CAS #:

Linear Formula:

LiVO3

MDL Number:

MFCD00053997

EC No.:

239-124-7

ORDER

PRODUCT Product Code ORDER SAFETY DATA TECHNICAL DATA
(2N) 99% Lithium Vanadate Nanoparticles
LI-VO-02-NP
Pricing > SDS > Data Sheet >
(3N) 99.9% Lithium Vanadate Nanoparticles
LI-VO-03-NP
Pricing > SDS > Data Sheet >
(4N) 99.99% Lithium Vanadate Nanoparticles
LI-VO-04-NP
Pricing > SDS > Data Sheet >
(5N) 99.999% Lithium Vanadate Nanoparticles
LI-VO-05-NP
Pricing > SDS > Data Sheet >

Lithium Vanadate Nanoparticles Properties (Theoretical)

Compound Formula LiVO3
Molecular Weight 105.88
Appearance Yellow powder
Melting Point N/A
Boiling Point N/A
Density N/A
Solubility in H2O Soluble
Storage Temperature Ambient temperatures
Exact Mass 105.944708
Monoisotopic Mass 105.944708

Lithium Vanadate Nanoparticles Health & Safety Information

Signal Word Warning
Hazard Statements H331-H302-H319-H335
Hazard Codes Xi
Precautionary Statements P264-P270-P271-P280-P301+P312-P304+P340-P305+P351+P338-P312-P330-P501
Risk Codes 20/22-36/37
Safety Statements 9-26-36
RTECS Number N/A
Harmonized Tariff Code 2841.90
Transport Information UN 3285 6.1/PG III
WGK Germany N/A
GHS Pictograms

View and Print SDS

SAFETY DATA SHEET

Date Accessed: 04/19/2021
Date Revised: 05/15/2015

SECTION 1. IDENTIFICATION

Product Name: Lithium Vanadate Nanoparticles

Product Number: All applicable American Elements product codes, e.g. LI-VO-02-NP , LI-VO-03-NP , LI-VO-04-NP , LI-VO-05-NP

CAS #: 15060-59-0

Relevant identified uses of the substance: Scientific research and development

Supplier details:
American Elements
10884 Weyburn Ave.
Los Angeles, CA 90024
Tel: +1 310-208-0551
Fax: +1 310-208-0351

Emergency telephone number:
Domestic, North America: +1 800-424-9300
International: +1 703-527-3887


SECTION 2. HAZARDS IDENTIFICATION

Classification
This chemical is considered hazardous by the 2012 OSHA Hazard Communication Standard (29 CFR 1910.1200)
Acute oral toxicity Category 4
Acute Inhalation Toxicity - Dusts and Mists Category 4
Serious Eye Damage/Eye Irritation Category 2
Specific target organ toxicity (single exposure) Category 3
Target Organs - Respiratory system.
Label Elements

Exclamation Mark - GHS07

Signal Word
Warning
Hazard Statements
Causes serious eye irritation
May cause respiratory irritation
Harmful if swallowed or if inhaled
Precautionary Statements
Prevention
Wash face, hands and any exposed skin thoroughly after handling
Do not eat, drink or smoke when using this product
Avoid breathing dust/fume/gas/mist/vapors/spray
Use only outdoors or in a well-ventilated area
Wear eye/face protection
Inhalation
IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing
Call a POISON CENTER or doctor/physician if you feel unwell
Eyes
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing
If eye irritation persists: Get medical advice/attention
Ingestion
IF SWALLOWED: Call a POISON CENTER or doctor/physician if you feel unwell
Rinse mouth
Storage
Store in a well-ventilated place. Keep container tightly closed
Store locked up
Disposal
Dispose of contents/container to an approved waste disposal plant
Hazards not otherwise classified (HNOC)
None identified


SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS

Vanadate (VO31-), lithium
15060-59-0


SECTION 4. FIRST AID MEASURES

General Advice If symptoms persist, call a physician.
Eye Contact Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Get medical attention.
Skin Contact Wash off immediately with plenty of water for at least 15 minutes. If skin irritation persists, call a physician.
Inhalation Remove to fresh air. If not breathing, give artificial respiration. Get medical attention if
symptoms occur.
Ingestion Clean mouth with water and drink afterwards plenty of water. Get medical attention if
symptoms occur.
Most important symptoms and effects
None reasonably foreseeable.
Notes to Physician Treat symptomatically


SECTION 5. FIREFIGHTING MEASURES

Unsuitable Extinguishing Media No information available
Flash Point No information available
Method - No information available
Autoignition Temperature No information available
Explosion Limits
Upper No data available
Lower No data available
Sensitivity to Mechanical Impact No information available
Sensitivity to Static Discharge No information available
Specific Hazards Arising from the Chemical
Keep product and empty container away from heat and sources of ignition.
Hazardous Combustion Products
None known.
Protective Equipment and Precautions for Firefighters
As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear.
NFPA
Health 2
Flammability 0
Instability 0
Physical Hazards -


SECTION 6. ACCIDENTAL RELEASE MEASURES

Personal Precautions Ensure adequate ventilation. Use personal protective equipment as required. Avoid dust formation.
Environmental Precautions Should not be released into the environment. See Section 12 for additional Ecological Information.
Methods for Containment and Clean Up
Sweep up and shovel into suitable containers for disposal. Keep in suitable, closed
containers for disposal.


SECTION 7. HANDLING AND STORAGE

Handling Wear personal protective equipment/face protection. Ensure adequate ventilation. Avoid
ingestion and inhalation. Avoid dust formation. Do not get in eyes, on skin, or on clothing.
Storage Keep containers tightly closed in a dry, cool and well-ventilated place.


SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION

Eye/face Protection Wear appropriate protective eyeglasses or chemical safety goggles as described by
OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard
EN166.
Skin and body protection Wear appropriate protective gloves and clothing to prevent skin exposure.
Respiratory Protection No protective equipment is needed under normal use conditions.
Hygiene Measures
Handle in accordance with good industrial hygiene and safety practice.


SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES

Physical State Solid
Appearance Yellow
Odor No information available
Odor Threshold No information available
pH No information available
Melting Point/Range No data available
Boiling Point/Range No information available
Flash Point No information available
Evaporation Rate Not applicable
Flammability (solid,gas) No information available
Flammability or explosive limits
Upper No data available
Lower No data available
Vapor Pressure No information available
Vapor Density Not applicable
Specific Gravity No information available
Solubility No information available
Partition coefficient; n-octanol/water No data available
Autoignition Temperature No information available
Decomposition Temperature No information available
Viscosity Not applicable
Molecular Formula LiVO3
Molecular Weight 105.88


SECTION 10. STABILITY AND REACTIVITY

Reactive Hazard None known, based on information available
Stability Stable under normal conditions.
Conditions to Avoid Incompatible products.
Incompatible Materials Strong oxidizing agents
Hazardous Decomposition ProductsNone under normal use conditions
Hazardous Polymerization Hazardous polymerization does not occur.
Hazardous Reactions None under normal processing.


SECTION 11. TOXICOLOGICAL INFORMATION

Acute Toxicity
Product Information
Component Information
Toxicologically Synergistic Products
No information available
Delayed and immediate effects as well as chronic effects from short and long-term exposure
Irritation No information available
Sensitization No information available
Carcinogenicity
IARC Not listed
NTP Not listed
ACGIH Not listed
OSHA Not listed
Mexico Not listed
Mutagenic Effects No information available
Reproductive Effects No information available.
Developmental Effects No information available.
Teratogenicity No information available.
STOT - single exposure Respiratory system
STOT - repeated exposure None known
Aspiration hazard No information available
Symptoms / effects,both acute and delayed
No information available
Endocrine Disruptor Information No information available
Other Adverse Effects The toxicological properties have not been fully investigated.


