20th anniversary seal20th anniversary seal20th anniversary seal

Cobalt Aluminate Sputtering Target

CAS #:

Linear Formula:

CoAl2O4

MDL Number:

MFCD00016016

EC No.:

215-610-4

ORDER

PRODUCT Product Code ORDER SAFETY DATA TECHNICAL DATA
(2N) 99% Cobalt Aluminate Sputtering Target
CO2-ALO-02-ST
Pricing > SDS > Data Sheet >
(2N5) 99.5% Cobalt Aluminate Sputtering Target
CO2-ALO-025-ST
Pricing > SDS > Data Sheet >
(3N) 99.9% Cobalt Aluminate Sputtering Target
CO2-ALO-03-ST
Pricing > SDS > Data Sheet >
(3N5) 99.95% Cobalt Aluminate Sputtering Target
CO2-ALO-035-ST
Pricing > SDS > Data Sheet >
(4N) 99.99% Cobalt Aluminate Sputtering Target
CO2-ALO-04-ST
Pricing > SDS > Data Sheet >
(5N) 99.999% Cobalt(II) Aluminate Sputtering Target
CO2-ALO-05-ST
Pricing > SDS > Data Sheet >

Cobalt Aluminate Sputtering Target Properties (Theoretical)

Compound Formula Al2CoO4
Molecular Weight 176.89
Appearance solid
Melting Point N/A
Boiling Point N/A
Density N/A
Solubility in H2O N/A
Exact Mass 176.875936
Monoisotopic Mass 176.875936

Cobalt Aluminate Sputtering Target Health & Safety Information

Signal Word Warning
Hazard Statements H315-H317-H319-H335-H351
Hazard Codes Xn
Risk Codes 36/37/38-40-43-53
Safety Statements 22-26-37/39-45
RTECS Number N/A
Transport Information N/A
WGK Germany 3

View and Print SDS

SAFETY DATA SHEET

Date Accessed: 12/08/2019
Date Revised: 05/15/2015

SECTION 1. IDENTIFICATION

Product Name: Cobalt Aluminate Sputtering Target

Product Number: All applicable American Elements product codes, e.g. CO2-ALO-02-ST 02 , CO2-ALO-025-ST 025 , CO2-ALO-03-ST 03 , CO2-ALO-035-ST 035 , CO2-ALO-04-ST 04 , CO2-ALO-05-ST 05

CAS #: 1333-88-6

Relevant identified uses of the substance: Scientific research and development

Supplier details:
American Elements
10884 Weyburn Ave.
Los Angeles, CA 90024
Tel: +1 310-208-0551
Fax: +1 310-208-0351

Emergency telephone number:
Domestic, North America: +1 800-424-9300
International: +1 703-527-3887


SECTION 2. HAZARDS IDENTIFICATION

Statements of Hazard: Irritant, Skin sensitizer
Acute Health Hazard: Irritant to eyes, skin, mucous membranes and
respiratory system. May be harmful by ingestion,
inhalation or skin absorption.
Chronic Health Hazard: Target organ effect, Carcinogen
HMIS Rating: H:2 F:0 P:0
NFPA Rating: H:2 F:0 R:0
To the best of our knowledge, the toxicological properties of this chemical have not
been thoroughly investigated. Use appropriate procedures and precautions to prevent
or minimize exposure.
Pictogram:

