20th anniversary seal20th anniversary seal20th anniversary seal

Lithium Tetrabromonickelate(II) Solution

CAS #:

Linear Formula:

Li2NiBr4

MDL Number:

MFCD00192058

EC No.:

N/A

ORDER

PRODUCT Product Code ORDER SAFETY DATA TECHNICAL DATA
(2N) 99% Lithium Tetrabromonickelate(II) Solution
LI-BRNI-02-SOL
Pricing > SDS > Data Sheet >
(2N5) 99.5% Lithium Tetrabromonickelate(II) Solution
LI-BRNI-025-SOL
Pricing > SDS > Data Sheet >
(3N) 99.9% Lithium Tetrabromonickelate(II) Solution
LI-BRNI-03-SOL
Pricing > SDS > Data Sheet >
(3N5) 99.95% Lithium Tetrabromonickelate(II) Solution
LI-BRNI-035-SOL
Pricing > SDS > Data Sheet >
(4N) 99.99% Lithium Tetrabromonickelate(II) Solution
LI-BRNI-04-SOL
Pricing > SDS > Data Sheet >
(5N) 99.999% Lithium Tetrabromonickelate(II) Solution
LI-BRNI-05-SOL
Pricing > SDS > Data Sheet >

Lithium Tetrabromonickelate(II) Solution Properties (Theoretical)

Compound Formula Li2NiBr4
Molecular Weight 392.19
Appearance Blue liquid
Melting Point N/A
Boiling Point 67 °C
Density 1.065 g/mL
Solubility in H2O N/A
Exact Mass 391.636607
Monoisotopic Mass 387.6407

Lithium Tetrabromonickelate(II) Solution Health & Safety Information

Signal Word Danger
Hazard Statements H225-H319-H335-H350
Hazard Codes F,T
Risk Codes 45-11-19-36/37
Safety Statements 53-16-26-45
RTECS Number N/A
Transport Information UN 1993 3/PG 2
WGK Germany 3
GHS Pictograms

View and Print SDS

SAFETY DATA SHEET

Date Accessed: 12/10/2019
Date Revised: 05/15/2015

SECTION 1. IDENTIFICATION

Product Name: Lithium Tetrabromonickelate(II) Solution

Product Number: All applicable American Elements product codes, e.g. LI-BRNI-02-SOL 02 , LI-BRNI-025-SOL 025 , LI-BRNI-03-SOL 03 , LI-BRNI-035-SOL 035 , LI-BRNI-04-SOL 04 , LI-BRNI-05-SOL 05

CAS #: 13826-95-4

Relevant identified uses of the substance: Scientific research and development

Supplier details:
American Elements
10884 Weyburn Ave.
Los Angeles, CA 90024
Tel: +1 310-208-0551
Fax: +1 310-208-0351

Emergency telephone number:
Domestic, North America: +1 800-424-9300
International: +1 703-527-3887


SECTION 2. HAZARDS IDENTIFICATION

2.1 Classification of the substance or mixture
GHS Classification in accordance with 29 CFR 1910 (OSHA HCS)
Flammable liquids (Category 2), H225
Eye irritation (Category 2A), H319
Carcinogenicity (Category 1B), H350
Specific target organ toxicity - single exposure (Category 3), Respiratory system, H335
For the full text of the H-Statements mentioned in this Section, see Section 16.
2.2 GHS Label elements, including precautionary statements
Pictogram

