Ultra Dry Sodium Chloride

CAS #:

Linear Formula:

NaCl

MDL Number:

MFCD00003477

EC No.:

231-598-3

ORDER

PRODUCT Product Code ORDER SAFETY DATA TECHNICAL DATA
(2N) 99% Ultra Dry Sodium Chloride
NA-CL-02-P.UD
Pricing > SDS > Data Sheet >
(3N) 99.9% Ultra Dry Sodium Chloride
NA-CL-03-P.UD
Pricing > SDS > Data Sheet >
(4N) 99.99% Ultra Dry Sodium Chloride
NA-CL-04-P.UD
Pricing > SDS > Data Sheet >
(5N) 99.999% Ultra Dry Sodium Chloride
NA-CL-05-P.UD
Pricing > SDS > Data Sheet >

Ultra Dry Sodium Chloride Properties (Theoretical)

Compound Formula ClNa
Molecular Weight 58.44
Appearance Colorless crystals
Melting Point 801° C (1,474° F)
Boiling Point 1,413° C (2,575° F)
Density 2.16 g/cm3
Solubility in H2O N/A
Exact Mass 57.9586 g/mol
Monoisotopic Mass 57.958622 Da

Ultra Dry Sodium Chloride Health & Safety Information

Signal Word N/A
Hazard Statements N/A
Hazard Codes N/A
Precautionary Statements N/A
Flash Point Not applicable
Risk Codes N/A
Safety Statements N/A
RTECS Number VZ4725000
Transport Information NONH for all modes of transport
WGK Germany 1

View and Print SDS

SAFETY DATA SHEET

Date Accessed: 04/19/2024
Date Revised:01/15/2022

SECTION 1. IDENTIFICATION

Product Name: Ultra Dry Sodium Chloride

Product Number: All applicable American Elements product codes, e.g. NA-CL-02-P.UD , NA-CL-03-P.UD , NA-CL-04-P.UD , NA-CL-05-P.UD

CAS #: 7647-14-5

Relevant identified uses of the substance: Scientific research and development

Supplier details:
American Elements
10884 Weyburn Ave.
Los Angeles, CA 90024
Tel: +1 310-208-0551
Fax: +1 310-208-0351

Emergency telephone number:
Domestic, North America: +1 800-424-9300
International: +1 703-527-3887


SECTION 2. HAZARDS IDENTIFICATION

Not classified as dangerous according to EC directives.


SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS

COMPONENT NAME CAS No. % CLASS HEALTH RISK UN No.
Sodium Chloride 7647-14-5 100% N.R. N.R. None -


SECTION 4. FIRST AID MEASURES

GENERAL: Consult a Physician for specific advice
EYES: Irrigate thoroughly with water, if discomfort persists obtain medical attention.
SKIN: Wash off thoroughly with soap and water.
INHALATION: Remove from exposure, rest and keep warm. In severe cases seek medical attention.
INGESTION: Wash out mouth thoroughly with water. Induce vomiting if conscious. Obtain medical attention.


SECTION 5. FIREFIGHTING MEASURES

FLASH POINT: Not Ignitable. Not Applicable
AUTO IGNITION TEMP: Not Applicable
EXTINGUISHING MEDIA: Not Applicable
UNUSUAL FIRE HAZARDS: May evolve toxic fumes in a fire.


SECTION 6. ACCIDENTAL RELEASE MEASURES

CONTAMINATION CLEANUP: Wear suitable protective clothing & equipment as listed under Exposure / Personal protection. Mix with sand, transfer carefully to
container and arrange removal by disposal company. Wash site of spillage thoroughly with water and detergent. For large spillages liquids should be contained with
sand or earth and both liquids and solids transfered to salvage containers. Any residues should be treated as for small spillages.


SECTION 7. HANDLING AND STORAGE

USAGE PRECAUTIONS: No special precautions
STORAGE PRECAUTIONS: Store at room temperature (15 to 25°C recommended). Keep well closed and protected from moisture.


SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION

Protective gloves made of polyvinyl alcohol (PVA) are required. Use of a laboratory coat is suggested. Safety goggles or safety glasses with side shields are required if
there is any possibility of chipping or dust creation. Respirators must be worn when the threshold limit is exceeded. Provide adequate general mechanical ventilation, and
local exhaust ventilation. When handling quantities of this material, be sure to wear appropriate protective equipment as described. Eye wash should be readily available.
Wash thoroughly after handling. Do not take internally. Avoid breathing dust when generated. For persons with sensitive existing medical conditions, medical advice
should be sought before employing on tasks involving exposure to this material.
EXPOSURE LIMITS OES, not assigned (Long term, 8 hour TWA)


SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES

APPEARANCE : Clear transparent crystalline pieces
pH IN AQUEOUS SOLUTION: No data available
BOILING POINT (760mm Hg) 1461°C
MELTING POINT: 800°C
FLASH POINT: Not Applicable
FLAMMABILITY: Not Applicable
EXPLOSIVE PROPERTIES: Not Applicable
SPECIFIC GRAVITY: 2.17
Vapor PRESSURE: Not Applicable
SOLUBILITY IN WATER: Very soluble (35.7g/100g water at 0°C)


SECTION 10. STABILITY AND REACTIVITY

STABILITY: Stable under normal conditions of storage or use.
HAZARDOUS DECOMPOSITION: No data.
MATERIALS TO AVOID: Strong Acids


SECTION 11. TOXICOLOGICAL INFORMATION

TOXIC DOSE - LD50 3000mg/kg oral, rat.
CARCINOGENICITY No evidence of carcinogenic properties.
MUTAGENICITY/TERATOGENICITY No evidence of mutagenic effects.
TOXICOLOGICAL FINDINGS No evaluation of toxicological data is available.


