Terbium Wire
| Product | Product Code |
Order or Specifications |
99%
Terbium Wire |
TB-M-02-W
|
 |
99.9%
Terbium Wire |
TB-M-03-W
|
|
99.99% Terbium Wire |
TB-M-04-W
|
|
99.999% Terbium Wire |
TB-M-05-W
|
|
American Elements specializes in producing high purity uniform shaped Terbium Wire with the highest possible density 
for use in semiconductor, Chemical Vapor Deposition (CVD) and Physical Vapor Deposition (PVD) processes including Thermal and Electron Beam (E-Beam) Evaporation, Low Temperature Organic Evaporation, Atomic Layer Deposition (ALD), Metallic-Organic and Chemical Vapor Deposition (MOCVD). Our standard Metal Wire sizes range from 0.75 mm to 1 mm to 2 mm diameter with strict tolerances (See ASTM requirements) and alpha values (conductive resistance) for uses such as gas detection and thermometry tolerances (Also see Nanoparticles) . Please contact us to fabricate custom wire alloys and gauge sizes. Materials are produced using crystallization, solid state and other ultra high purification processes such as sublimation. American Elements specializes in producing custom compositions for commercial and research applications and for new proprietary technologies. American Elements also casts any of the rare earth metals and most other advanced materials into rod, bar or plate form, as well as other machined shapes and through other processes such as nanoparticles (See also application discussion at Nanotechnology Information and at Quantum Dots) and in the form of solutions and organometallics. We can also provide Rod outside this range. See safety data and research below. We also produce Terbium as powder, ingot, pieces, pellets, disc, granules and in compound forms, such as oxide. Other shapes are available by request.
for use in semiconductor, Chemical Vapor Deposition (CVD) and Physical Vapor Deposition (PVD) processes including Thermal and Electron Beam (E-Beam) Evaporation, Low Temperature Organic Evaporation, Atomic Layer Deposition (ALD), Metallic-Organic and Chemical Vapor Deposition (MOCVD). Our standard Metal Wire sizes range from 0.75 mm to 1 mm to 2 mm diameter with strict tolerances (See ASTM requirements) and alpha values (conductive resistance) for uses such as gas detection and thermometry tolerances (Also see Nanoparticles) . Please contact us to fabricate custom wire alloys and gauge sizes. Materials are produced using crystallization, solid state and other ultra high purification processes such as sublimation. American Elements specializes in producing custom compositions for commercial and research applications and for new proprietary technologies. American Elements also casts any of the rare earth metals and most other advanced materials into rod, bar or plate form, as well as other machined shapes and through other processes such as nanoparticles (See also application discussion at Nanotechnology Information and at Quantum Dots) and in the form of solutions and organometallics. We can also provide Rod outside this range. See safety data and research below. We also produce Terbium as powder, ingot, pieces, pellets, disc, granules and in compound forms, such as oxide. Other shapes are available by request. Terbium is a Block F, Group 3, Period 6 element. The electronic configuration is [Xe]4f96s2. In its elemental form terbium's CAS number is 7440-27-9. The terbium atom has a radius of 176.3.pm and it's Van der Waals radius is unknown. Terbium is primarily used in phosphors, particularly in fluorescent lamps and as the high intensity green emitter used in projection televisions, such as the yttrium-aluminum-garnet (Tb:YAG) variety. Terbium is available as metal and compounds with purities from 99% to 99.999% (ACS grade to ultra-high purity); metals in the form of foil, sputtering target, and rod, and compounds as submicron and nanopowder.
| Formula | CAS No. | Appearance | Molecular Weight |
| Tb | 7440-27-9 | Silvery | 158.93 |
| PRODUCT CATALOG | Submicron & Nanopowder | Tolling | Ultra High Purity | Sputtering Target | Crystal Growth | Rod, Plate, Powder, etc. |
© 2001-2008. American Elements is a U.S. Registered Trademark. All rights reserved.
This website and all pages, designs, concepts, logos, and color schemes herein are
the copyrighted proprietary rights and intellectual property of American Elements.
This website and all pages, designs, concepts, logos, and color schemes herein are
the copyrighted proprietary rights and intellectual property of American Elements.
|
Recent Research & Development for Terbium
|
| American Elements Products can also be sourced at these sites: | |||||||
 |
 |
 |
 |
 |
 |
 |
|
 |
 |
 |
 |
 |
 |
 |
|
 |
 |
 |
 |
 |
 |
 |
|
 |
 |
 |
electronics-ee.com |  |
 |
 |
|
 |
 |
 |
 |
 |
 |
 |
|
 |
 |
 |
 |
 |
 |
 |
|
 |
 |
 |
 |
 |
 |
 |
|