Skip to main content

Molybdenum Concentrate

CAS #: 7439-98-7
Linear Formula:
Mo
MDL Number
MFCD00003465
EC No.:
231-107-2

ORDER

Product Product Code ORDER SAFETY DATA Technical data
(2N) 99% Molybdenum Concentrate MO-M-02-CONC SDS > Data Sheet >
(3N) 99.9% Molybdenum Concentrate MO-M-03-CONC SDS > Data Sheet >
(4N) 99.99% Molybdenum Concentrate MO-M-04-CONC SDS > Data Sheet >
(5N) 99.999% Molybdenum Concentrate MO-M-05-CONC SDS > Data Sheet >
WHOLESALE/SKU 0000-742-{{nid}}

Molybdenum Concentrate Properties (Theoretical)

Molecular Weight 95.94
Appearance Silvery
Melting Point 2623 °C
Boiling Point 4639 °C
Density 10280 kg/m3
Solubility in H2O N/A
Poisson's Ratio 0.31
Young's Modulus 329 GPa
Vickers Hardness 1530 MPa
Tensile Strength N/A
Thermal Conductivity 1.38 W/cm/K @ 298.2 K
Thermal Expansion (25 °C) 4.8 µm·m-1·K-1
Electrical Resistivity 5.2 microhm-cm @ 0 °C
Electronegativity 1.9 Paulings
Specific Heat 0.0599 Cal/g/K @ 25 °C
Heat of Fusion 6.6 Cal/gm mole
Heat of Vaporization 128 K-Cal/gm atom at 4612 °C

Molybdenum Concentrate Health & Safety Information

Signal Word N/A
Hazard Statements N/A
Hazard Codes N/A
Precautionary Statements N/A
Flash Point Not applicable
Risk Codes N/A
Safety Statements N/A
RTECS Number QA4680000
Transport Information NONH
WGK Germany nwg

About Molybdenum Concentrate

Molybdenum ConcentrateAmerican Elements offers molybdenum concentrate with a majority molybdenum base component. Preparation of molybdenum concentrate typically involves the removal of water from an molybdenum solution. American Elements specializes in producing high purity Molybdenum Concentrate with the smallest possible average grain sizes for use in preparation of pressed and bonded sputtering targets and in Chemical Vapor Deposition (CVD) and Physical Vapor Deposition (PVD) processes including Thermal and Electron Beam (E-Beam) Evaporation, Low Temperature Organic Evaporation, Atomic Layer Deposition (ALD), Metallic-Organic and Chemical Vapor Deposition (MOCVD). Molybdenum concentrate is similar to powder in that it is made up of minute, dry particles of pure substance. Concentrate is also useful in any application where high surface areas are desired such as water treatment and in fuel cell and solar applications. Nanoparticles also produce very high surface areas. Our standard Concentrate particle sizes average in the range of - 325 mesh, - 100 mesh, 10-50 microns and submicron ( 1 micron). We can also provide many materials in the nanoscale range. American Elements produces to many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia)and follows applicable ASTM testing standards. Typical and custom packaging is available. We also produce Molybdenum as rod, ingot, pieces, pellets, disc, granules, wire, and in compound forms, such as oxide. Other shapes are available by request. Molybdenum concentrate is advantageous for transportation since it reduces weight and volume. A solution can be reproduced at the time of usage with the addition of a solvent.

Synonyms

Moly

Chemical Identifiers

Linear Formula Mo
Pubchem CID 23932
MDL Number MFCD00003465
EC No. 231-107-2
Beilstein/Reaxys No. N/A
SMILES [Mo]
InchI Identifier InChI=1S/Mo
InchI Key ZOKXTWBITQBERF-UHFFFAOYSA-N
Chemical Formula
Molecular Weight
Standard InchI
Appearance
Melting Point
Boiling Point
Density

Packaging Specifications

Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Shipping documentation includes a Certificate of Analysis and Safety Data Sheet (SDS). Solutions are packaged in polypropylene, plastic or glass jars up to palletized 440 gallon liquid totes, and 36,000 lb. tanker trucks.

Related Elements

See more Molybdenum products. Molybdenum (atomic symbol: Mo, atomic number: 42) is a Block D, Group 6, Period 5 element with an atomic weight of 95.96. Molybdenum Bohr ModelThe number of electrons in each of molybdenum's shells is [2, 8, 18, 13, 1] and its electron configuration is [Kr] 4d5 5s1. The molybdenum atom has a radius of 139 pm and a Van der Waals radius of 209 pm. In its elemental form, molybdenum has a gray metallic appearance. Molybdenum was discovered by Carl Wilhelm in 1778 and first isolated by Peter Jacob Hjelm in 1781. Molybdenum is the 54th most abundant element in the earth's crust. Elemental MolybdenumIt has the third highest melting point of any element, exceeded only by tungsten and tantalum. Molybdenum does not occur naturally as a free metal, it is found in various oxidation states in minerals. The primary commercial source of molybdenum is molybdenite, although it is also recovered as a byproduct of copper and tungsten mining. The origin of the name Molybdenum comes from the Greek word molubdos meaning lead.