Zinc 3,5-di-tert-butylsalicylate

CAS #:

Linear Formula:

[[(CH3)3C]2C6H2-2-(OH)CO2]2Zn

MDL Number:

MFCD00075334

EC No.:

403-360-0

ORDER

PRODUCT Product Code ORDER SAFETY DATA TECHNICAL DATA
>97% Zinc 3,5-di-tert-butylsalicylate
ZN-OMX-017
Pricing > SDS > Data Sheet >

Zinc 3,5-di-tert-butylsalicylate Properties (Theoretical)

Compound Formula C30H42O6Zn
Molecular Weight 564.04
Appearance solid
Melting Point 256 °C
Boiling Point N/A
Density N/A
Solubility in H2O N/A
Exact Mass N/A
Monoisotopic Mass 562.227295
Charge N/A

Zinc 3,5-di-tert-butylsalicylate Health & Safety Information

Signal Word Danger
Hazard Statements H228-H302-H410
Hazard Codes F,Xn,N
Risk Codes 11-22-50/53
Safety Statements 7-22-60-61
RTECS Number N/A
Transport Information UN 1325 4.1/PG 3
WGK Germany 3
GHS Pictograms

View and Print SDS

SAFETY DATA SHEET

Date Accessed: 04/23/2024
Date Revised:01/15/2022

SECTION 1. IDENTIFICATION

Product Name: Zinc 3,5-di-tert-butylsalicylate

Product Number: All applicable American Elements product codes, e.g. ZN-OMX-017

CAS #: 42405-40-3

Relevant identified uses of the substance: Scientific research and development

Supplier details:
American Elements
10884 Weyburn Ave.
Los Angeles, CA 90024
Tel: +1 310-208-0551
Fax: +1 310-208-0351

Emergency telephone number:
Domestic, North America: +1 800-424-9300
International: +1 703-527-3887

"


SECTION 2. HAZARDS IDENTIFICATION

Classification of the substance or mixture
GHS Classification in accordance with 29 CFR 1910 (OSHA HCS)
Flammable solids(Category 1), H228
Acute toxicity, Oral(Category 4), H302
Acute aquatic toxicity(Category 1), H400
Chronic aquatic toxicity(Category 1), H410
GHS Label elements, including precautionary statements
Pictogram

Flame - GHS02 Exclamation Mark - GHS07 Environment - GHS09

Signal word
Danger
Hazard statement(s)
H228
Flammable solid.
H302
Harmful if swallowed.
H410
Very toxic to aquatic life with long lasting effects.
Precautionary statement(s)
P210
Keep away from heat/sparks/open flames/hot surfaces. No smoking.
P240
Ground/bond container and receiving equipment.
P241
Use explosion-proof electrical/ ventilating/ lighting/ equipment.
P264
Wash skin thoroughly after handling.
P270
Do not eat, drink or smoke when using this product.
P273
Avoid release to the environment.
P280
Wear protective gloves/ protective clothing/ eye protection/ face protection.
P301 + P312
IF SWALLOWED: Call a POISON CENTER/doctor if you feel unwell.
P330
Rinse mouth.
P370 + P378
In case of fire: Use dry sand, dry chemical or alcohol-resistant foam for extinction.
P391
Collect spillage.
P501
Dispose of contents/ container to an approved waste disposal plant.
Hazards not otherwise classified (HNOC) or not covered by GHS-none


SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS

Substances
Synonyms: 3,5-Di-tert-butylsalicylic acidzinc salt
Formula: C30H42O6Zn
Molecular weight: 564.04 g/mol
CAS-No.: 42405-40-3
EC-No.: 403-360-0
Index-No.: 030-007-00-4


SECTION 4. FIRST AID MEASURES

Description of first aid measures
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
Move out of dangerous area.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact
Wash off with soap and plenty of water. Consult a physician.
In case of eye contact
Flush eyes with water as a precaution.
If swallowed
Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
Most important symptoms and effects, both acute and delayed
The most important known symptoms and effects are described in the labelling (see section 2) and/or in section 11
Indication of any immediate medical attention and special treatment needed
No data available


SECTION 5. FIREFIGHTING MEASURES

Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture
No data available
Advice for firefighters
Wear self-contained breathing apparatus for firefighting if necessary.
Further information
Use water spray to cool unopened containers.


