Iron(III) Titanium Oxide

CAS #:

Linear Formula:

Fe2TiO5

MDL Number:

MFCD00064705

EC No.:

235-828-3

ORDER

PRODUCT Product Code ORDER SAFETY DATA TECHNICAL DATA
(2N) 99% Iron(III) Titanium Oxide
FE-TIO-02
Pricing > SDS > Data Sheet >
(2N5) 99.5% Iron(III) Titanium Oxide
FE-TIO-025
Pricing > SDS > Data Sheet >
(3N) 99.9% Iron(III) Titanium Oxide
FE-TIO-03
Pricing > SDS > Data Sheet >
(3N5) 99.95% Iron(III) Titanium Oxide
FE-TIO-035
Pricing > SDS > Data Sheet >
(4N) 99.99% Iron(III) Titanium Oxide
FE-TIO-04
Pricing > SDS > Data Sheet >
(5N) 99.999% Iron(III) Titanium Oxide
FE-TIO-05
Pricing > SDS > Data Sheet >

Iron(III) Titanium Oxide Properties (Theoretical)

Compound Formula Fe2TiO5
Molecular Weight 239.55
Appearance Gray powder
Melting Point N/A
Boiling Point N/A
Density 4.39 g/cm3
Solubility in H2O N/A
Exact Mass 239.792385 g/mol
Monoisotopic Mass 239.792385 g/mol

Iron(III) Titanium Oxide Health & Safety Information

Signal Word N/A
Hazard Statements N/A
Hazard Codes N/A
RTECS Number N/A
Transport Information N/A
MSDS / SDS

About Iron(III) Titanium Oxide

Iron(III) Titanium Oxide is generally immediately available in most volumes. High purity, submicron and nanopowder forms may be considered. Titanate compounds contain a form of Titanium Oxide and have various applications including electronics, ceramics, and batteries (in the case of Lithium Titanate). Researchers from the University of Illinois recently created nanofiber mats of zinc titanate that can scrub sulfur impurities from petroleum-based fuels more efficiently than existing methods, a nanotechnology-based development that may lower the cost of fuel technologies in the future. American Elements produces to many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia)and follows applicable ASTM testing standards. Typical and custom packaging is available. Additional technical, research and safety (MSDS) information is available as is a Reference Calculator for converting relevant units of measurement.

Iron(III) Titanium Oxide Synonyms

Pseudobrookite; CAS 1310-39-0; Iron(III) Titanate; Fe2O7Ti2; FeOTi

Chemical Identifiers

Linear Formula Fe2TiO5
MDL Number MFCD00064705
EC No. 235-828-3
Beilstein/Reaxys No. N/A
Pubchem CID 102602542
IUPAC Name oxo-bis(oxoferriooxy)titanium
SMILES O[Fe]O[Ti](=O)O[Fe]=O
InchI Identifier InChI=1S/2Fe.5O.Ti
InchI Key XDDMRALGXLUUDH-UHFFFAOYSA-N

Packaging Specifications

Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Shipping documentation includes a Certificate of Analysis and Safety Data Sheet (SDS). Solutions are packaged in polypropylene, plastic or glass jars up to palletized 440 gallon liquid totes, and 36,000 lb. tanker trucks.

Related Elements

Iron

See more Iron products. Iron (atomic symbol: Fe, atomic number: 26) is a Block D, Group 8, Period 4 element with an atomic weight of 55.845. The number of electrons in each of Iron's shells is 2, 8, 14, 2 and its electron configuration is [Ar] 3d6 4s2. Iron Bohr ModelThe iron atom has a radius of 126 pm and a Van der Waals radius of 194 pm. Iron was discovered by humans before 5000 BC. In its elemental form, iron has a lustrous grayish metallic appearance. Iron is the fourth most common element in the Earth's crust and the most common element by mass forming the earth as a whole. Iron is rarely found as a free element, since it tends to oxidize easily; it is usually found in minerals such as magnetite, hematite, goethite, limonite, or siderite.Elemental Iron Though pure iron is typically soft, the addition of carbon creates the alloy known as steel, which is significantly stronger.

Titanium

See more Titanium products. Titanium (atomic symbol: Ti, atomic number: 22) is a Block D, Group 4, Period 4 element with an atomic weight of 47.867. The number of electrons in each of Titanium's shells is [2, 8, 10, 2] and its electron configuration is [Ar] 3d2 4s2. Titanium Bohr ModelThe titanium atom has a radius of 147 pm and a Van der Waals radius of 187 pm. Titanium was discovered by William Gregor in 1791 and first isolated by Jöns Jakob Berzelius in 1825. In its elemental form, titanium has a silvery grey-white metallic appearance. Titanium's properties are chemically and physically similar to zirconium, both of which have the same number of valence electrons and are in the same group in the periodic table. Elemental TitaniumTitanium has five naturally occurring isotopes: 46Ti through 50Ti, with 48Ti being the most abundant (73.8%). Titanium is found in igneous rocks and the sediments derived from them. It is named after the word Titanos, which is Greek for Titans.

TODAY'S TOP DISCOVERY!

November 03, 2024
Los Angeles, CA
Each business day American Elements' scientists & engineers post their choice for the most exciting materials science news of the day
CityUHK researchers discover method to reduce energy loss in metal nanostructures by altering their geometrical dimensions

CityUHK researchers discover method to reduce energy loss in metal nanostructures by altering their geometrical dimensions