Flame - GHS02Health Hazard - GHS08Exclamation Mark - GHS07

Signal word Danger
Hazard statement(s)
H225 Highly flammable liquid and vapor.
H319 Causes serious eye irritation.
H335 May cause respiratory irritation.
H350 May cause cancer.
Precautionary statement(s)
P201 Obtain special instructions before use.
P202 Do not handle until all safety precautions have been read and
understood.
P210 Keep away from heat/sparks/open flames/hot surfaces. No smoking.
P233 Keep container tightly closed.
P240 Ground/bond container and receiving equipment.
P241 Use explosion-proof electrical/ ventilating/ lighting/ equipment.
P242 Use only non-sparking tools.
P243 Take precautionary measures against static discharge.
P261 Avoid breathing dust/ fume/ gas/ mist/ vapors/ spray.
P264 Wash skin thoroughly after handling.
P271 Use only outdoors or in a well-ventilated area.
P280 Wear protective gloves/ protective clothing/ eye protection/ face
protection.
P303 + P361 + P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing.
Rinse skin with water/shower.
P304 + P340 + P312 IF INHALED: Remove person to fresh air and keep comfortable for
breathing. Call a POISON CENTER or doctor/ physician if you feel
unwell.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
P308 + P313 IF exposed or concerned: Get medical advice/ attention.
P337 + P313 If eye irritation persists: Get medical advice/ attention.
P370 + P378 In case of fire: Use dry sand, dry chemical or alcohol-resistant foam to
extinguish.
P403 + P233 Store in a well-ventilated place. Keep container tightly closed.
P403 + P235 Store in a well-ventilated place. Keep cool.
P405 Store locked up.
P501 Dispose of contents/ container to an approved waste disposal plant.
2.3 Hazards not otherwise classified (HNOC) or not covered by GHS
May form explosive peroxides.


SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS

3.2 Mixtures
Synonyms : di-Lithium tetrabromonickelate(II)
Lithium tetrabromonickelate(II)solution
Formula : Br4Li2Ni
Molecular weight : 392.19 g/mol
Hazardous components
Component Classification Concentration
Tetrahydrofuran
CAS-No.
EC-No.
Index-No.
Registration number
109-99-9
203-726-8
603-025-00-0
01-2119444314-46-XXXX
Flam. Liq. 2; Acute Tox. 4; Eye
Irrit. 2A; Carc. 2; STOT SE 3;
H225, H302, H319, H335,
H351
>= 70 - < 90 %
di-Lithium tetrabromonickelate(II)
CAS-No.
13826-95-4
Carc. 1B; H350 >= 20 - < 30 %
For the full text of the H-Statements mentioned in this Section, see Section 16.


SECTION 4. FIRST AID MEASURES

4.1 Description of first aid measures
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.Move out of dangerous area.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact
Wash off with soap and plenty of water. Consult a physician.
In case of eye contact
Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
If swallowed
Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a
physician.
4.2 Most important symptoms and effects, both acute and delayed
The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in section 11
4.3 Indication of any immediate medical attention and special treatment needed
No data available


SECTION 5. FIREFIGHTING MEASURES

5.1 Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
5.2 Special hazards arising from the substance or mixture
Carbon oxides, Hydrogen bromide gas, Nickel/nickel oxides, Lithium oxides
5.3 Advice for firefighters
Wear self-contained breathing apparatus for firefighting if necessary.
5.4 Further information
Use water spray to cool unopened containers.


SECTION 6. ACCIDENTAL RELEASE MEASURES

6.1 Personal precautions, protective equipment and emergency procedures
Use personal protective equipment. Avoid breathing vapors, mist or gas. Ensure adequate ventilation. Remove all
sources of ignition. Evacuate personnel to safe areas. Beware of vapors accumulating to form explosive
concentrations. Vapors can accumulate in low areas.
For personal protection see section 8.
6.2 Environmental precautions
Prevent further leakage or spillage if safe to do so. Do not let product enter drains.
6.3 Methods and materials for containment and cleaning up
Contain spillage, and then collect with an electrically protected vacuum cleaner or by wet-brushing and place in
container for disposal according to local regulations (see section 13).
6.4 Reference to other sections
For disposal see section 13.