SECTION 6. ACCIDENTAL RELEASE MEASURES

Personal precautions, protective equipment and emergency procedures
Use personal protective equipment. Avoid dust formation. Avoid breathing Vapors, mist or gas. Ensure adequate ventilation. Remove all sources of ignition. Evacuate personnel to safe areas. Avoid breathing dust.
For personal protection see section 8.
Environmental precautions
Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the environment must be avoided.
Methods and materials for containment and cleaning up
Sweep up and shovel. Contain spillage, and then collect with an electrically protected vacuum cleaner or by wet-brushing and place in container for disposal according to local regulations (see section 13). Keep in suitable, closed containers for disposal. Contain spillage, pick up with an electrically protected vacuum cleaner or by wet-brushing and transfer to a container for disposal according to local regulations (see section 13).
Reference to other sections
For disposal see section 13.


SECTION 7. HANDLING AND STORAGE

Precautions for safe handling
Avoid contact with skin and eyes. Avoid formation of dust and aerosols.
Further processing of solid materials may result in the formation of combustible dusts. The potential for combustible dust formation should be taken into consideration before additional processing occurs.
Provide appropriate exhaust ventilation at places where dust is formed.Keep away from sources of ignition -No smoking.Take measures to prevent the build up of electrostatic charge.
For precautions see section 2.
Conditions for safe storage, including any incompatibilities
Keep container tightly closed in a dry and well-ventilated place.
Keep in a dry place.
Specific end use(s)
Apart from the uses mentioned in section 1 no other specific uses are stipulated


SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION

Control parameters
Components with workplace control parameters
Contains no substances with occupational exposure limit values.
Exposure controls
Appropriate engineering controls
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday.
Personal protective equipment
Eye/face protection
Safety glasses with side-shields conforming to EN166 Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands.
Body Protection
Complete suit protecting against chemicals, Flame retardant antistatic protective clothing., The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection
Where risk assessment shows air-purifying respirators are appropriate use a full-face particle respirator type N100 (US) or type P3 (EN 143) respirator cartridges as a backup to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU).
Control of environmental exposure
Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the environment must be avoided.


SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES

Information on basic physical and chemical properties
Appearance
Form: powder
Colour: white
Odor
No data available
Odor Threshold
No data available
pH
No data available
Melting point/freezing point
Melting point/range: 256 °C (493 °F)-dec.
Initial boiling point and boiling range
> 265 °C (> 509 °F) at 1,013 hPa (760 mmHg)
Flash point
No data available
Evaporation rate
No data available
Flammability (solid, gas)
No data available
Upper/lower flammability or explosive limits
No data available
Vapor pressure
No data available
Vapor density
No data available
Relative density
No data available
Water solubility
0.018 g/l at 20 °C (68 °F)
Partition coefficient: n-octanol/water
log Pow: 2.32 at 18 °C (64 °F)
Auto-ignition temperature
> 400 °C (> 752 °F)
Decomposition temperature
No data available
Viscosity
No data available
Explosive properties
No data available
Oxidizing properties
No data available
Other safety information
Surface tension
60.4 mN/m at 20 °C (68 °F)


SECTION 10. STABILITY AND REACTIVITY

Reactivity
No data available
Chemical stability
Stable under recommended storage conditions.
Possibility of hazardous reactions
No data available
Conditions to avoid
Heat, flames and sparks. Extremes of temperature and direct sunlight.
Incompatible materials
Strong oxidizing agents
Hazardous decomposition products
Hazardous decomposition products formed under fire conditions.-Carbon oxides, Zinc/zinc oxides
Other decomposition products-No data available
In the event of fire: see section 5