SECTION 12. ECOLOGICAL INFORMATION

Ecotoxicity
Persistence and Degradability Soluble in water Persistence is unlikely based on information available.
Bioaccumulation/ Accumulation No information available.
Mobility Will likely be mobile in the environment due to its water solubility.


SECTION 13. DISPOSAL CONSIDERATIONS

Waste Disposal Methods Chemical waste generators must determine whether a discarded chemical is classified as a hazardous waste. Chemical waste generators must also consult local, regional, and national hazardous waste regulations to ensure complete and accurate classification.


SECTION 14. TRANSPORT INFORMATION

DOT
UN-No UN3285
Proper Shipping Name Vanadium compound, n.o.s.
Technical Name (Lithium vanadium oxide)
Hazard Class 6.1
Packing Group III
TDG
UN-No UN3285
Proper Shipping Name Vanadium compound, n.o.s.
Hazard Class 6.1
Packing Group III
IATA
UN-No UN3285
Proper Shipping Name Vanadium compound, n.o.s.
Hazard Class 6.1
Packing Group III
IMDG/IMO
UN-No UN3285
Proper Shipping Name Vanadium compound, n.o.s.
Hazard Class 6.1
Packing Group III


SECTION 15. REGULATORY INFORMATION

TSCA 12(b) - Notices of Export Not applicable
U.S. Federal Regulations
SARA 311/312 Hazard Categories See section 2 for more information
CWA (Clean Water Act) Not applicable
Clean Air Act Not applicable
OSHA - Occupational Safety and
Health Administration
Not applicable
CERCLA Not applicable
California Proposition 65 This product does not contain any Proposition 65 chemicals.
U.S.
U.S. Department of Transportation
Reportable Quantity (RQ): N
DOT Marine Pollutant N
DOT Severe Marine Pollutant N
U.S. Department of Homeland
Security
This product does not contain any DHS chemicals.
Other International Regulations
Mexico - Grade No information available


SECTION 16. OTHER INFORMATION

Safety Data Sheet according to Regulation (EC) No. 1907/2006 (REACH). The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any guarantee of the properties of the product. American Elements shall not be held liable for any damage resulting from handling or from contact with the above product. See reverse side of invoice or packing slip for additional terms and conditions of sale. COPYRIGHT 1997-2021 AMERICAN ELEMENTS. LICENSED GRANTED TO MAKE UNLIMITED PAPER COPIES FOR INTERNAL USE ONLY.

About Lithium Vanadate Nanoparticles

High Purity, D50 = +10 nanometer (nm) by SEMLithium Vanadate or Lithium Vanadium Oxide (LiVO) Nanoparticles, nanodots or nanopowder are spinel, high surface area particles. Nanoscale Lithium Vanadate or Lithium Vanadium Oxide Particles are typically 10 - 100 nanometers (nm) with specific surface area (SSA) in the 5 - 50 m2/g range. Nano Lithium Vanadium Oxide Particles are also available in passivated and Ultra high purity and high purity and coated and dispersed forms. They are also available as a dispersion through the AE Nanofluid production group. Nanofluids are generally defined as suspended nanoparticles in solution either using surfactant or surface charge technology. Nanofluid dispersion and coating selection technical guidance is also available. Other nanostructures include nanorods, nanowhiskers, nanohorns, nanopyramids and other nanocomposites. Surface functionalized nanoparticles allow for the particles to be preferentially adsorbed at the surface interface using chemically bound polymers. Development research is underway in Nano Electronics and Photonics materials, such as MEMS and NEMS, Bio Nano Materials, such as Biomarkers, Bio Diagnostics & Bio Sensors, and Related Nano Materials, for use in Polymers, Textiles, Fuel Cell Layers, Composites and Solar Energy materials. Nanopowders are analyzed for chemical composition by ICP, particle size distribution (PSD) by laser diffraction, and for Specific Surface Area (SSA) by BET multi-point correlation techniques. Novel nanotechnology applications also include quantum dots. High surface areas can also be achieved using solutions and using thin film by sputtering targets and evaporation technology using pellets, rod and foil. Research into applications for lithium vanadate nanocrystals has focused on developing Polymer Lithium Ion (PLI) batteries, in a composite cathode for rechargeable lithium batteries to both accelerate charge and discharge time as well as for their other potential electrical, dielectric, magnetic, optical, catalytic, biomedical and bioscience properties and for use in coatings, plastics, nanowire, nanofiber and textiles and in alloy and catalyst applications . Lithium Vanadate Nano Particles are generally immediately available in most volumes. American Elements produces to many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia) and follows applicable ASTM testing standards. Typical and custom packaging is available. Additional technical, research and safety (MSDS) information is available as is a Reference Calculator for converting relevant units of measurement.