SECTION 7. HANDLING AND STORAGE

7.1 Precautions for safe handling
Avoid contact with skin and eyes. Avoid inhalation of vapor or mist.
Use explosion-proof equipment.Keep away from sources of ignition - No smoking.Take measures to prevent the build
up of electrostatic charge.
For precautions see section 2.2.
7.2 Conditions for safe storage, including any incompatibilities
Keep container tightly closed in a dry and well-ventilated place. Containers which are opened must be carefully
resealed and kept upright to prevent leakage.
Handle and store under inert gas.
7.3 Specific end use(s)
Apart from the uses mentioned in section 1.2 no other specific uses are stipulated


SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION

8.1 Control parameters
Components with workplace control parameters
Component CAS-No. Value Control
parameters
Basis
Tetrahydrofuran 109-99-9 TWA 50.000000 ppm
USA. ACGIH Threshold Limit Values
(TLV)
Remarks Central Nervous System impairment
Upper Respiratory Tract irritation
Kidney damage
Confirmed animal carcinogen with unknown relevance to humans
Danger of cutaneous absorption
STEL 100.000000
ppm
USA. ACGIH Threshold Limit Values
(TLV)
Central Nervous System impairment
Upper Respiratory Tract irritation
Kidney damage
Confirmed animal carcinogen with unknown relevance to humans
Danger of cutaneous absorption
TWA 200.000000
ppm
590.000000
mg/m3
USA. NIOSH Recommended
Exposure Limits
ST 250.000000
ppm
735.000000
mg/m3
USA. NIOSH Recommended
Exposure Limits
TWA 200.000000
ppm
590.000000
mg/m3
USA. Occupational Exposure Limits
(OSHA) - Table Z-1 Limits for Air
Contaminants
The value in mg/m3 is approximate.
Biological occupational exposure limits
Component CAS-No. Parameters Value Biological
specimen
Basis
Tetrahydrofuran 109-99-9 Tetrahydrofur
an
2.0000
mg/l
Urine ACGIH - Biological
Exposure Indices
(BEI)
Remarks End of shift (As soon as possible after exposure ceases)
8.2 Exposure controls
Appropriate engineering controls
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of
workday.
Personal protective equipment
Eye/face protection
Face shield and safety glasses Use equipment for eye protection tested and approved under appropriate
government standards such as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without
touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after
use in accordance with applicable laws and good laboratory practices. Wash and dry hands.
Body Protection
Complete suit protecting against chemicals, Flame retardant antistatic protective clothing., The type of
protective equipment must be selected according to the concentration and amount of the dangerous substance
at the specific workplace.
Respiratory protection
Where risk assessment shows air-purifying respirators are appropriate use a full-face respirator with multipurpose
combination (US) or type AXBEK (EN 14387) respirator cartridges as a backup to engineering
controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Use respirators
and components tested and approved under appropriate government standards such as NIOSH (US) or CEN
(EU).
Control of environmental exposure
Prevent further leakage or spillage if safe to do so. Do not let product enter drains


SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES

9.1 Information on basic physical and chemical properties
a) Appearance Form: liquid
b) Odor No data available
c) Odor Threshold No data available
d) pH No data available
e) Melting point/freezing
point
No data available
f) Initial boiling point and
boiling range
67 °C (153 °F) at 1,013 hPa (760 mmHg)
g) Flash point -18 °C (0 °F) - closed cup
h) Evaporation rate No data available
i) Flammability (solid, gas) No data available
j) Upper/lower
flammability or
explosive limits
No data available
k) Vapor pressure No data available
l) Vapor density No data available
m) Relative density 1.070 g/cm3
n) Water solubility No data available
o) Partition coefficient: noctanol/
water
No data available
p) Auto-ignition
temperature
No data available
q) Decomposition
temperature
No data available
r) Viscosity No data available
s) Explosive properties No data available
t) Oxidizing properties No data available
9.2 Other safety information
No data available


SECTION 10. STABILITY AND REACTIVITY

10.1 Reactivity
No data available
10.2 Chemical stability
Stable under recommended storage conditions.
10.3 Possibility of hazardous reactions
Vapors may form explosive mixture with air.
10.4 Conditions to avoid
Heat, flames and sparks. Extremes of temperature and direct sunlight.
10.5 Incompatible materials
Oxidizing agents, Oxygen
10.6 Hazardous decomposition products
Other decomposition products - No data available
In the event of fire: see section 5


