American Elements specializes in producing high purity uniform shaped Tellurium Rod with the highest possible density and smallest possible average grain sizes for use in semiconductor, Chemical Vapor Deposition (CVD) and Physical Vapor Deposition (PVD) processes including Thermal and Electron Beam (E-Beam) Evaporation, Low Temperature Organic Evaporation, Atomic Layer Deposition (ALD), Metallic-Organic and Chemical Vapor Deposition (MOCVD). Our standard Rod sizes range from 1/8" x 1/8" to 1/4" x 1/4" and 3 mm diameter. We can also provide Rod outside this range and deposition materials for specific applications such as fuel cells and solar energy and for thin film deposition on glass or metal substrates. Materials are produced using crystallization, solid state and other ultra high purification processes such as sublimation. American Elements specializes in producing custom compositions for commercial and research applications and for new proprietary technologies. American Elements casts any of the rare earth metals and most other advanced materials into rod, bar or plate form, as well as other machined shapes and through other processes such as nanoparticles (See also application discussion at Nanotechnology Information and at Quantum Dots) and in the form of solutions and organometallics. We have a variety of standard sized rod molds..American Elements produces to many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia)and follows applicable ASTM testing standards.Typical and custom packaging is available. See safety data and research below and pricing/lead time above. We also produce Tellurium as powder, ingot, pieces, pellets, disc, granules, wire, and in compound forms, such as oxide. Other shapes are available by request.
Tellurium is a Block P, Group 16, Period 5 element. The number of electrons in each of Tellurium's shells is 2, 8, 18, 18, 6 and its electronic configuration is [Kr] 4d10 5s2 5p4. In its elemental form tellurium's CAS number is 13494-80-9. The tellurium atom has a radius of 143.2.pm and it's Van der Waals radius is 206.pm. Tellurium is a p-type semiconductor, and shows greater conductivity in certain directions, depending on alignment of the atoms. It is grown in crystalline form with other elements such as indium telluride. Its conductivity increases slightly with exposure to light which makes many tellurides candidates for solar energyapplications. Tellurium improves the machinability of copper and stainless steel, and its addition to lead decreases the corrosive action of sulfuric acid on lead and improves its strength and hardness. Tellurium is used as a basic ingredient in blasting caps, and is added to cast iron for chill control. Tellurium is used in ceramics. Bismuth telluride has been used in thermoelectric devices. Iron is available as metal and compounds with purities from 99% to 99.999% (ACS grade to ultra-high purity); metals in the form of foil, sputtering target, and rod, and compounds as submicron and nanopowder. Tellurium was first discovered by Franz Muller von Reichenstein in 1782. The name Tellurium originates from the Greek word 'Tellus' meaning Earth. See Tellurium research below.
PACKAGING SPECIFICATIONS FOR BULK & RESEARCH QUANTITIES
Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Shipping documentation includes a Certificate of Analysis and Material Safety Data Sheet (MSDS). Bullion and bar forms are best if purchasing solely for physical possession and risk exposure.
Multi-metal(loid) methylation in methanoarchaea is linked to central intermediates of methanogenesis.
Thomas F, Diaz-Bone RA, Wuerfel O, Huber B, Weidenbach K, Schmitz RA, Hensel R.
Appl Environ Microbiol. 2011 Oct 14. [Epub ahead of print]
PMID:
22003009
[PubMed - as supplied by publisher]
Synthesis, structure, and bonding of orthorhombic r(5)au(2)te(2) (R = lu, ho, dy, y). Electronic structure of the binary parent valence compound eu(5)as(4).
Chai P, Corbett JD.
Inorg Chem. 2011 Nov 7;50(21):10949-55. Epub 2011 Oct 12.
PMID:
21991925
[PubMed - in process]
Glucose-6-Phosphate Dehydrogenase Protects Escherichia coli from Tellurite-Mediated Oxidative Stress.
Sandoval JM, Arenas FA, Vásquez CC.
PLoS One. 2011;6(9):e25573. Epub 2011 Sep 30.
PMID:
21984934
[PubMed - in process]
Microbial processing of tellurium as a tool in biotechnology.
Turner RJ, Borghese R, Zannoni D.
Biotechnol Adv. 2011 Sep 1. [Epub ahead of print]
PMID:
21907273
[PubMed - as supplied by publisher]
Measurement of the ?? Decay Half-Life of ^{130}Te with the NEMO-3 Detector.
