Antimony(V) Fluoride

CAS #:

Linear Formula:

SbF5

MDL Number:

MFCD00011219

EC No.:

232-021-8

ORDER

PRODUCT Product Code ORDER SAFETY DATA TECHNICAL DATA
(2N) 99% Antimony(V) Fluoride
SB5-F-02
Pricing > SDS > Data Sheet >
(3N) 99.9% Antimony(V) Fluoride
SB5-F-03
Pricing > SDS > Data Sheet >
(4N) 99.99% Antimony(V) Fluoride
SB5-F-04
Pricing > SDS > Data Sheet >
(5N) 99.999% Antimony(V) Fluoride
SB5-F-05
Pricing > SDS > Data Sheet >

Antimony(V) Fluoride Properties (Theoretical)

Compound Formula F5Sb
Molecular Weight 216.75
Appearance colorless oily liquid
Melting Point 8.3 °C (46.94 °F)
Boiling Point 149.5 °C (301.1 °F)
Density 2.993 g/cm3
Solubility in H2O N/A
Exact Mass 215.895832
Monoisotopic Mass 215.895832

Antimony(V) Fluoride Health & Safety Information

Signal Word Warning
Hazard Statements H302 + H332-H411
Hazard Codes Xn,N
Precautionary Statements P261-P301 + P312 + P330
Flash Point Not applicable
Risk Codes 20/22-51/53
Safety Statements 61
RTECS Number N/A
Transport Information UN 1732 6.1(8) / PGII
WGK Germany 2
GHS Pictograms

View and Print SDS

SAFETY DATA SHEET

Date Accessed: 04/16/2024
Date Revised:01/15/2022

SECTION 1. IDENTIFICATION

Product Name: Antimony(V) Fluoride

Product Number: All applicable American Elements product codes, e.g. SB5-F-02 , SB5-F-03 , SB5-F-04 , SB5-F-05

CAS #: 7783-70-2

Relevant identified uses of the substance: Scientific research and development

Supplier details:
American Elements
10884 Weyburn Ave.
Los Angeles, CA 90024
Tel: +1 310-208-0551
Fax: +1 310-208-0351

Emergency telephone number:
Domestic, North America: +1 800-424-9300
International: +1 703-527-3887


SECTION 2. HAZARDS IDENTIFICATION

Classification of the substance or mixture
GHS Classification in accordance with 29 CFR 1910 (OSHA HCS)
Acute toxicity, Oral (Category 4), H302
Acute toxicity, Inhalation (Category 4), H332
Acute aquatic toxicity (Category 2), H401
Chronic aquatic toxicity (Category 2), H411

GHS Label elements, including precautionary statements
Pictogram

Exclamation Mark - GHS07 Environment - GHS09

Signal word: Warning
Hazard statement(s)
H302 + H332
Harmful if swallowed or if inhaled
H411
Toxic to aquatic life with long lasting effects.
Precautionary statement(s)
P261
Avoid breathing dust/ fume/ gas/ mist/ Vapors/ spray.
P264
Wash skin thoroughly after handling.
P270
Do not eat, drink or smoke when using this product.
P271
Use only outdoors or in a well-ventilated area.
P273
Avoid release to the environment.
P301 + P312 + P330
IF SWALLOWED: Call a POISON CENTER or doctor/ physician if you feel unwell. Rinse mouth.
P304 + P340 + P312
IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Call a POISON CENTER or doctor/ physician if you feel unwell.
P391
Collect spillage.
P501
Dispose of contents/ container to an approved waste disposal plant.
Hazards not otherwise classified (HNOC) or not covered by GHS - none.


SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS

Substances
Synonyms: Antimony pentafluoride
Formula: F5Sb
Molecular weight: 216.75 g/mol
CAS-No.: 7783-70-2
EC-No.: 232-021-8
Index-No.: 051-003-00-9


SECTION 4. FIRST AID MEASURES

Description of first aid measures
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
Move out of dangerous area.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact
Wash off with soap and plenty of water. Consult a physician.
In case of eye contact
Flush eyes with water as a precaution.
If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
Most important symptoms and effects, both acute and delayed
The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in section 11
Indication of any immediate medical attention and special treatment needed
No data available


SECTION 5. FIREFIGHTING MEASURES

Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture
Hydrogen fluoride, Antimony oxide
Advice for firefighters
Wear self-contained breathing apparatus for firefighting if necessary.
Further information
No data available


SECTION 6. ACCIDENTAL RELEASE MEASURES

Personal precautions, protective equipment and emergency procedures
Use personal protective equipment. Avoid breathing Vapors, mist or gas. Ensure adequate ventilation.
For personal protection see section 8.
Environmental precautions
Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the environment must be avoided.
Methods and materials for containment and cleaning up
Soak up with inert absorbent material and dispose of as hazardous waste. Keep in suitable, closed containers for disposal.
Reference to other sections
For disposal see section 13.


SECTION 7. HANDLING AND STORAGE

Precautions for safe handling
Avoid contact with skin and eyes. Avoid inhalation of Vapor or mist.
For precautions see section 2.2.
Conditions for safe storage, including any incompatibilities
Keep container tightly closed in a dry and well-ventilated place.
Containers which are opened must be carefully resealed and kept upright to prevent leakage.
Reacts violently with water.
Storage class (TRGS 510): Non Combustible Liquids
Specific end use(s)
Apart from the uses mentioned in section 1.2 no other specific uses are stipulated


SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION

Exposure controls
Appropriate engineering controls
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday.
Personal protective equipment
Eye/face protection
Face shield and safety glasses Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands.
Body Protection
Complete suit protecting against chemicals, The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection
Where risk assessment shows air-purifying respirators are appropriate use a full-face respirator with multi-purpose combination (US) or type ABEK (EN 14387) respirator cartridges as a backup to engineering controls.
If the respirator is the sole means of protection, use a full-face supplied air respirator. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU).
Control of environmental exposure
Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the environment must be avoided.


SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES

Information on basic physical and chemical properties
Appearance
Form: liquid
Colour: colourless
Odor: No data available
Odor Threshold: No data available
pH: No data available
Melting point/freezing point
Melting point/range: 7 °C (45 °F) - lit.
Initial boiling point and boiling range: 148 - 150 °C (298 - 302 °F) - lit.
Flash point: N/A
Evaporation rate: No data available
Flammability (solid, gas): No data available
Upper/lower flammability or explosive limits: No data available
Vapor pressure: 13 hPa (10 mmHg) at 25 °C (77 °F)
Vapor density: 7.48 - (Air = 1.0)
Relative density: 2.993 g/cm3 at 25 °C (77 °F)
Water solubility: No data available
Partition coefficient: n-octanol/water: No data available
Auto-ignition temperature: No data available
Decomposition temperature: No data available
Viscosity: No data available
Explosive properties: No data available
Oxidizing properties: No data available
Other safety information
Relative Vapor density: 7.48 - (Air = 1.0)


SECTION 10. STABILITY AND REACTIVITY

Reactivity
No data available
Chemical stability
Stable under recommended storage conditions.
Possibility of hazardous reactions
No data available
Conditions to avoid
Do not allow water to enter container because of violent reaction.
Incompatible materials
Strong oxidizing agents
Strong bases, Water, Highly toxic fumes
Hazardous decomposition products
Other decomposition products - No data available
In the event of fire: see section 5


