American Elements specializes in producing high purity uniform shaped Thulium Slugs with the highest possible density  and smallest possible average grain sizes for use in semiconductor, Chemical Vapor Deposition (CVD) and Physical Vapor Deposition (PVD) processes including Thermal and Electron Beam (E-Beam) Evaporation, Low Temperature Organic Evaporation, Atomic Layer Deposition (ALD), Metallic-Organic and Chemical Vapor Deposition (MOCVD). Our standard Slug sizes range from 1/8" x 1/8" to 1/4" x 1/4" and 3 mm diameter. We can also provide Slugs outside this range for ultra high purity thin film applications, such as fuel cells and solar energy layers. Materials are produced using crystallization, solid state and other ultra high purification processes such as sublimation. American Elements specializes in producing custom compositions for commercial and research applications and for new proprietary technologies. American Elements also casts any of the rare earth metals and most other advanced materials into rod, bar or plate form, as well as other machined shapes and through other processes nanoparticles. We also produce Thulium as rod, ingot, powder, pieces, disc, granules, wire, and in compound forms, such as oxide. Other shapes are available by request.  Thulium is a Block F, Group 3, Period 6 element. The number of electrons in each of Thulium's shells is 2, 8, 18, 31, 8, 2 and its electronic configuration is [Xe]4f136s2. In its elemental form thulium's CAS number is 7440-30-4. The thulium atom has a radius of 172.4.pm and it's Van der Waals radius is unknown. Thulium is not toxic. Thulium is representative of the other lanthanides (rare earths) similar in chemistry to Yttrium. Thulium is available as metal and compounds with purities from 99% to 99.999% (ACS grade to ultra-high purity); metals in the form of foil, sputtering target, and rod, and compounds as submicron and nanopowder. Thulium  emits blue upon excitation. Flat panel screens depend critically on bright blue emitters. Also, under X-ray bombardment emissions are in both the 375 nm (ultra violet) and 465 (visible blue) wave lengths. This gives the material useful applications in low radiation detection for detection badges and similar uses. It is also used in other luminescence applications, such as halide discharge lamps. Thulium was first discovered by Theodore Cleve in 1879. Thulium is named after "Thule", which is the ancient name of Scandinavia. See Thulium research below.
|
PACKAGING SPECIFICATIONS FOR BULK & RESEARCH QUANTITIES |
Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Shipping documentation includes a Certificate of Analysis and Material Safety Data Sheet (MSDS). Solutions are packaged in polypropylene, plastic or glass jars up to palletized 440 gallon liquid totes.
|
|
| |
Customers for this product have also looked at: |
Recent Research & Development for Thulium
- Comparison of holmium:YAG and thulium fiber laser lithotripsy: ablation thresholds, ablation rates, and retropulsion effects.
Blackmon RL, Irby PB, Fried NM.
J Biomed Opt. 2011 Jul;16(7):071403.
PMID:
21806249
[PubMed - in process]
- Poly[[triaqua-(µ(3)-4-oxidopyridine-2,6-dicarboxyl-ato)thulium(III)] monohydrate].
Gao ZQ, Lv DY, Gu JZ, Li HJ.
Acta Crystallogr Sect E Struct Rep Online. 2011 Apr 1;67(Pt 4):m409. Epub 2011 Mar 9.
PMID:
21753941
[PubMed]
- Natural orifice (NOTES) transurethral sutureless radical prostatectomy with thulium laser support: first patient report.
Nagele U, Anastasiadis AG, Walcher U, Nicklas AP, Merseburger AS, Herrmann TR.
World J Urol. 2011 Jul 8. [Epub ahead of print]
PMID:
21739124
[PubMed - as supplied by publisher]
- A highly selective fluorescent probe for pyrophosphate detection in aqueous solutions.
Ganjali MR, Hosseini M, Aboufazeli F, Faridbod F, Goldooz H, Badiei AR.
Luminescence. 2011 Jul 7. doi: 10.1002/bio.1316. [Epub ahead of print]
PMID:
21735538
[PubMed - as supplied by publisher]
- Novel technique for mode selection in a multimode fiber laser.
Daniel JM, Chan JS, Kim JW, Sahu JK, Ibsen M, Clarkson WA.