Health Hazard - GHS08 Exclamation Mark - GHS07

Signal Word: Warning
Hazard Statement(s): H302 Harmful if swallowed.
H312 Harmful in contact with skin.
H317 May cause an allergic skin reaction.
H319 Causes serious eye irritation.
H332 Harmful if inhaled.
H335 May cause respiratory irritation.
H351 suspected of causing cancer.
Precautionary Statement(s): P261 Avoid breathing dust/ fume/ gas/ mist/ vapors/ spray.
P280 Wear protective gloves/protective clothing/eye
protection/face protection.
P301+P312 IF SWALLOWED: Call a POISON
CENTER or doctor/physician if you feel unwell.
P302+P352 IF ON SKIN: Wash with plenty of soap
and water.
P304+P340 IF INHALED: Remove victim to fresh air
and keep at rest in a position comfortable for
breathing.
P305+P351+P338 IF IN EYES: Rinse cautiously
with water for several minutes. Remove contact
lenses, if present and easy to do. Continue rinsing.
P308+P313 IF exposed or concerned: Get
medical advice/attention.
P333+P313 If skin irritation or rash occurs: Get
medical advice/ attention.


SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS

Chemical Name: Cobalt aluminate Tech. Grade
Synonyms: Not Available
CAS Number: 1333-88-6
MDL Number: MFCD00016016
EINECS Number: 215-610-4
Belstein Registry Number: Not Available
Molecular Formula: CoAl2O4
Molecular Weight: 176.89
Content: 95 - 100%
Notes: Not Available


SECTION 4. FIRST AID MEASURES

Eye Contact: Flush eyes with large amounts of water for fifteen
minutes. Separate eyelids with fingers. If irritation
persists, seek medical attention.
Skin Contact: Wash skin with soap and water. If irritation persists,
seek medical attention.
Ingestion: Do not induce vomiting. Seek medical attention.
Inhalation: Move to a fresh air environment. Contact a physician
if breathing becomes difficult.


SECTION 5. FIREFIGHTING MEASURES

Flash Point: Not Available
Explosion Limits: Lower: Not Available
Upper: Not Available
Autoignition: Not Available
Extinguishing Media: Carbon dioxide, dry chemical powder, alcohol-
resistant foam or water spray.
Protective Equipment: Wear self-contained respirator and fully protective
impervious suit.
Specific Hazards: May emit hazardous fumes under fire conditions.


SECTION 6. ACCIDENTAL RELEASE MEASURES

Personal Protection: Wear a self-contained breathing apparatus, rubber
boots and gloves, and disposable coveralls. Dispose of
coveralls after use.
Keep unprotected persons away.
Environmental Protection: Keep spills out of sewers and bodies of water. Dike
and contain the spill with inert material. Absorb on
sand, vermiculite or diatomite. Transfer material to a
container for disposal or recovery. Ventilate area and
wash spill site after material pickup is complete.


SECTION 7. HANDLING AND STORAGE

Handling: Avoid breathing dust, vapor, mist or gas. Avoid
contact with skin and eyes. Avoid prolonged or
repeated exposure. Use only in a chemical fume
hood. Open and handle container with care. Keep
ignition sources away.
Storage: Store in a tightly closed container in a dry, well-
ventilated place.
Sensitivities: Not Available
Storage Temperature: 15 – 30 ºC


SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION

Eyes: Wear appropriate protective eyeglass or chemical
safety goggles. Make sure that there is an eyewash
facility in your vicinity.
Skin: Wear impervious gloves and protective clothing.
Respiratory: Use a NIOSH approved respirator when exposure
limits are exceeded or if irritation or other symptoms
are experienced.
Exposure Limits: Country Source Type Value
USA ACGIH TWA Not Available
USA OSHA STEL Not Available
USA OSHA PEL Not Available


SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES

Appearance: Solid
Odor: Not Available
Melting Point: 660 ºC
Boiling Point: 2467 ºC
pH Value: Not Available
Density: Not Available
Refractive Index, n20
D: Not Available
Viscosity: Not Available
Solubility in Water: Not Available
Vapor Pressure: Not Available
Vapor Density (Air=1): Not Available


SECTION 10. STABILITY AND REACTIVITY

Stability: Stable under normal temperatures and pressures.
Incompatibility: Strong oxidizing agents.
Conditions to Avoid: Heat, Flame, Sparks, Other ignition sources
Hazardous Decomposition Products: Aluminum oxides, Cobalt oxides.