SECTION 11. TOXICOLOGICAL INFORMATION

11.1 Information on toxicological effects
Acute toxicity
No data available
Inhalation: No data available
Dermal: No data available
No data available
Skin corrosion/irritation
No data available
Serious eye damage/eye irritation
No data available
Respiratory or skin sensitisation
No data available
Germ cell mutagenicity
No data available
Carcinogenicity
IARC: No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
NTP: No component of this product present at levels greater than or equal to 0.1% is identified as a
known or anticipated carcinogen by NTP.
OSHA: No component of this product present at levels greater than or equal to 0.1% is identified as a
carcinogen or potential carcinogen by OSHA.
Reproductive toxicity
No data available
No data available
Specific target organ toxicity - single exposure
No data available
Specific target organ toxicity - repeated exposure
No data available
Aspiration hazard
No data available
Additional Information
RTECS: Not available
Central nervous system depression, narcosis, Cough, chest pain, Difficulty in breathing, Nausea, Dizziness, Headache,
Unconsciousness
Stomach - Irregularities - Based on Human Evidence
Stomach - Irregularities - Based on Human Evidence (Tetrahydrofuran)


SECTION 12. ECOLOGICAL INFORMATION

12.1 Toxicity
No data available
12.2 Persistence and degradability:
No data available
12.3 Bioaccumulative potential:
No data available
12.4 Mobility in soil:
No data available
12.5 Results of PBT and vPvB assessment:
PBT/vPvB assessment not available as chemical safety assessment not required/not conducted
12.6 Other adverse effects
No data available


SECTION 13. DISPOSAL CONSIDERATIONS

13.1 Waste treatment methods
Product
Burn in a chemical incinerator equipped with an afterburner and scrubber but exert extra care in igniting as this
material is highly flammable. Offer surplus and non-recyclable solutions to a licensed disposal company. Contact a
licensed professional waste disposal service to dispose of this material.
Contaminated packaging
Dispose of as unused product.


SECTION 14. TRANSPORT INFORMATION

DOT (US)
UN number: 1993 Class: 3 Packing group: II
Proper shipping name: Flammable liquids, n.o.s. (Tetrahydrofuran, di-Lithium tetrabromonickelate(II))
Reportable Quantity (RQ): 1220 lbs
Poison Inhalation Hazard: No
IMDG
UN number: 1993 Class: 3 Packing group: II EMS-No: F-E, S-E
Proper shipping name: FLAMMABLE LIQUID, N.O.S. (di-Lithium tetrabromonickelate(II), Tetrahydrofuran)
IATA
UN number: 1993 Class: 3 Packing group: II
Proper shipping name: Flammable liquid, n.o.s. (di-Lithium tetrabromonickelate(II), Tetrahydrofuran)


SECTION 15. REGULATORY INFORMATION

SARA 302 Components
No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302.
SARA 313 Components
This material does not contain any chemical components with known CAS numbers that exceed the threshold (De
Minimis) reporting levels established by SARA Title III, Section 313.
SARA 311/312 Hazards
Fire Hazard, Acute Health Hazard, Chronic Health Hazard
Massachusetts Right To Know Components
Tetrahydrofuran
CAS-No.
109-99-9
Revision Date
1993-04-24
Pennsylvania Right To Know Components
Tetrahydrofuran
CAS-No.
109-99-9
Revision Date
1993-04-24
di-Lithium tetrabromonickelate(II) 13826-95-4
New Jersey Right To Know Components
CAS-No. Revision Date
Tetrahydrofuran 109-99-9 1993-04-24
di-Lithium tetrabromonickelate(II) 13826-95-4
California Prop. 65 Components
This product does not contain any chemicals known to State of California to cause cancer, birth defects, or any other
reproductive harm.


SECTION 16. OTHER INFORMATION

Safety Data Sheet according to Regulation (EC) No. 1907/2006 (REACH). The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any guarantee of the properties of the product. American Elements shall not be held liable for any damage resulting from handling or from contact with the above product. See reverse side of invoice or packing slip for additional terms and conditions of sale. COPYRIGHT 1997-2018 AMERICAN ELEMENTS. LICENSED GRANTED TO MAKE UNLIMITED PAPER COPIES FOR INTERNAL USE ONLY.