SECTION 11. TOXICOLOGICAL INFORMATION

Information on toxicological effects
Acute toxicity
No data available
Inhalation: No data available
Dermal: No data available
No data available
Skin corrosion/irritation: No data available
Serious eye damage/eye irritation: No data available
Respiratory or skin sensitisation: No data available
Germ cell mutagenicity: No data available
Carcinogenicity
IARC:
3 - Group 3: Not classifiable as to its carcinogenicity to humans (Antimony(V) fluoride)
NTP:
No component of this product present at levels greater than or equal to 0.1% is identified as a
known or anticipated carcinogen by NTP.
OSHA:
No component of this product present at levels greater than or equal to 0.1% is identified as a
carcinogen or potential carcinogen by OSHA.
Reproductive toxicity
No data available
No data available
Specific target organ toxicity - single exposure
No data available
Specific target organ toxicity - repeated exposure
No data available
Aspiration hazard
No data available
Additional Information
RTECS: Not available
Salivation, Nausea, Abdominal pain, Vomiting, Fever, Rapid respiration, Fluoride ion can reduce serum calcium levels possibly causing fatal hypocalcemia., Material is extremely destructive to tissue of the mucous membranes and upper respiratory tract, eyes, and skin spasm, inflammation and edema of the larynx, spasm, inflammation and edema of the bronchi, pneumonitis, pulmonary edema, burning sensation
Stomach - Irregularities - Based on Human Evidence
Stomach - Irregularities - Based on Human Evidence


SECTION 12. ECOLOGICAL INFORMATION

Toxicity
No data available
Persistence and degradability
No data available
Bioaccumulative potential
No data available
Mobility in soil
No data available
Results of PBT and vPvB assessment
PBT/vPvB assessment not available as chemical safety assessment not required/not conducted
Other adverse effects
An environmental hazard cannot be excluded in the event of unprofessional handling or disposal.
Toxic to aquatic life with long lasting effects.


SECTION 13. DISPOSAL CONSIDERATIONS

Waste treatment methods
Product
Offer surplus and non-recyclable solutions to a licensed disposal company.
Contact a licensed professional waste disposal service to dispose of this material.
Contaminated packaging
Dispose of as unused product.


SECTION 14. TRANSPORT INFORMATION

DOT (US)
UN number: 1732
Class: 8 (6.1)
Packing group: II
Proper shipping name: Antimony pentafluoride
Reportable Quantity (RQ):
Poison Inhalation Hazard: No
IMDG
UN number: 1732
Class: 8 (6.1)
Packing group: II
EMS-No: F-A, S-B
Proper shipping name: ANTIMONY PENTAFLUORIDE
Marine pollutant: yes
IATA
UN number:1732
Class: 8 (6.1)
Packing group: II
Proper shipping name: Antimony pentafluoride
IATA Passenger: Not permitted for transport


SECTION 15. REGULATORY INFORMATION

SARA 302
Components
The following components are subject to reporting levels established by SARA Title III, Section 302:
Antimony(V) fluoride
CAS-No.: 7783-70-2
Revision Date: 2007-07-01
SARA 313
Components
The following components are subject to reporting levels established by SARA Title III, Section 313:
Antimony(V) fluoride
CAS-No.: 7783-70-2
Revision Date: 2007-07-01
SARA 311/312
Hazards
Acute Health Hazard, Chronic Health Hazard
Massachusetts Right To Know Components
Antimony(V) fluoride
CAS-No.: 7783-70-2
Revision Date: 2007-07-01
Pennsylvania Right To Know Components
Antimony(V) fluoride
CAS-No.: 7783-70-2
Revision Date: 2007-07-01
New Jersey Right To Know Components
Antimony(V) fluoride
CAS-No.: 7783-70-2
Revision Date: 2007-07-01
California Prop. 65 Components
This product does not contain any chemicals known to State of California to cause cancer, birth defects, or any other reproductive harm.


SECTION 16. OTHER INFORMATION

Safety Data Sheet according to Regulation (EC) No. 1907/2006 (REACH). The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any guarantee of the properties of the product. American Elements shall not be held liable for any damage resulting from handling or from contact with the above product. See reverse side of invoice or packing slip for additional terms and conditions of sale. COPYRIGHT 1997-2022 AMERICAN ELEMENTS. LICENSED GRANTED TO MAKE UNLIMITED PAPER COPIES FOR INTERNAL USE ONLY.