SECTION 11. TOXICOLOGICAL INFORMATION

RTECS Reference: Not Available
Target Organs: Lungs, Blood, Thyroid
Toxicity Data: Not Available
Skin corrosion/irritation: Not Available
Serious eye damage/irritation: Not Available
Carcinogenicity: Not Available


SECTION 12. ECOLOGICAL INFORMATION

Toxicity: Not Available
Persistence and degradability: Not Available
Bioaccumulative potential: Not Available
Mobility in soil: Not Available
PBT and vPvB assessment: Not Available
Other adverse effects: Not Available


SECTION 13. DISPOSAL CONSIDERATIONS

Contact a licensed professional waste disposal service. Dispose in a manner consistent
with federal, state and local environmental regulations.


SECTION 14. TRANSPORT INFORMATION

DOT: Not Regulated
IATA: Not Regulated
IMDG: Not Regulated


SECTION 15. REGULATORY INFORMATION

United States:
Toxic Substance Control Act (TSCA): Listed
Superfund Amendments and Reauthorization Act (SARA 302): Not listed
Superfund Amendments and Reauthorization Act (SARA 311/312): Not listed
Superfund Amendments and Reauthorization Act (SARA 313): Not listed
European Union:
European Inventory of Existing Chemical Substances (EINECS): No. 200-755-8
Hazard Codes: Xn
Risk Statements: 36/37/38-40-43-53
Safety Statements: 22-26-37/39-45
Canada
Canadian Domestic Substances List (DSL): Listed
Canadian Domestic Substances List (NDSL): Not listed


SECTION 16. OTHER INFORMATION

Safety Data Sheet according to Regulation (EC) No. 1907/2006 (REACH). The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any guarantee of the properties of the product. American Elements shall not be held liable for any damage resulting from handling or from contact with the above product. See reverse side of invoice or packing slip for additional terms and conditions of sale. COPYRIGHT 1997-2018 AMERICAN ELEMENTS. LICENSED GRANTED TO MAKE UNLIMITED PAPER COPIES FOR INTERNAL USE ONLY.

About Cobalt Aluminate Sputtering Target

High Purity (99.99%) Cobalt Aluminate Sputtering TargetAmerican Elements specializes in producing high purity Cobalt Aluminate Sputtering Targets with the highest possible density and smallest possible average grain sizes for use in semiconductor, chemical vapor deposition (CVD) and physical vapor deposition (PVD) display and optical applications. Our standard Sputtering Targets for thin film are available monoblock or bonded with planar target dimensions and configurations up to 820 mm with hole drill locations and threading, beveling, grooves and backing designed to work with both older sputtering devices as well as the latest process equipment, such as large area coating for solar energy or fuel cells and flip-chip applications. We offer all shapes and configurations of targets compatible with all standard guns including circular, rectangular, annular, oval, "dog-bone," rotatable (rotary), multi-tiled and others in standard, custom, and research sized dimensions. All targets are analyzed using best demonstrated techniques including X-Ray Fluorescence (XRF), Glow Discharge Mass Spectrometry (GDMS), and Inductively Coupled Plasma (ICP). "Sputtering" allows for thin film deposition of an ultra high purity sputtering metallic or oxide material onto another solid substrate by the controlled removal and conversion of the target material into a directed gaseous/plasma phase through ionic bombardment. Materials are produced using crystallization, solid state and other ultra high purification processes such as sublimation. American Elements specializes in producing custom compositions for commercial and research applications and for new proprietary technologies. American Elements also casts any of the rare earth metals and most other advanced materials into rod, bar or plate form, as well as other machined shapes and through other processes such as nanoparticles and in the form of solutions and organometallics. We also produce Zinc as rods, powder and plates. Other shapes are available by request.