Opt Express. 2011 Jun 20;19(13):12434-9. doi: 10.1364/OE.19.012434.
PMID:
21716482
[PubMed - in process]
- 13.1 W, high-beam-quality, narrow-linewidth continuous-wave fiber-based source at 970 nm.
Devi K, Kumar SC, Ebrahim-Zadeh M.
Opt Express. 2011 Jun 6;19(12):11631-7. doi: 10.1364/OE.19.011631.
PMID:
21716396
[PubMed - in process]
- Plasmonic enhanced emissions from cubic NaYF(4):Yb: Er/Tm nanophosphors.
Sudheendra L, Ortalan V, Dey S, Browning ND, Kennedy IM.
Chem Mater. 2011 Jun 14;23(11):2987-2993.
PMID:
21709812
[PubMed]
- Theoretical Treatment of Redox Processes Involving Lanthanide(II) Compounds: Reactivity of Organosamarium(II) and Organothulium(II) Complexes with CO(2) and Pyridine.
Labouille S, Nief F, Maron L.
J Phys Chem A. 2011 Jul 28;115(29):8295-8301. Epub 2011 Jul 6.
PMID:
21675778
[PubMed - as supplied by publisher]
- [170Tm]-Labeled ethylenediamine tetramethylene phosphonic acid.
Chopra A.
Molecular Imaging and Contrast Agent Database (MICAD) [Internet]. Bethesda (MD): National Center for Biotechnology Information (US); 2004-2011.
2011 Apr 27 [updated 2011 May 26].
PMID:
21656985
[PubMed]
- Determination of rare earth elements and other trace elements (Y, Mn, Co, Cr) in seawater using Tm addition and Mg(OH)2 co-precipitation.
Freslon N, Bayon G, Birot D, Bollinger C, Barrat JA.
Talanta. 2011 Jul 15;85(1):582-7. Epub 2011 May 5.
PMID:
21645745
[PubMed - in process]
- Tm:YAG laser en bloc mucosectomy for accurate staging of primary bladder cancer: early experience.
Wolters M, Kramer MW, Becker JU, Christgen M, Nagele U, Imkamp F, Burchardt M, Merseburger AS, Kuczyk MA, Bach T, Gross AJ, Herrmann TR.
World J Urol. 2011 Aug;29(4):429-32. Epub 2011 May 8.
PMID:
21553277
[PubMed - in process]
- Current evidence for transurethral laser therapy of non-muscle invasive bladder cancer.
Kramer MW, Bach T, Wolters M, Imkamp F, Gross AJ, Kuczyk MA, Merseburger AS, Herrmann TR.
World J Urol. 2011 Aug;29(4):433-42. Epub 2011 May 5.
PMID:
21544662
[PubMed - in process]
- Development of a thulium (Tm:YAP) laser system for brain tissue ablation.
Bilici T, Mutlu S, Kalaycioglu H, Kurt A, Sennaroglu A, Gulsoy M.
Lasers Med Sci. 2011 Sep;26(5):699-706. Epub 2011 Apr 12.
PMID:
21484452
[PubMed - in process]
- Delayed presentation of a detached resectoscope beak and treatment with thulium laser.
Davis NF, McGuire BB, Flood HD.
Can Urol Assoc J. 2011 Apr;5(2):E17-8. doi: 10.5489/cuaj.10048.
PMID:
21470544
[PubMed]
- High-pressure phase transitions in rare earth metal thulium to 195 GPa.
Montgomery JM, Samudrala GK, Tsoi GM, Vohra YK.
J Phys Condens Matter. 2011 Apr 20;23(15):155701. Epub 2011 Apr 1.
PMID:
21460429
[PubMed - in process]
- Superbroadband near-infrared emission in Tm-Bi codoped sodium-germanium-gallate glasses.
Zhou B, Lin H, Chen B, Pun EY.
Opt Express. 2011 Mar 28;19(7):6514-23. doi: 10.1364/OE.19.006514.
PMID:
21451680
[PubMed - indexed for MEDLINE]
- Critical review of lasers in benign prostatic hyperplasia (BPH).
Gravas S, Bachmann A, Reich O, Roehrborn CG, Gilling PJ, De La Rosette J.
