older sputtering devises as well as the latest process equipment, such as large area coating for solar energy or fuel cells and flip-chip applications. Research sized targets are also produced as well as custom sizes and alloys. All targets are analyzed using best demonstrated techniques including X-Ray Fluorescence (XRF), Glow Discharge Mass Spectrometry (GDMS), and Inductively Coupled Plasma (ICP). "Sputtering" allows for thin film deposition of an ultra high purity sputtering metallic or oxide material onto another solid substrate by the controlled removal and conversion of the target material into a directed gaseous/plasma phase through ionic bombardment. "Sputtering" allows for thin film deposition of an ultra high purity sputtering metallic or oxide material onto another solid substrate by the controlled removal and conversion of the target material into a directed gaseous/plasma phase through ionic bombardment. We can also provide targets outside this range in addition to just about any size rectangular, annular, or oval target. Materials are produced using crystallization, solid state and other ultra high purification processes such as sublimation. American Elements specializes in producing custom compositions for commercial and research applications and for new proprietary technologies. American Elements also casts any of the rare earth metals and most other advanced materials into rod, bar or plate form, as well as other machined shapes and through other processes nanoparticles. We also produce Strontium as disc, granules, ingot, pellets, pieces, powder, and rod. Other shapes are available by request.
Strontium is a Block S, Group 2, Period 5 element. The number of electrons in each of Strontium's shells is 2, 8, 18, 8, 2 and its electronic configuration is [Kr] 5s2. In its elemental form strontium's CAS number is 7440-24-6. The strontium atom has a radius of 215.1.pm and it's Van der Waals radius is 200.pm. The non-radioactive isotopes of Strontium are not toxic. Strontium has low tech applications as an additive to flares and pyrotechnics because of the bright crimson flame
produced by its salts. Strontium is available as metal and compounds with purities from 99% to 99.999% (ACS grade to ultra-high purity); metals in the form of foil, sputtering target, and rod, and compounds as submicron and nanopowder. It also has many high technology applications because of its high refractive index as a titanate in glass, as a "getter" in 
electron tubes and as a dopant for numerous perovskite formulations to produce cathodes for oxygen generation or solid oxide fuel cells. Historically the primary use of strontium was to produce CRT glass for color television and computer tubes. Strontium was first discovered by A. Crawford in 1790. Strontium was named after the Scottish town it was discovered in, Strontian. See Strontium research below.
Tellurium is a Block P, Group 16, Period 5 element. The number of electrons in each of Tellurium's shells is 2, 8, 18, 18, 6 and its electronic configuration is [Kr] 4d10 5s2 5p4. In its elemental form tellurium's CAS number is 13494-80-9. The tellurium atom has a radius of 143.2.pm and it's Van der Waals radius is 206.pm. Tellurium is a p-type semiconductor, and shows greater conductivity in certain directions, depending on alignment of the atoms. It is grown in crystalline form with other elements such as indium telluride. Its conductivity increases slightly with exposure to light which makes many tellurides candidates for solar energyapplications. Tellurium improves the machinability of copper and stainless steel, and its addition to lead decreases the corrosive action of sulfuric acid on lead and improves its strength and hardness. 
Tellurium is used as 
a basic ingredient in blasting caps, and is added to cast iron for chill control. Tellurium is used in ceramics. Bismuth telluride has been used in thermoelectric devices. Iron is available as metal and compounds with purities from 99% to 99.999% (ACS grade to ultra-high purity); metals in the form of foil, sputtering target, and rod, and compounds as submicron and nanopowder. Tellurium was first discovered by Franz Muller von Reichenstein in 1782. The name Tellurium originates from the Greek word 'Tellus' meaning Earth. See Tellurium research below.
| PRODUCT CATALOG | News | Foil | Submicron & Nanopowder | Tolling | Ultra High Purity | Sputtering Target | Crystal Growth | Rod, Plate, Powder, etc. | Home |
 |
 |
|---|
|
Search by Material, Product Name, Product Code, CAS Number, Formula, Element, Anion, Form, EC Number, MDL Number or PubChem ID. |
Recent Research & Development for Tellurium
|
| American Elements is a copyrighted U.S. Trademark. All rights reserved. |
|---|