Lithium Vanadate Nanoparticles Synonyms

Lithium vanadium oxide, Lithium oxido(dioxo)vanadium (1:1), Li2O6V2, Lithium vanadium trioxide, Lithium metavanadate

Chemical Identifiers

Linear Formula LiVO3
MDL Number MFCD00053997
EC No. 239-124-7
Pubchem CID 23709771
IUPAC Name lithium; oxido(dioxo)vanadium
SMILES [Li+].[O-][V](=O)=O
InchI Identifier InChI=1S/Li.3O.V/q+1;;;-1;
InchI Key RFTQTGQBTZMPCM-UHFFFAOYSA-N

Packaging Specifications

Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Shipping documentation includes a Certificate of Analysis and Safety Data Sheet (SDS). Solutions are packaged in polypropylene, plastic or glass jars up to palletized 440 gallon liquid totes, and 36,000 lb. tanker trucks.

Related Elements

Lithium Bohr ModelSee more Lithium products. Lithium (atomic symbol: Li, atomic number: 3) is a Block S, Group 1, Period 2 element with an atomic weight of 6.94. The number of electrons in each of Lithium's shells is [2, 1] and its electron configuration is [He] 2s1. The lithium atom has a radius of 152 pm and a Van der Waals radius of 181 pm. Lithium was discovered by Johann Arvedson in 1817 and first isolated by William Thomas Brande in 1821. The origin of the name Lithium comes from the Greek wordlithose which means "stone." Lithium is a member of the alkali group of metals. It has the highest specific heat and electrochemical potential of any element on the period table and the lowest density of any elements that are solid at room temperature. Elemental LithiumCompared to other metals, it has one of the lowest boiling points. In its elemental form, lithium is soft enough to cut with a knife its silvery white appearance quickly darkens when exposed to air. Because of its high reactivity, elemental lithium does not occur in nature. Lithium is the key component of lithium-ion battery technology, which is becoming increasingly more prevalent in electronics.

See more Vanadium products. Vanadium (atomic symbol: V, atomic number: 23) is a Block D, Group 5, Period 4 element with an atomic weight of 50.9415. Vanadium Bohr ModelThe number of electrons in each of Vanadium's shells is 2, 8, 11, 2 and its electron configuration is [Ar] 3d3 4s2. The vanadium atom has a radius of 134 pm and a Van der Waals radius of 179 pm. Vanadium was discovered by Andres Manuel del Rio in 1801 and first isolated by Nils Gabriel Sefström in 1830. In its elemental form, vanadium has a bluish-silver appearance. Elemental VanadiumIt is a hard, ductile transition metal that is primarily used as a steel additive and in alloys such as Titanium-6AL-4V, which is composed of titanium, aluminum, and vanadium and is the most common titanium alloy commercially produced. Vanadium is found in fossil fuel deposits and 65 different minerals. Vanadium is not found free in nature; however, once isolated it forms an oxide layer that stabilizes the free metal against further oxidation. Vanadium was named after the word "Vanadis" meaning goddess of beauty in Scandinavian mythology.

TODAY'S SCIENCE POST!

April 19, 2021
Los Angeles, CA
Each business day American Elements' scientists & engineers post their choice for the most exciting materials science news of the day

New method expands the world of small RNAs