Arnold R, Augier C, Baker J, Barabash AS, Basharina-Freshville A, Blondel S, Bongrand M, Broudin-Bay G, Brudanin V, Caffrey AJ, Chapon A, Chauveau E, Durand D, Egorov V, Flack R, Garrido X, Grozier J, Guillon B, Hubert P, Hugon C, Jackson CM, Jullian S, Kauer M, Klimenko A, Kochetov O, Konovalov SI, Kovalenko V, Lalanne D, Lamhamdi T, Lang K, Liptak Z, Lutter G, Mamedov F, Marquet Ch, Martin-Albo J, Mauger F, Mott J, Nachab A, Nemchenok I, Nguyen CH, Nova F, Novella P, Ohsumi H, Pahlka RB, Perrot F, Piquemal F, Reyss JL, Richards B, Ricol JS, Saakyan R, Sarazin X, Simard L, Simkovic F, Shitov Y, Smolnikov A, Söldner-Rembold S, Stekl I, Suhonen J, Sutton CS, Szklarz G, Thomas J, Timkin V, Torre S, Tretyak VI, Umatov V, Vála L, Vanyushin I, Vasiliev V, Vorobel V, Vylov Ts, Zukauskas A; NEMO-3 Collaboration.
Phys Rev Lett. 2011 Aug 5;107(6):062504. Epub 2011 Aug 4.
PMID:
21902318
[PubMed - in process]
Synthesis and characterization of wurtzite ZnTe nanorods with controllable aspect ratios.
Zhang J, Jin S, Fry HC, Peng S, Shevchenko E, Wiederrecht GP, Rajh T.
J Am Chem Soc. 2011 Oct 5;133(39):15324-7. Epub 2011 Sep 12.
PMID:
21899348
[PubMed - in process]
A homometallic tricapped cubane cluster: [(Cp*Mo)4B4H4(?4-BH)3] (Cp* = ?5-C5Me5).
Thakur A, Sahoo S, Ghosh S.
Inorg Chem. 2011 Sep 5;50(17):7940-2. Epub 2011 Aug 11.
PMID:
21834507
[PubMed - in process]
Selective antimicrobial activity associated with sulfur nanoparticles.
Schneider T, Baldauf A, Ba LA, Jamier V, Khairan K, Sarakbi MB, Reum N, Schneider M, Röseler A, Becker K, Burkholz T, Winyard PG, Kelkel M, Diederich M, Jacob C.
J Biomed Nanotechnol. 2011 Jun;7(3):395-405.
PMID:
21830480
[PubMed - indexed for MEDLINE]
Bioactivity of the conjugation of green-emitting CdTe quantum dots with a carborane complex.
Wu C, Shi L, Li Q, Zhao J, Selke M, Yan H, Wang X.
J Nanosci Nanotechnol. 2011 Apr;11(4):3091-9.
PMID:
21776675
[PubMed - indexed for MEDLINE]
Isolation and characterization of an environmental cadmium- and tellurite-resistant Pseudomonas strain.
Chien CC, Jiang MH, Tsai MR, Chien CC.
Environ Toxicol Chem. 2011 Oct;30(10):2202-7. doi: 10.1002/etc.620. Epub 2011 Aug 10.
PMID:
21766319
[PubMed - in process]
An ultrasensitive hydrogen peroxide biosensor based on electrocatalytic synergy of graphene-gold nanocomposite, CdTe-CdS core-shell quantum dots and gold nanoparticles.
Gu Z, Yang S, Li Z, Sun X, Wang G, Fang Y, Liu J.
Anal Chim Acta. 2011 Sep 2;701(1):75-80. Epub 2011 Jul 4.
PMID:
21763811
[PubMed - indexed for MEDLINE]
Synchronous determination of mercury (II) and copper (II) based on quantum dots-multilayer film.
Ma Q, Ha E, Yang F, Su X.
Anal Chim Acta. 2011 Sep 2;701(1):60-5. Epub 2011 Jun 17.
PMID:
21763809
[PubMed - indexed for MEDLINE]
Procedure-Controlled Selective Synthesis of 5-Acyl-2-iminothiazolines and their Selenium and Tellurium Derivatives by Convergent Tandem Annulation.
Wang Y, Zhang WX, Wang Z, Xi Z.
Angew Chem Int Ed Engl. 2011 Jul 14. doi: 10.1002/anie.201101948. [Epub ahead of print] No abstract available.
PMID:
21761522
[PubMed - as supplied by publisher]
Synthesis, structures and ab initio studies of selenium and tellurium bis(carbodithioates and carbothioates).