About Antimony(V) Fluoride

Antimony(V) Fluoride is a water insoluble Antimony source for use in oxygen-sensitive applications, such as metal production. Fluoride compounds have diverse applications in current technologies and science, from oil refining and etching to synthetic organic chemistry and the manufacture of pharmaceuticals. Magnesium Fluoride, for example, was used by researchers at the Max Planck Institute for Quantum Optics in 2013 to create a novel mid-infrared optical frequency comb composed of crystalline microresonators, a development that may lead to future advances in molecular spectroscopy. Fluorides are also commonly used to alloy metals and for optical deposition. Antimony(V) Fluoride is generally immediately available in most volumes. Ultra high purity and high purity compositions improve both optical quality and usefulness as scientific standards. Nanoscale elemental powders and suspensions, as alternative high surface area forms, may be considered. American Elements produces to many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia) and follows applicable ASTM testing standards. Typical and custom packaging is available. Additional technical, research and safety (MSDS) information is available as is a Reference Calculator for converting relevant units of measurement.

Antimony(V) Fluoride Synonyms

Pentafluoroantimony, Antimony(5+) fluoride, Antimony(V) pentafluoride, Antimony pentafluoride, Pentafluorostiborane

Chemical Identifiers

Linear Formula SbF5
MDL Number MFCD00011219
EC No. 232-021-8
Beilstein/Reaxys No. N/A
Pubchem CID 24557
IUPAC Name pentafluoro-λ5-stibane
SMILES F[Sb](F)(F)(F)F
InchI Identifier InChI=1S/5FH.Sb/h5*1H;/q;;;;;+5/p-5
InchI Key VBVBHWZYQGJZLR-UHFFFAOYSA-I

Packaging Specifications

Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Shipping documentation includes a Certificate of Analysis and Safety Data Sheet (SDS). Solutions are packaged in polypropylene, plastic or glass jars up to palletized 440 gallon liquid totes, and 36,000 lb. tanker trucks.

Related Elements

Antimony

See more Antimony products. Antimony (atomic symbol: Sb, atomic number: 51) is a Block P, Group 15, Period 5 element with an atomic radius of 121.760. Antimony Bohr Model The number of electrons in each of antimony's shells is 2, 8, 18, 18, 5 and its electron configuration is [Kr] 4d10 5s2 5p3. The antimony atom has a radius of 140 pm and a Van der Waals radius of 206 pm. Antimony was discovered around 3000 BC and first isolated by Vannoccio Biringuccio in 1540 AD. In its elemental form, antimony has a silvery lustrous gray appearance. Elemental Antimony The most common source of antimony is the sulfide mineral known as stibnite (Sb2S3), although it sometimes occurs natively as well. Antimony has numerous applications, most commonly in flame-retardant materials. It also increases the hardness and strength of lead when combined in an alloy and is frequently employed as a dopant in semiconductor materials. Its name is derived from the Greek words anti and monos, meaning a metal not found by itself.

Fluorine

Fluorine is a Block P, Group 17, Period 2 element. Its electron configuration is [He]2s22p5. The fluorine atom has a covalent radius of 64 pm and its Van der Waals radius is 135 pm. In its elemental form, CAS 7782-41-4, fluorine gas has a pale yellow appearance. Fluorine was discovered by André-Marie Ampère in 1810. It was first isolated by Henri Moissan in 1886.

TODAY'S TOP DISCOVERY!

April 16, 2024
Los Angeles, CA
Each business day American Elements' scientists & engineers post their choice for the most exciting materials science news of the day
University of Waterloo IQC researchers efficiently produce nearly perfect entangled photon pairs from quantum dot sources

University of Waterloo IQC researchers efficiently produce nearly perfect entangled photon pairs from quantum dot sources