SECTION 12. ECOLOGICAL INFORMATION

No environmental hazard is anticipated provided that the material is handled and disposed of with due care and attention.


SECTION 13. DISPOSAL CONSIDERATIONS

DISPOSAL METHODS: Non hazardous and non-regulated solid waste. Contact your local waste disposal authority for advice, or pass to a chemical disposal
company.


SECTION 14. TRANSPORT INFORMATION

CLASSIFICATION: Not classified as dangerous according to EC directives EC-No.:231-598-3
LABEL FOR SUPPLY: None
RISK PHRASES: None
SAFETY PHRASES: None


SECTION 15. REGULATORY INFORMATION

N/A


SECTION 16. OTHER INFORMATION

Safety Data Sheet according to Regulation (EC) No. 1907/2006 (REACH). The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any guarantee of the properties of the product. American Elements shall not be held liable for any damage resulting from handling or from contact with the above product. See reverse side of invoice or packing slip for additional terms and conditions of sale. COPYRIGHT 1997-2022 AMERICAN ELEMENTS. LICENSED GRANTED TO MAKE UNLIMITED PAPER COPIES FOR INTERNAL USE ONLY.

About Ultra Dry Sodium Chloride

Chloride IonAmerican Elements specializes in producing Sodium Chloride in an ultra dry form for use as a compound in semiconductors and other high purity applications. Ultra Dry Sodium Chloride is High Purity Sodium Chloridegenerally immediately available in most volumes. High purity, submicron and nanopowder forms may be considered. American Elements produces to many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia) and follows applicable ASTM testing standards. Typical and custom packaging is available. Additional technical, research and safety (MSDS) information is available as is a Reference Calculator for converting relevant units of measurement.

Ultra Dry Sodium Chloride Synonyms

Halite, Salt, Sodium Monochloride, Common salt, Rock salt, Table salt

Chemical Identifiers

Linear Formula NaCl
MDL Number MFCD00003477
EC No. 231-598-3
Beilstein/Reaxys No. 3534976
Pubchem CID 5234
IUPAC Name Sodium Chloride
SMILES [Na+].[Cl-]
InchI Identifier InChI=1S/ClH.Na/h1H;/q;+1/p-1
InchI Key FAPWRFPIFSIZLT-UHFFFAOYSA-M

Packaging Specifications

Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Shipping documentation includes a Certificate of Analysis and Safety Data Sheet (SDS). Solutions are packaged in polypropylene, plastic or glass jars up to palletized 440 gallon liquid totes, and 36,000 lb. tanker trucks.

Related Elements

Sodium

Sodium Bohr ModelSee more Sodium products. Sodium (atomic symbol: Na, atomic number: 11) is a Block D, Group 5, Period 4 element with an atomic weight of 22.989769. The number of electrons in each of Sodium's shells is [2, 8, 1] and its electron configuration is [Ne] 3s1. The sodium atom has a radius of 185.8 pm and a Van der Waals radius of 227 pm. Sodium was discovered and first isolated by Sir Humphrey Davy in 1807. In its elemental form, sodium has a silvery-white metallic appearance. It is the sixth most abundant element, making up 2.6 % of the earth's crust. Sodium does not occur in nature as a free element and must be extracted from its compounds (e.g., feldspars, sodalite, and rock salt). The name Sodium is thought to come from the Arabic word suda, meaning "headache" (due to sodium carbonate's headache-alleviating properties), and its elemental symbol Na comes from natrium, its Latin name.

Chlorine

Chlorine is a Block P, Group 17, Period 3 element. Its electron configuration is [Ne]3s23p5. The chlorine atom has a covalent radius of 102±4 pm and its Van der Waals radius is 175 pm. Chlorine ModelIn its elemental form, chlorine is a yellow-green gas. Chlorine is the second lightest halogen after fluorine. It has the third highest electronegativity and the highest electron affinity of all elements, making it a strong oxidizing agent. It is rarely found by itself in nature. Chlorine was discovered and first isolated by Carl Wilhelm Scheele in 1774. It was first recognized as an element by Humphry Davy in 1808.

TODAY'S TOP DISCOVERY!

April 19, 2024
Los Angeles, CA
Each business day American Elements' scientists & engineers post their choice for the most exciting materials science news of the day
Researchers develop enzymatic cocktail that can kill tuberculosis-causing mycobacteria

Researchers develop enzymatic cocktail that can kill tuberculosis-causing mycobacteria