Kato S, Tani K, Ishida M, Nonogaki J, Ebihara M, Hayashi S, Nakanishi W, Niyomura O, Ando F, Koketsu J.
Dalton Trans. 2011 Aug 28;40(32):8156-69. Epub 2011 Jul 13.
PMID:
21750832
[PubMed - in process]
Electrical bistability in self-assembled hybrid multilayers of phospholipid and nanoparticles.
Yuan B, Hu SX, Lu NY, Xu F, Zhou K, Ma YQ, Li M.
Nanotechnology. 2011 Aug 5;22(31):315303. Epub 2011 Jul 12.
PMID:
21747161
[PubMed - indexed for MEDLINE]
Organomercury(II) and tellurium(II) compounds with the "pincer" ligand 2,6-[O(CH2CH2)2NCH2]2C6H3--stabilization of an unusual organotellurium(II) cationic species.
Beleaga A, Bojan VR, Pöllnitz A, Rat CI, Silvestru C.
Dalton Trans. 2011 Sep 21;40(35):8830-8. Epub 2011 Jul 11.
PMID:
21743935
[PubMed - in process]
Differentiation between the motor and sensory fascicles of the peripheral nerves from adult rats using annexin V-CdTe-conjugated polymer.
Meng X, Lu L, Wang H, Liu B.
Neurol India. 2011 May-Jun;59(3):333-8.
PMID:
21743158
[PubMed - indexed for MEDLINE]
Tellurium tetrachloride and diphenyl ditelluride cause cytotoxicity in rat hippocampal astrocytes.
Roy S, Hardej D.
Food Chem Toxicol. 2011 Oct;49(10):2564-74. Epub 2011 Jul 1.
PMID:
21742007
[PubMed - in process]
and smallest possible average grain sizes for use in semiconductor, Chemical Vapor Deposition (CVD) and Physical Vapor Deposition (PVD) processes including Thermal and Electron Beam (E-Beam) Evaporation, Low Temperature Organic Evaporation, Atomic Layer Deposition (ALD), Metallic-Organic and Chemical Vapor Deposition (MOCVD). Our standard Rod sizes range from 1/8" x 1/8" to 1/4" x 1/4" and 3 mm diameter. We can also provide Rod outside this range and deposition materials for specific applications such as fuel cells and solar energy and for thin film deposition on glass or metal substrates. Materials are produced using crystallization, solid state and other ultra high purification processes such as sublimation. American Elements specializes in producing custom compositions for commercial and research applications and for new proprietary technologies. American Elements casts any of the rare earth metals and most other advanced materials into rod, bar or plate form, as well as other machined shapes and through other processes such as nanoparticles (See also application discussion at Nanotechnology Information and at Quantum Dots) and in the form of solutions and organometallics. We have a variety of standard sized rod molds..American Elements produces to many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia)and follows applicable ASTM testing standards.Typical and custom packaging is available. See safety data and research below and pricing/lead time above. We also produce Tellurium as powder, ingot, pieces, pellets, disc, granules, wire, and in compound forms, such as oxide. Other shapes are available by request. 
Tellurium is a Block P, Group 16, Period 5 element. The number of electrons in each of Tellurium's shells is 2, 8, 18, 18, 6 and its electronic configuration is [Kr] 4d10 5s2 5p4. In its elemental form tellurium's CAS number is 13494-80-9. The tellurium atom has a radius of 143.2.pm and it's Van der Waals radius is 206.pm. Tellurium is a p-type semiconductor, and shows greater conductivity in certain directions, depending on alignment of the atoms. It is grown in crystalline form with other elements such as indium telluride. Its conductivity increases slightly with exposure to light which makes many tellurides candidates for solar energyapplications. Tellurium improves the machinability of copper and stainless steel, and its addition to lead decreases the corrosive action of sulfuric acid on lead and improves its strength and hardness. 
Tellurium is used as 
a basic ingredient in blasting caps, and is added to cast iron for chill control. Tellurium is used in ceramics. Bismuth telluride has been used in thermoelectric devices. Iron is available as metal and compounds with purities from 99% to 99.999% (ACS grade to ultra-high purity); metals in the form of foil, sputtering target, and rod, and compounds as submicron and nanopowder. Tellurium was first discovered by Franz Muller von Reichenstein in 1782. The name Tellurium originates from the Greek word 'Tellus' meaning Earth. See Tellurium research below.