BJU Int. 2011 Apr;107(7):1030-43. doi: 10.1111/j.1464-410X.2010.09954.x. Review.
PMID:
21438974
[PubMed - indexed for MEDLINE]
- Determination of some heavy metals in food and environmental samples by flame atomic absorption spectrometry after coprecipitation.
Soylak M, Aydin A.
Food Chem Toxicol. 2011 Jun;49(6):1242-8. Epub 2011 Mar 22.
PMID:
21419188
[PubMed - in process]
- Efficient diode-pumped laser operation of Tm:Lu2O3 around 2?µm.
Koopmann P, Lamrini S, Scholle K, Fuhrberg P, Petermann K, Huber G.
Opt Lett. 2011 Mar 15;36(6):948-50. doi: 10.1364/OL.36.000948.
PMID:
21403738
[PubMed - indexed for MEDLINE]
- Comparison of high-dose rate prostate brachytherapy dose distributions with iridium-192, ytterbium-169, and thulium-170 sources.
Krishnamurthy D, Weinberg V, Cunha JA, Hsu IC, Pouliot J.
Brachytherapy. 2011 Mar 10. [Epub ahead of print]
PMID:
21397569
[PubMed - as supplied by publisher]
|
Material Safety Data Sheet |
|
1 Identification of substance
- Product details
- Trade name Thulium Slugs
|
2 Composition/Data on components:
- Chemical characterization:
Designation: (CAS#)
Thulium (CAS# 7440-30-4), 100%
- Identification number(s):
- EINECS Number: 231-140-2
|
3 Hazards identification
- Hazard designation: F Highly flammable
- Information pertaining to particular dangers for man and environment
R 11 Highly flammable.
R 15 Contact with water liberates extremely flammable gases.
|
4 First aid measures
- After inhalation
Supply fresh air. If required, provide artificial respiration. Keep patient warm. Consult doctor if symptoms persist.
Seek immediate medical advice.
- After skin contact
Instantly wash with water and soap and rinse thoroughly.
Seek immediate medical advice.
- After eye contact
Rinse opened eye for several minutes under running water. Then consult doctor.
- After swallowing Seek immediate medical advice.
|
5 Fire fighting measures
- Suitable extinguishing agents Extinguishing powder. Do not use water.
- For safety reasons unsuitable extinguishing agents
Water.
Halocarbon extinguisher
- Special hazards caused by the material, its products of combustion or
flue gases:
Contact with water releases hydrogen (explosive).
- Protective equipment:
Wear self-contained breathing apparatus.
Wear full protective suit.
|
6 Accidental release measures
- Person-related safety precautions:
Wear protective equipment. Keep unprotected persons away.
Ensure adequate ventilation
Keep away from ignition sources
- Measures for environmental protection:
Do not allow material to be released to the environment without proper governmental permits.
- Measures for cleaning/collecting:
Ensure adequate ventilation.
Do not flush with water or aqueous cleansing agents
Keep away from ignition sources.
- Additional information:
See Section 7 for information on safe handling
See section 8 for information on personal protection equipment.
See Section 13 for information on disposal.
|
7 Handling and storage
- Handling
- Information for safe handling:
Handle under dry protective gas.
Keep containers tightly sealed.
Store in cool, dry place in tightly closed containers.
Ensure good ventilation/exhaustion at the workplace.
Open and handle container with care.
- Information about protection against explosions and fires:
Keep ignition sources away - Do not smoke.
Protect against electrostatic charges.
Fumes can combine with air to form an explosive mixture.
- Storage
- Requirements to be met by storerooms and containers:
Store in cool location.
- Information about storage in one common storage facility:
Store away from water.
Do not store together with oxidizing and acidic materials.
Store away from halogens.
- Further information about storage conditions:
Store in petroleum or under dry argon.
Protect from humidity and keep away from water.
Keep container tightly sealed.
Store in cool, dry conditions in well sealed containers.
|
8 Exposure controls and personal protection
- Additional information about design of technical systems:
Properly operating chemical fume hood designed for hazardous chemicals and having an average face velocity of at least 100 feet per minute.
- Components with critical values that require monitoring at the
workplace:
Not required.