Cobalt Aluminate Sputtering Target Synonyms

N/A

Chemical Identifiers

Linear Formula CoAl2O4
MDL Number MFCD00016016
EC No. 215-610-4
Beilstein Registry No. N/A
Pubchem CID 12888320
IUPAC Name N/A
SMILES [Co+2].[O-][Al]=O.[O-][Al]=O
InchI Identifier InChI=1S/2Al.Co.4O/q;;+2;;;2*-1
InchI Key BVTIIQXILLBFIK-UHFFFAOYSA-N

Packaging Specifications

Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Shipping documentation includes a Certificate of Analysis and Safety Data Sheet (SDS). Solutions are packaged in polypropylene, plastic or glass jars up to palletized 440 gallon liquid totes, and 36,000 lb. tanker trucks.

Payment Methods

American Elements accepts checks, wire transfers, ACH, most major credit and debit cards (Visa, MasterCard, AMEX, Discover) and Paypal.

For the convenience of our international customers, American Elements offers the following additional payment methods:

SOFORT bank tranfer payment for Austria, Belgium, Germany and SwitzerlandJCB cards for Japan and WorldwideBoleto Bancario for BraziliDeal payments for the Netherlands, Germany, Austria, Belgium, Italy, Poland, Spain, Switzerland, and the United KingdomGiroPay for GermanyDankort cards for DenmarkElo cards for BrazileNETS for SingaporeCartaSi for ItalyCarte-Bleue cards for FranceChina UnionPayHipercard cards for BrazilTROY cards for TurkeyBC cards for South KoreaRuPay for India

Related Elements

See more Cobalt products. Cobalt (atomic symbol: Co, atomic number: 27) is a Block D, Group 9, Period 4 element with an atomic weight of 58.933195. Cobalt Bohr ModelThe number of electrons in each of cobalt's shells is 2, 8, 15, 2 and its electron configuration is [Ar] 3d7 4s2The cobalt atom has a radius of 125 pm and a Van der Waals radius of 192 pm. Cobalt was first discovered by George Brandt in 1732. In its elemental form, cobalt has a lustrous gray appearance. Cobalt is found in cobaltite, erythrite, glaucodot and skutterudite ores. Elemental CobaltCobalt produces brilliant blue pigments which have been used since ancient times to color paint and glass. Cobalt is a ferromagnetic metal and is used primarily in the production of magnetic and high-strength superalloys. Co-60, a commercially important radioisotope, is useful as a radioactive tracer and gamma ray source. The origin of the word Cobalt comes from the German word "Kobalt" or "Kobold," which translates as "goblin," "elf" or "evil spirit." For more information on cobalt, including properties, safety data, research, and American Elements' catalog of cobalt products, visit the Cobalt element page.

See more Aluminum products. Aluminum (or Aluminum) (atomic symbol: Al, atomic number: 13) is a Block P, Group 13, Period 3 element with an atomic weight of 26.9815386. It is the third most abundant element in the earth's crust and the most abundant metallic element. Aluminum Bohr Model Aluminum's name is derived from alumina, the mineral from which Sir Humphrey Davy attempted to refine it from in 1812. It wasn't until 1825 that Aluminum was first isolated by Hans Christian Oersted. Aluminum is a silvery gray metal that possesses many desirable characteristics. It is light, nonmagnetic and non-sparking. It stands second among metals in the scale of malleability, and sixth in ductility. It is extensively used in many industrial applications where a strong, light, easily constructed material is needed. Elemental AluminumAlthough it has only 60% of the electrical conductivity of copper, it is used in electrical transmission lines because of its light weight. Pure aluminum is soft and lacks strength, but alloyed with small amounts of copper, magnesium, silicon, manganese, or other elements it imparts a variety of useful properties. Aluminum was first predicted by Antoine Lavoisierin 1787 and first isolated by Friedrich Wöhler in 1827.

TODAY'S SCIENCE POST!

December 08, 2019
Los Angeles, CA
Each business day American Elements' scientists & engineers post their choice for the most exciting materials science news of the day

Stretchable, highly conductive film promising for wearable electronics