About Lithium Tetrabromonickelate(II) Solution

Lithium Tetrabromonickelate(II) Solution is generally immediately available in most volumes. High purity, submicron and nanopowder forms may be considered. American Elements produces to many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia) and follows applicable ASTM testing standards. Typical and custom packaging is available. Additional technical, research and safety (MSDS) information is available as is a Reference Calculator for converting relevant units of measurement.

Lithium Tetrabromonickelate(II) Solution Synonyms

Dilithium tetrabromonickelate(II); di-Lithium tetrabromonickelate(II); Dilithium tetrabromonickelate(2-);

Chemical Identifiers

Linear Formula Li2NiBr4
MDL Number MFCD00192058
EC No. N/A
Beilstein Registry No. N/A
Pubchem CID 11047451
IUPAC Name dilithium; tetrabromonickel(2-)
SMILES [Li+].[Li+].Br[Ni-2](Br)(Br)Br
InchI Identifier InChI=1S/4BrH.2Li.Ni/h4*1H;;;/q;;;;2*+1;+2/p-4
InchI Key AVJDNPHXGKKFIA-UHFFFAOYSA-J

Packaging Specifications

Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Shipping documentation includes a Certificate of Analysis and Safety Data Sheet (SDS). Solutions are packaged in polypropylene, plastic or glass jars up to palletized 440 gallon liquid totes, and 36,000 lb. tanker trucks.

Related Elements

See more Bromine products. Bromine (atomic symbol: Br, atomic number: 35) is a Block P, Group 17, Period 4 element. Its electron configuration is [Ar]4s23d104p5. The bromine atom has a radius of 102 pm and its Van der Waals radius is 183 pm. In its elemental form, CAS 7726-95-6, bromine has a red-brown appearance. Bromine does not occur by itself in nature, it is found as colorless soluble crystalline mineral halide salts. Bromine was discovered and first isolated by Antoine Jérôme Balard and Leopold Gmelin in 1825-1826.

Lithium Bohr ModelSee more Lithium products. Lithium (atomic symbol: Li, atomic number: 3) is a Block S, Group 1, Period 2 element with an atomic weight of 6.94. The number of electrons in each of Lithium's shells is [2, 1] and its electron configuration is [He] 2s1. The lithium atom has a radius of 152 pm and a Van der Waals radius of 181 pm. Lithium was discovered by Johann Arvedson in 1817 and first isolated by William Thomas Brande in 1821. The origin of the name Lithium comes from the Greek wordlithose which means "stone." Lithium is a member of the alkali group of metals. It has the highest specific heat and electrochemical potential of any element on the period table and the lowest density of any elements that are solid at room temperature. Elemental LithiumCompared to other metals, it has one of the lowest boiling points. In its elemental form, lithium is soft enough to cut with a knife its silvery white appearance quickly darkens when exposed to air. Because of its high reactivity, elemental lithium does not occur in nature. Lithium is the key component of lithium-ion battery technology, which is becoming increasingly more prevalent in electronics.

See more Nickel products. Nickel (atomic symbol: Ni, atomic number: 28) is a Block D, Group 4, Period 4 element with an atomic weight of 58.6934. Nickel Bohr ModelThe number of electrons in each of nickel's shells is [2, 8, 16, 2] and its electron configuration is [Ar]3d8 4s2. Nickel was first discovered by Alex Constedt in 1751. The nickel atom has a radius of 124 pm and a Van der Waals radius of 184 pm. In its elemental form, nickel has a lustrous metallic silver appearance. Nickel is a hard and ductile transition metal that is considered corrosion-resistant because of its slow rate of oxidation. Elemental NickelIt is one of four elements that are ferromagnetic and is used in the production of various type of magnets for commercial use. Nickel is sometimes found free in nature but is more commonly found in ores. The bulk of mined nickel comes from laterite and magmatic sulfide ores. The name originates from the German word kupfernickel, which means "false copper" from the illusory copper color of the ore.

TODAY'S SCIENCE POST!

December 10, 2019
Los Angeles, CA
Each business day American Elements' scientists & engineers post their choice for the most exciting materials science news of the day

Artificial cells act more like the real thing