- Additional information: No data
- Personal protective equipment
- General protective and hygienic measures
The usual precautionary measures should be adhered to in handling the chemicals.
Keep away from foodstuffs, beverages and food.
Instantly remove any soiled and impregnated garments.
Wash hands during breaks and at the end of the work.
- Breathing equipment: Use breathing protection with high concentrations.
- Protection of hands: Impervious gloves
- Eye protection:
Safety glasses
Full face protection
Face protection
- Body protection: Protective work clothing.
|
9 Physical and chemical properties:
- General Information
- Form: Solid.
- Colour: Silver-coloured
- Smell: Odourless
- Value/Range Unit Method
- Change in condition
- Melting point/Melting range: 1545 ° C
- Boiling point/Boiling range: 1727 ° C
- Sublimation temperature / start: Not determined
- Flash point: Not applicable
- Inflammability (solid, gaseous) Highly flammable.
Contact with water liberates extremely flammable gases.
- Ignition temperature: Not determined
- Decomposition temperature: Not determined
- Critical values for explosion:
- Lower: Not determined
- Upper: Not determined
- Steam pressure: Not determined
- Density at 20 ° C 9.33 g/cm³
- Solubility in / Miscibility with
- Water:
Contact with water releases flammable gases
Not determined
|
10 Stability and reactivity
- Thermal decomposition / conditions to be avoided:
No decomposition if used and stored according to specifications.
- Materials to be avoided:
Oxidizing agents
Water/moisture
Acids
Halogens
Air
- Dangerous reactions: Contact with water releases flammable gases
- Dangerous products of decomposition: Hydrogen
|
11 Toxicological information
- Acute toxicity:
- Primary irritant effect:
- on the skin: Irritant for skin and mucous membranes.
- on the eye: Irritant effect.
- Sensitization: No sensitizing effect known.
- Additional toxicological information:
To the best of our knowledge the acute and chronic toxicity of this substance is not fully known.
|
12 Ecological information:
- General notes:
Do not allow material to be released to the environment without proper governmental permits.
Water hazard class 1 (Self-assessment): slightly hazardous for water.
Do not allow undiluted product or large quantities of it to reach ground water, water bodies or sewage system.
|
13 Disposal considerations
- Product:
- Recommendation
Consult state, local or national regulations for proper disposal.
Hand over to disposers of hazardous waste.
Must be specially treated under adherence to official regulations.
- Uncleaned packagings:
- Recommendation:
Disposal must be made according to official regulations.
|
14 Transport information
- Land transport ADR/RID and GGVS/GGVE (cross-border/domestic)
- ADR/RID-GGVS/E Class: 4.1 (F3) Flammable solids.
- Kemler Number: 40
- UN-Number: 3178
- Packaging group: II
- Label 4.1
- Designation of goods: 3178 FLAMMABLE SOLID, INORGANIC, N.O.S.
(thulium)
- Maritime transport IMDG/GGVSea:
- IMDG/GGVSea Class: 4.1
- UN Number: 3178
- Label 4.1
- Packaging group: II
- Correct technical name: FLAMMABLE SOLID, INORGANIC, N.O.S. (thulium)
- Air transport ICAO-TI and IATA-DGR:
- ICAO/IATA Class: 4.1
- UN/ID Number: 3178
- Label 4.1
- Packaging group: II
- Correct technical name: FLAMMABLE SOLID, INORGANIC, N.O.S. (thulium)
|
15 Regulatory information
- Designation according to EC guidelines:
- Code letter and hazard designation of product: F Highly flammable
- Risk phrases:
11 Highly flammable.
15 Contact with water liberates extremely flammable gases.
- National regulations
- Information about limitation of use:
For use only by technically qualified individuals.
Employment restrictions concerning young persons must be observed.
- Water hazard class:
Water hazard class 1 (Self-assessment): slightly hazardous for water.
|
16 Other information:
Employers should use this information only as a supplement to other information gathered by them, and should make independent judgement of suitability of this information to ensure proper use and protect the health and safety of employees. This information is furnished without warranty, and any use of the product not in conformance with this Material Safety Data Sheet, or in combination with any other product or process, is the responsibility of the user.
|
|
| American Elements is a copyrighted U.S. Trademark. All rights reserved. |
| |
