Safety Data Sheet

SAFETY DATA SHEET

Date Accessed: 03/29/2024
Date Revised: 01/15/2022

SECTION 1. IDENTIFICATION

Product Name: Gallium Phosphide Nanodispersion

Product Number: All applicable American Elements product codes, e.g. GA-P-01-NPD

CAS #: 12063-98-8

Relevant identified uses of the substance: Scientific research and development

Supplier details:
American Elements
10884 Weyburn Ave.
Los Angeles, CA 90024
Tel: +1 310-208-0551
Fax: +1 310-208-0351

Emergency telephone number:
Domestic, North America: +1 800-424-9300
International: +1 703-527-3887


SECTION 2. HAZARDS IDENTIFICATION

Classification according to Regulation (EC) No 1272/2008
Eye irritation (Category 2) H319
Specific target organ toxicity - single exposure (Category 3) H335
Flammable liquids (Category 3) H226
Acute toxicity, Oral (Category 4) H302
Acute toxicity, Inhalation (Category 4) H332
Acute toxicity, Dermal (Category 4) H312
Skin irritation (Category 2) H315
Eye irritation (Category 2) H319
Skin sensitisation (Category 1) H317
Chronic aquatic toxicity (Category 3) H412
Labeling according Regulation (EC) No 1272/2008
Pictogram:

Flame - GHS02 Exclamation Mark - GHS07

Hazard statement(s):
H226 Flammable liquid and vapor.
H302 + H312 + H332 Harmful if swallowed, in contact with skin or if inhaled
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H319 Causes serious eye irritation.
H335 May cause respiratory irritation.
H412 Harmful to aquatic life with long lasting effects.
Precautionary statement(s)
P261 Avoid breathing vapors.
P273 Avoid release to the environment.
P280 Wear protective gloves/ protective clothing.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes.
Remove contact lenses, if present and easy to do. Continue rinsing.
Supplemental Hazard Statements: none
2.3 Other hazards
This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.


SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS

Formula: GaP and C7H12O2
Molecular weight: 100,70 g/mol and 128,17 g/mol
CAS-No.: 12063-98-8 and 141-32-2
EC-No. 235-057-2 and 205-480-7
Hazardous ingredients according to Regulation (EC) No 1272/2008


SECTION 4. FIRST AID MEASURES

General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a
physician.
In case of skin contact
Wash off with soap and plenty of water. Consult a physician.
In case of eye contact
Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
If swallowed
Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
Most important symptoms and effects, both acute and delayed
The most important known symptoms and effects are described in the labeling (see section 2)
and/or in section 11
Indication of any immediate medical attention and special treatment needed
No data available


SECTION 5. FIREFIGHTING MEASURES

Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture
Carbon oxides
Advice for firefighters
Wear self-contained breathing apparatus for fire fighting if necessary.
Further information
Use water spray to cool unopened containers.


SECTION 6. ACCIDENTAL RELEASE MEASURES

Personal precautions, protective equipment and emergency procedures
Use personal protective equipment. Avoid breathing vapors, mist or gas. Ensure adequate ventilation.
Remove all sources of ignition. Evacuate personnel to safe areas. Beware of vapors accumulating to form explosive concentrations. Vapors can accumulate in low areas.
For personal protection see section 8.
Environmental precautions
Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the environment must be avoided.
Methods and materials for containment and cleaning up
Contain spillage, and then collect with an electrically protected vacuum cleaner or by wet-brushing and place in container for disposal according to local regulations (see section 13).
Reference to other sections
For disposal see section 13.


SECTION 7. HANDLING AND STORAGE

Precautions for safe handling
Avoid contact with skin and eyes. Avoid formation of dust and aerosols. Provide appropriate exhaust ventilation at places where dust is formed.
For precautions see section 2.
Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage.
Light sensitive.
Storage class (TRGS 510): Flammable liquids
Specific end use(s)
Apart from the uses mentioned in section 1 no other specific uses are stipulated


SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION

Control parameters
Components with workplace control parameters
Exposure controls
Appropriate engineering controls
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks
and at the end of work
Personal protective equipment
Eye/face protection
Safety glasses with side-shields conforming to EN166 Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
(without touching glove's outer surface) to avoid skin contact with this product. Dispose of
contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it.
Body Protection
Complete suit protecting against chemicals. The type of protective equipment must be selected
according to the concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection
Where risk assessment shows air-purifying respirators are appropriate use a full-face respirator with multi-purpose combination (US) or type ABEK (EN 14387) respirator cartridges as a backup to
engineering controls. If the respirator is the sole means of protection, use a full-face supplied air
respirator. Use respirators and components tested and approved under appropriate government
standards such as NIOSH (US) or CEN (EU).
Control of environmental exposure
Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the environment must be avoided.


SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES

Information on basic physical and chemical properties
a) Appearance Form: liquid Color: yellowish
b) Odor No data available
c) Odor Threshold No data available
d) pH No data available
e) Melting point/freezing point No data available
f) Initial boiling point and boiling range 145 °C - lit.
g) Flash point 36 °C - closed cup
h) Evaporation rate No data available
i) Flammability (solid, gas) No data available
j) Upper/lower flammability or explosive limits Upper explosion limit: 9,9 %(V)
Lower explosion limit: 1,3 %(V)
k) Vapor pressure 4,4 hPa at 20 °C
l) Vapor density 4,43 - (Air = 1.0)
m) Relative density No data available
n) Water solubility No data available
o) Partition coefficient: n- octanol/water No data available
p) Auto-ignition temperature No data available
q) Decomposition temperature No data available
r) Viscosity No data available
s) Explosive properties No data available
t) Oxidizing properties No data available
Other safety information
No data available


SECTION 10. STABILITY AND REACTIVITY

Reactivity
No data available
Chemical stability
Stable under recommended storage conditions.
Possibility of hazardous reactions
No data available
Conditions to avoid
Heat, flames and sparks.
Incompatible materials
Strong acids, Strong oxidizing agents, Strong bases
If dried: Forms shock-sensitive mixtures with certain other materials., Oxidizing agents, Chlorine,
Oxygen, Sulphur compounds
Hazardous decomposition products
Hazardous decomposition products formed under fire conditions. - Oxides of phosphorus, gallium
oxides
Other decomposition products - No data available
In the event of fire: see section 5


SECTION 11. TOXICOLOGICAL INFORMATION

Information on toxicological effects
Acute toxicity:
LD50 Oral - Rat - 900 mg/kg
LC50 Inhalation - Rat - 4 h - 2730 ppm
Remarks: Sense Organs and Special Senses (Nose, Eye, Ear, and Taste):Olfaction:Other changes.
Sense Organs and Special Senses (Nose, Eye, Ear, and Taste):Eye:Other. Lungs, Thorax, or
Respiration:Dyspnea.
LD50 Dermal - Rabbit - 1.796 mg/kg
Skin corrosion/irritation No data available
Serious eye damage/eye irritation No data available
Respiratory or skin sensitization No data available
Germ cell mutagenicity No data available
Carcinogenicity
IARC: 3 - Group 3: Not classifiable as to its carcinogenicity to humans (Butyl acrylate)
Reproductive toxicity
Reproductive toxicity - Rat - Inhalation
Maternal Effects: Other effects. Effects on Fertility: Post-implantation mortality (e.g., dead and/or
resorbed implants per total number of implants).
Reproductive toxicity - Rat - Inhalation
Effects on Fertility: Post-implantation mortality (e.g., dead and/or resorbed implants per total number of implants).
Specific target organ toxicity - single exposure May cause respiratory irritation.
Specific target organ toxicity - repeated exposure No data available
Aspiration hazard No data available
Additional Information
RTECS: LW9675000 (GaP) and RTECS: UD3150000 (Butyl acrylate)


SECTION 12. ECOLOGICAL INFORMATION

Toxicity
Toxicity to fish:
flow-through test LC50 - Cyprinodon variegatus (sheepshead minnow) - 2,1 mg/l -96h
(OECD Test Guideline 203)
Toxicity to daphnia and other aquatic invertebrates:
static test EC50 - Daphnia magna (Water flea) - 1,3 mg/l - 48 h (OECD Test Guideline 202)
Persistence and degradability:
Biodegradability aerobic - Exposure time 28 d - Result: 80 - 90 % - Readily biodegradable.
(OECD Test Guideline 310)
Bio-accumulative potential
No data available
Mobility in soil:
No data available
Results of PBT and vPvB assessment:
This substance/mixture contains no components considered to be either persistent, bioaccumulative
and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
Other adverse effects
Toxic to aquatic life. Avoid release to the environment.


SECTION 13. DISPOSAL CONSIDERATIONS

Waste treatment methods
Product
Offer surplus and non-recyclable solutions to a licensed disposal company. Dissolve or mix the
material with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber.
Contaminated packaging
Dispose of as unused product.


SECTION 14. TRANSPORT INFORMATION

UN-number
ADR/RID: 2348 IMDG: 2348 IATA: 2348
UN proper shipping name
ADR/RID: BUTYL ACRYLATES, STABILIZED
IMDG: BUTYL ACRYLATES, STABILIZED
IATA: BUTYL ACRYLATES, STABILIZED
Transport hazard class(es)
ADR/RID: 3 IMDG: 3 IATA: 3
Packaging group
ADR/RID: III IMDG: III IATA: III
Environmental hazards
ADR/RID: no IMDG Marine pollutant: no IATA: no


SECTION 15. REGULATORY INFORMATION

This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
Safety, health and environmental regulations/legislation specific for the substance or mixture
No data available
Chemical Safety Assessment
For this product a chemical safety assessment was not carried out.