SECTION 11. TOXICOLOGICAL INFORMATION

Information on toxicological effects
Acute toxicity
LD50 Oral-Rat-male and female-1,800 mg/kg
(OECD Test Guideline 401)
Inhalation:
No data available
LD50 Dermal-Rat-male and female-> 2,000 mg/kg
(OECD Test Guideline 402)
No data available
Skin corrosion/irritation
Skin-Rabbit
Result: No skin irritation
(OECD Test Guideline 404)
Serious eye damage/eye irritation
Eyes-Rabbit
Result: No eye irritation
(OECD Test Guideline 405)
Respiratory or skin sensitisation
Maximisation Test-Guinea pig
Did not cause sensitisation on laboratory animals.
(OECD Test Guideline 406)
Germ cell mutagenicity
in vitro assay
S. typhimurium
Result: negative
Mutagenicity (micronucleus test)
Mouse
Result: negative
Carcinogenicity
IARC:
No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
ACGIH:
No component of this product present at levels greater than or equal to 0.1% is identified as a
carcinogen or potential carcinogen by ACGIH.
NTP:
No component of this product present at levels greater than or equal to 0.1% is identified as a
known or anticipated carcinogen by NTP.
No component of this product present at levels greater than or equal to
0.1% is identified as a known or anticipated carcinogen by NTP.
OSHA:
No component of this product present at levels greater than or equal to 0.1% is identified as a
carcinogen or potential carcinogen by OSHA.
No component of this product present at levels greater than or equal to 0.1% is identified as a
carcinogen or potential carcinogen by OSHA.
Reproductive toxicity
No data available
No data available
Specific target organ toxicity -single exposure
No data available
Specific target organ toxicity -repeated exposure
No data available
Aspiration hazard
No data available
Additional Information
RTECS: Not available
To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly investigated.


SECTION 12. ECOLOGICAL INFORMATION

Toxicity
Toxicity to fish
semi-static test
LC50-Onchorhynchus clarki-5.5 mg/l-96 h
Toxicity to daphnia and other aquatic invertebrates
static test
EC50-Daphnia (water flea)-0.73 mg/l-48 h
Toxicity to algae
EC50-Selenastrum capricornutum (green algae)-6.7 mg/l-72 h
(OECD Test Guideline 201)
Persistence and degradability
Biodegradability
aerobic-Exposure time 28 d
Result: 15 %-Not readily biodegradable.
(OECD Test Guideline 301D)
Bioaccumulative potential
No data available
Mobility in soil
No data available
Results of PBT and vPvB assessment
PBT/vPvB assessment not available as chemical safety assessment not required/not conducted
Other adverse effects
An environmental hazard cannot be excluded in the event of unprofessional handling or disposal.
Very toxic to aquatic life with long lasting effects.
No data available


SECTION 13. DISPOSAL CONSIDERATIONS

Waste treatment methods
Product
Burn in a chemical incinerator equipped with an afterburner and scrubber but exert extra care in igniting as this material is highly flammable.
Offer surplus and non-recyclable solutions to a licensed disposal company.
Contaminated packaging
Dispose of as unused product.


SECTION 14. TRANSPORT INFORMATION

DOT (US)
UN number: 1325
Class: 4.1
Packing group: III
Proper shipping name: Flammable solids, organic, n.o.s.(Zinc 3,5-di-tert-butylsalicylate)
Reportable Quantity(RQ):
Marine pollutant: yes
Poison Inhalation Hazard: No
IMDG
UN number: 1325
Class: 4.1
Packing group: III
EMS-No: F-A, S-G
Proper shipping name: FLAMMABLE SOLID, ORGANIC, N.O.S.(Zinc 3,5-di-tert-butylsalicylate)
Marine pollutant: yes
IATA
UN number: 1325
Class: 4.1
Packing group: III
Proper shipping name: Flammable solid, organic, n.o.s.(Zinc 3,5-di-tert-butylsalicylate)


SECTION 15. REGULATORY INFORMATION

SARA 302 Components
No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302.
SARA 313 Components
The following components are subject to reporting levels established by SARA Title III, Section 313:
Zinc 3,5-di-tert-butylsalicylate
CAS-No.
42405-40-3
Revision Date
2007-07-01
SARA 311/312 Hazards
Fire Hazard, Acute Health Hazard
Massachusetts Right To Know Components
No components are subject to the Massachusetts Right to Know Act.
Pennsylvania Right To Know Components
Zinc 3,5-di-tert-butylsalicylate
CAS-No.
42405-40-3
Revision Date
2007-07-01
New Jersey Right To Know Components
Zinc 3,5-di-tert-butylsalicylate
CAS-No.
42405-40-3
Revision Date
2007-07-01
California Prop. 65 Components
This product does not contain any chemicals known to State of California to cause cancer, birth defects, or any other reproductive harm..


