Skip to main content

Iron Tape

CAS #: 7439-89-6
Linear Formula:
Fe
MDL Number
MFCD00010999
EC No.:
231-096-4

ORDER

Product Product Code ORDER SAFETY DATA Technical data
(2N) 99% Iron Tape FE-M-02-TAPE SDS > Data Sheet >
(2N5) 99.5% Iron Tape FE-M-025-TAPE SDS > Data Sheet >
(3N) 99.9% Iron Tape FE-M-03-TAPE SDS > Data Sheet >
(3N5) 99.95% Iron Tape FE-M-035-TAPE SDS > Data Sheet >
(4N) 99.99% Iron Tape FE-M-04-TAPE SDS > Data Sheet >
(5N) 99.999% Iron Tape FE-M-05-TAPE SDS > Data Sheet >
WHOLESALE/SKU 0000-742-{{nid}}

Iron Tape Properties (Theoretical)

Molecular Weight 55.85
Appearance Gray
Melting Point 1535 °C
Boiling Point 2750 °C
Density kg/m3
Solubility in H2O N/A
Poisson's Ratio 0.29
Young's Modulus 211 GPa
Vickers Hardness 608 MPa
Tensile Strength N/A
Thermal Conductivity 0.804 W/cm/K @ 298.2 K
Thermal Expansion (25 °C) 11.8 µm·m-1·K-1
Electrical Resistivity 9.71 microhm-cm @ 20 °C
Electronegativity 1.8 Paulings
Specific Heat 0.106 Cal/g/K @ 25 °C
Heat of Vaporization 84.6 K-Cal/gm atom at 2750 °C

Iron Tape Health & Safety Information

Signal Word N/A
Hazard Statements N/A
Hazard Codes N/A
Risk Codes N/A
Safety Statements N/A
Transport Information N/A

About Iron Tape

Iron Tape Iron Tape is commonly used as a strong light weight outer coating. Additionally, tapes can serve as adhesives that bond two objects together. American Elements produces to many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopeia/British Pharmacopeia) and follows applicable ASTM testing standards. American Elements specializes in producing Iron High Purity Tape and sheets in many thicknesses and sizes for numerous industrial uses and provides health and occupational safety information for this product. Most tapes are produced from cast ingots for use in coating and thin film Chemical Vapor Deposition (CVD) and Physical Vapor Deposition (PVD) processes including Thermal and Electron Beam (E-Beam) Evaporation, Low Temperature Organic Evaporation, Atomic Layer Deposition (ALD), Organometallic and Chemical Vapor Deposition (MOCVD) for specific applications such as fuel cells and solar energy. Iron Tape is usually in the form of long, thin, rolled metal iron strips. Thickness can range from 0.003" to approximately 2mm for all metals. Some metals can also be rolled down as thin as 0.001" for use as an evaporation source in microelectronics, optics, magnetics, MEMS, and hard resistant coatings. Piece sizes are available up to approximately 7" maximum width. Maximum lengths of about 20" can be obtained with a nominal thickness between about 0.005" and 0.020" for thin film deposition on glass or metal substrates. Materials are produced using crystallization, solid state and other ultra high purification processes such as sublimation. American Elements specializes in producing custom compositions for commercial and research applications and for new proprietary technologies. American Elements also casts any of the rare earth metals and most other advanced materials into rod, bar or plate form, as well as other machined shapes and through other processes such as nanoparticles and in the form of solutions and organometallics. We also produce Iron as rods, powder and plates. Other shapes are available by request. Iron Tape is used as a protective coating on a wide variety of materials. Tape is also used in packaging applications.

Synonyms

N/A

Chemical Identifiers

Linear Formula Fe
Pubchem CID 23925
MDL Number MFCD00010999
EC No. 231-096-4
Beilstein/Reaxys No. N/A
SMILES [Fe]
InchI Identifier InChI=1S/Fe
InchI Key XEEYBQQBJWHFJM-UHFFFAOYSA-N
Chemical Formula
Molecular Weight
Standard InchI
Appearance
Melting Point
Boiling Point
Density

Packaging Specifications

Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Shipping documentation includes a Certificate of Analysis and Safety Data Sheet (SDS). Solutions are packaged in polypropylene, plastic or glass jars up to palletized 440 gallon liquid totes, and 36,000 lb. tanker trucks.

Related Elements

See more Iron products. Iron (atomic symbol: Fe, atomic number: 26) is a Block D, Group 8, Period 4 element with an atomic weight of 55.845. The number of electrons in each of Iron's shells is 2, 8, 14, 2 and its electron configuration is [Ar] 3d6 4s2. Iron Bohr ModelThe iron atom has a radius of 126 pm and a Van der Waals radius of 194 pm. Iron was discovered by humans before 5000 BC. In its elemental form, iron has a lustrous grayish metallic appearance. Iron is the fourth most common element in the Earth's crust and the most common element by mass forming the earth as a whole. Iron is rarely found as a free element, since it tends to oxidize easily; it is usually found in minerals such as magnetite, hematite, goethite, limonite, or siderite.Elemental Iron Though pure iron is typically soft, the addition of carbon creates the alloy known as steel, which is significantly stronger.