20th anniversary seal20th anniversary seal20th anniversary seal

Lithium Nanoprisms

CAS #:

Linear Formula:

Li

MDL Number:

MFCD00134051

EC No.:

231-102-5

ORDER

PRODUCT Product Code ORDER SAFETY DATA TECHNICAL DATA
(2N) 99% Lithium Nanoprisms
LI-M-02-NPR
Pricing > SDS > Data Sheet >
(2N5) 99.5% Lithium Nanoprisms
LI-M-025-NPR
Pricing > SDS > Data Sheet >
(3N) 99.9% Lithium Nanoprisms
LI-M-03-NPR
Pricing > SDS > Data Sheet >
(3N5) 99.95% Lithium Nanoprisms
LI-M-035-NPR
Pricing > SDS > Data Sheet >
(4N) 99.99% Lithium Nanoprisms
LI-M-04-NPR
Pricing > SDS > Data Sheet >
(5N) 99.999% Lithium Nanoprisms
LI-M-05-NPR
Pricing > SDS > Data Sheet >

Lithium Nanoprisms Properties (Theoretical)

Molecular Weight 6.941
Appearance solid
Melting Point 180.54 °C
Boiling Point 1342 °C
Density N/A
Bulk Density N/A
True Density 0.534 g/cm3
Size Range N/A
Average Particle Size N/A
Specific Surface Area N/A
Morphology N/A
Crystal Phase / Structure N/A
Poisson's Ratio N/A
Thermal Expansion (25 °C) 46 µm·m-1·K-1
Vickers Hardness N/A
Young's Modulus 4.9 GPa

Lithium Nanoprisms Health & Safety Information

Signal Word N/A
Hazard Statements N/A
Hazard Codes N/A
Risk Codes N/A
Safety Statements N/A
Transport Information N/A

View and Print SDS

SAFETY DATA SHEET

Date Accessed: 12/11/2018
Date Revised: 05/15/2015

SECTION 1. IDENTIFICATION

Product Name: Lithium Nanoprisms

Product Number: All applicable American Elements product codes, e.g. LI-M-02-NPR , LI-M-025-NPR , LI-M-03-NPR , LI-M-035-NPR , LI-M-04-NPR , LI-M-05-NPR

CAS #: 7439-93-2

Relevant identified uses of the substance: Scientific research and development

Supplier details:
American Elements
10884 Weyburn Ave.
Los Angeles, CA 90024
Tel: +1 310-208-0551
Fax: +1 310-208-0351

Emergency telephone number:
Domestic, North America: +1 800-424-9300
International: +1 703-527-3887


SECTION 16. OTHER INFORMATION

Safety Data Sheet according to Regulation (EC) No. 1907/2006 (REACH). The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any guarantee of the properties of the product. American Elements shall not be held liable for any damage resulting from handling or from contact with the above product. See reverse side of invoice or packing slip for additional terms and conditions of sale. COPYRIGHT 1997-2018 AMERICAN ELEMENTS. LICENSED GRANTED TO MAKE UNLIMITED PAPER COPIES FOR INTERNAL USE ONLY.

About Lithium Nanoprisms

American Elements specializes in producing Lithium as flat irregularly shaped pieces of material in a varying range of sizes. Most flakes/prisms are produced from cast ingots for use in coating and thin film Chemical Vapor Deposition (CVD) and Physical Vapor Deposition (PVD) processes including Thermal and Electron Beam (E-Beam) Evaporation, Low Temperature Organic Evaporation, Atomic Layer Deposition (ALD), Organometallic and Chemical Vapor Deposition (MOCVD) for specific applications such as fuel cells and solar energy. Thickness can range from 0.003" to approximately 2mm for all metals. Some metals can also be rolled down as thin as 0.001" for use as an evaporation source in microelectronics, optics, magnetics, MEMS, and hard resistant coatings. Piece sizes are available up to approximately 7" maximum width. Maximum lengths of about 20" can be obtained with a nominal thickness between about 0.005" and 0.020" for thin film deposition on glass or metal substrates. Materials are produced using crystallization, solid state and other ultra high purification processes such as sublimation. American Elements specializes in producing custom compositions for commercial and research applications and for new proprietary technologies. American Elements also casts any of the rare earth metals and most other advanced materials into rod, bar, or plate form, as well as other machined shapes and through other processes such as nanoparticles and in the form of solutions and organometallics. We also produce Lithium as rods, powder and plates. Other shapes are available by request.

Lithium Nanoprisms Synonyms

N/A

Chemical Identifiers

Linear Formula Li
MDL Number MFCD00134051
EC No. 231-102-5
Beilstein Registry No. N/A
Pubchem CID 3028194
SMILES [Li]
InchI Identifier InChI=1S/Li
InchI Key WHXSMMKQMYFTQS-UHFFFAOYSA-N

Packaging Specifications

Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Shipping documentation includes a Certificate of Analysis and Safety Data Sheet (SDS). Solutions are packaged in polypropylene, plastic or glass jars up to palletized 440 gallon liquid totes, and 36,000 lb. tanker trucks.

Related Elements

Lithium Bohr ModelSee more Lithium products. Lithium (atomic symbol: Li, atomic number: 3) is a Block S, Group 1, Period 2 element with an atomic weight of 6.94. The number of electrons in each of Lithium's shells is [2, 1] and its electron configuration is [He] 2s1. The lithium atom has a radius of 152 pm and a Van der Waals radius of 181 pm. Lithium was discovered by Johann Arvedson in 1817 and first isolated by William Thomas Brande in 1821. The origin of the name Lithium comes from the Greek wordlithose which means "stone." Lithium is a member of the alkali group of metals. It has the highest specific heat and electrochemical potential of any element on the period table and the lowest density of any elements that are solid at room temperature. Elemental LithiumCompared to other metals, it has one of the lowest boiling points. In its elemental form, lithium is soft enough to cut with a knife its silvery white appearance quickly darkens when exposed to air. Because of its high reactivity, elemental lithium does not occur in nature. Lithium is the key component of lithium-ion battery technology, which is becoming increasingly more prevalent in electronics.

TODAY'S SCIENCE POST!

December 11, 2018
Los Angeles, CA
Each business day American Elements' scientists & engineers post their choice for the most exciting materials science news of the day

Microscopic Liquid Crystal "Sunflowers" for better solar panels