SECTION 16. OTHER INFORMATION

Safety Data Sheet according to Regulation (EC) No. 1907/2006 (REACH). The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any guarantee of the properties of the product. American Elements shall not be held liable for any damage resulting from handling or from contact with the above product. See reverse side of invoice or packing slip for additional terms and conditions of sale. COPYRIGHT 1997-2022 AMERICAN ELEMENTS. LICENSED GRANTED TO MAKE UNLIMITED PAPER COPIES FOR INTERNAL USE ONLY.

About Zinc 3,5-di-tert-butylsalicylate

Zinc 3,5-di-tert-butylsalicylate is generally immediately available in most volumes. High purity, submicron and nanopowder forms may be considered. American Elements produces to many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia) and follows applicable ASTM testing standards. Typical and custom packaging is available. Additional technical, research and safety (MSDS) information is available as is a Reference Calculator for converting relevant units of measurement.

Zinc 3,5-di-tert-butylsalicylate Synonyms

3, 5-Bis(1,1-dimethylethyl)-2-hydroxybenzoic acid zinc(II) complex, 3, 5-Di-tert-butylsalicylic acid zinc salt

Chemical Identifiers

Linear Formula [[(CH3)3C]2C6H2-2-(OH)CO2]2Zn
MDL Number MFCD00075334
EC No. 403-360-0
Beilstein/Reaxys No. N/A
Pubchem CID 4255607
IUPAC Name 3,5-ditert-butyl-2-hydroxybenzoic acid; zinc
SMILES [Zn+2].CC(C)(C)c1cc(cc(C([O-])=O)c1O)C(C)(C)C.[O-]C(=O)c1cc(cc(c1O)C(C)(C)C)C(C)(C)C
InchI Identifier InChI=1S/2C15H22O3.Zn/c2*1-14(2,3)9-7-10(13(17)18)12(16)11(8-9)15(4,5)6;/h2*7-8,16H,1-6H3,(H,17,18);/q;;+2/p-2
InchI Key HCOFMIWUFBMIPV-UHFFFAOYSA-L

Packaging Specifications

Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Shipping documentation includes a Certificate of Analysis and Safety Data Sheet (SDS). Solutions are packaged in polypropylene, plastic or glass jars up to palletized 440 gallon liquid totes, and 36,000 lb. tanker trucks.

Related Elements

Zinc

See more Zinc products. Zinc (atomic symbol: Zn, atomic number: 30) is a Block D, Group 12, Period 4 element with an atomic weight of 65.38. The number of electrons in each of zinc's shells is 2, 8, 18, 2, and its electron configuration is [Ar] 3d10 4s2. Zinc Bohr ModelThe zinc atom has a radius of 134 pm and a Van der Waals radius of 210 pm. Zinc was discovered by Indian metallurgists prior to 1000 BC and first recognized as a unique element by Rasaratna Samuccaya in 800. Zinc was first isolated by Andreas Marggraf in 1746. In its elemental form, zinc has a silver-gray appearance. It is brittle at ordinary temperatures but malleable at 100 °C to 150 °C.Elemental Zinc It is a fair conductor of electricity, and burns in air at high red producing white clouds of the oxide. Zinc is mined from sulfidic ore deposits. It is the 24th most abundant element in the earth's crust and the fourth most common metal in use (after iron, aluminum, and copper). The name zinc originates from the German word "zin," meaning tin.

TODAY'S TOP DISCOVERY!

April 23, 2024
Los Angeles, CA
Each business day American Elements' scientists & engineers post their choice for the most exciting materials science news of the day
Researchers develop enzymatic cocktail that can kill tuberculosis-causing mycobacteria

Researchers develop enzymatic cocktail that can kill tuberculosis-causing mycobacteria