Niobium Tin Powder | Safety Data Sheet (SDS)

SAFETY DATA SHEET

Date Accessed: 03/28/2024
Date Revised: 01/15/2022

SECTION 1. IDENTIFICATION

Product Name: Niobium Tin Powder

Product Number: All applicable American Elements product codes, e.g. NB-SN-01-P

CAS #: 12035-04-0

Relevant identified uses of the substance: Scientific research and development

Supplier details:
American Elements
10884 Weyburn Ave.
Los Angeles, CA 90024
Tel: +1 310-208-0551
Fax: +1 310-208-0351

Emergency telephone number:
+1 800-424-9300


SECTION 2. HAZARDS IDENTIFICATION

2.1 Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008
GHS02 flame
Flam. Sol. 2 H228 Flammable solid.
GHS07
Skin Irrit. 2 H315 Causes skin irritation.
Eye Irrit. 2 H319 Causes serious eye irritation.
STOT SE 3 H335 May cause respiratory irritation.
Classification according to Directive 67/548/EEC or Directive 1999/45/EC
Xi; Irritant
R36/37/38: Irritating to eyes, respiratory system and skin.
F; Highly flammable
R11: Highly flammable.
Information concerning particular hazards for human and environment: N/A
Other hazards that do not result in classification No data available
2.2 Label elements
Labelling according to Regulation (EC) No 1272/2008 The substance is classified and labelled according to the CLP regulation.
Hazard pictograms

Flame - GHS02 Exclamation Mark - GHS07

GHS02 GHS07
Signal word Warning
Hazard statements
H228 Flammable solid.
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H335 May cause respiratory irritation.
Precautionary statements
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P261 Avoid breathing dust/fume/gas/mist/vapors/spray.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P405 Store locked up.
P501 Dispose of contents/container in accordance with local/regional/national/international regulations.
2.3 Other hazards
Results of PBT and vPvB assessment
PBT: N/A
vPvB: N/A


SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS

3.1 Substances
CAS# Designation:
12035-04-0 Niobium tin powder


SECTION 4. FIRST AID MEASURES

4.1 Description of first aid measures
If inhaled:
Supply patient with fresh air. If not breathing, provide artificial respiration. Keep patient warm. Consult doctor if symptoms persist.
Seek immediate medical advice.
In case of skin contact:
Instantly wash with water and soap and rinse thoroughly.
Seek immediate medical advice.
In case of eye contact:
Rinse opened eye for several minutes under running water. Then consult doctor.
If swallowed:
Seek medical treatment.
4.2 Most important symptoms and effects, both acute and delayed:
No data available
4.3 Indication of any immediate medical attention and special treatment needed:
No data available


SECTION 5. FIREFIGHTING MEASURES

5.1 Extinguishing media
Suitable extinguishing agents Special powder for metal fires. Do not use water.
For safety reasons unsuitable extinguishing agents Water.
5.2 Special hazards arising from the substance or mixture If this product is involved in a fire, the following can be released:
5.3 Advice for firefighters
Protective equipment:
Wear self-contained breathing apparatus.
Wear full protective suit.


SECTION 6. ACCIDENTAL RELEASE MEASURES

6.1 Personal precautions, protective equipment and emergency procedures
Use personal protective equipment. Keep unprotected persons away.
Ensure adequate ventilation
Keep away from ignition sources
6.2 Environmental precautions: Do not allow material to be released to the environment without official permits.
6.3 Methods and materials for containment and cleanup:
Keep away from ignition sources.
Ensure adequate ventilation.
Prevention of secondary hazards: Keep away from ignition sources.
6.4 Reference to other sections
See Section 7 for information on safe handling
See section 8 for information on personal protection equipment.
See Section 13 for information on disposal.


SECTION 7. HANDLING AND STORAGE

7.1 Precautions for safe handling
Keep containers tightly sealed.
Store in cool, dry place in tightly closed containers.
Ensure good ventilation/exhaustion at the workplace.
Information about protection against explosions and fires: Protect against electrostatic charges.
7.2 Conditions for safe storage, including any incompatibilities
Requirements to be met by storerooms and containers: Store in cool location.
Information about storage in one common storage facility: Store away from oxidising agents.
Further information about storage conditions:
Keep container tightly sealed.
Store in cool, dry conditions in well-sealed containers.
7.3 Specific end use(s) No data available


SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION

Additional information about design of technical systems:
Properly operating chemical fume hood designed for hazardous chemicals and having an average face velocity of at least 100 feet per minute.
8.1 Control parameters
Components with critical values that require monitoring at the workplace:
Tin metal, oxide and inorganic compounds, except tin hydride, as Sn
mg/m3
ACGIH TLV 2
Austria MAK 2
Belgium TWA 2
Denmark TWA 2
Finland TWA 2
Germany MAK 2
Hungary TWA 1; 2-STEL (skin)
Korea TLV 2
Netherlands MAC-TGG 2
Norway TWA 1
Poland TWA 2
Switzerland MAK-W 2; 4-KZG-W
United Kingdom TWA 2; 4-STEL
USA PEL 2
Additional information: No data
8.2 Exposure controls
Personal protective equipment
General protective and hygienic measures
The usual precautionary measures should be adhered to in handling the chemicals.
Keep away from foodstuffs, beverages and food.
Instantly remove any soiled and impregnated garments.
Wash hands during breaks and at the end of the work.
Avoid contact with the eyes and skin.
Maintain an ergonomically appropriate working environment.
Breathing equipment: Use breathing protection with high concentrations.
Protection of hands:
Inspect gloves prior to use.
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer.
Material of gloves Impervious gloves
Eye protection:
Safety glasses
Face protection
Body protection: Protective work clothing.


SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES

9.1 Information on basic physical and chemical properties
Appearance:
Form: Powder or solid in various forms
Colour: Silver grey
Smell: Odorless
Odor threshold: No data available.
pH: N/A
Melting point/Melting range: 2100 °C
Boiling point/Boiling range: No data available
Sublimation temperature / start: No data available
Flash point: N/A
Inflammability (solid, gas) Highly flammable.
Ignition temperature: No data available
Decomposition temperature: No data available
Self-inflammability: No data available.
Danger of explosion: No data available.
Critical values for explosion:
Lower: No data available
Upper: No data available
Steam pressure: N/A
Density No data available
Relative density No data available.
Vapor density N/A
Evaporation rate N/A
Solubility in / Miscibility with
Water: Insoluble
Partition coefficient (n-octanol/water): No data available.
Viscosity:
Dynamic: N/A
Kinematic: N/A
9.2 Other information No data available


SECTION 10. STABILITY AND REACTIVITY

10.1 Reactivity No data available
10.2 Chemical stability Stable under recommended storage conditions.
Thermal decomposition / conditions to be avoided: No decomposition if used and stored according to specifications.
10.3 Possibility of hazardous reactions No dangerous reactions known
10.4 Conditions to avoid No data available
10.5 Incompatible materials: Oxidising agents
10.6 Hazardous decomposition products: Metal oxide


SECTION 11. TOXICOLOGICAL INFORMATION

11.1 Information on toxicological effects
Acute toxicity: No effects known.
LD/LC50 values that are relevant for classification: No data
Skin irritation or corrosion: Causes skin irritation.
Eye irritation or corrosion: Causes serious eye irritation.
Sensitization: No sensitizing effect known.
Germ cell mutagenicity: No effects known.
Carcinogenicity: No classification data on carcinogenic properties of this material is available from the EPA, IARC, NTP, OSHA or ACGIH.
Reproductive toxicity: No effects known.
Specific target organ system toxicity - repeated exposure: No effects known.
Specific target organ system toxicity - single exposure: May cause respiratory irritation.
Aspiration hazard: No effects known.
Subacute to chronic toxicity: No effects known.
Additional toxicological information: To the best of our knowledge the acute and chronic toxicity of this substance is not fully known.


SECTION 12. ECOLOGICAL INFORMATION

12.1 Toxicity
Aquatic toxicity: No data available
12.2 Persistence and degradability No data available
12.3 Bioaccumulative potential No data available
12.4 Mobility in soil No data available
Additional ecological information:
Do not allow material to be released to the environment without official permits.
Generally not hazardous for water.
Avoid transfer into the environment.
12.5 Results of PBT and vPvB assessment
PBT: N/A
vPvB: N/A
12.6 Other adverse effects No data available


SECTION 13. DISPOSAL CONSIDERATIONS

13.1 Waste treatment methods
Recommendation
Hand over to disposers of hazardous waste.
Must be specially treated under adherence to official regulations.
Consult official regulations for proper disposal.
Uncleaned packagings:
Recommendation: Disposal must be made according to official regulations.


SECTION 14. TRANSPORT INFORMATION

UN-Number
ADR, IMDG, IATA UN3089
14.2 UN proper shipping name
ADR 3089 METAL POWDER, FLAMMABLE, N.O.S. (Niobium tin powder)
IMDG, IATA METAL POWDER, FLAMMABLE, N.O.S. (Niobium tin powder)
14.3 Transport hazard class(es)
ADR
Class 4.1 (F3) Flammable solids, self-reactive substances and solid desensitised
explosives.
Label 4.1
IMDG, IATA
Class 4.1 Flammable solids, self-reactive substances and solid desensitised
explosives.
Label 4.1
Packing group
ADR, IMDG, IATA III
14.5 Environmental hazards: N/A
14.6 Special precautions for user Warning: Flammable solids, self-reactive substances and solid desensitised
explosives.
Kemler Number: 40
Segregation groups Heavy metals and their salts (including their organometallic compounds),
powdered metals
14.7 Transport in bulk according to Annex II of MARPOL73/78 and the IBC
Code N/A
Transport/Additional information:
ADR
Excepted quantities (EQ): E1
Limited quantities (LQ) 5 kg
Transport category 3
Tunnel restriction code E
UN "Model Regulation": UN3089, METAL POWDER, FLAMMABLE, N.O.S. (Niobium tin powder), 4.1, III


SECTION 15. REGULATORY INFORMATION

15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture
Australian Inventory of Chemical Substances Substance is not listed.
Standard for the Uniform Scheduling of Drugs and Poisons Substance is not listed.
National regulations
Information about limitation of use:
Employment restrictions concerning young persons must be observed.
For use only by technically qualified individuals.
Water hazard class: Generally not hazardous for water.
Other regulations, limitations and prohibitive regulations
ELINCS (European List of Notified Chemical Substances) Substance is not listed.
Substance of Very High Concern (SVHC) according to the REACH Regulations (EC) No. 1907/2006. Substance is not listed.
The conditions of restrictions according to Article 67 and Annex XVII of the Regulation (EC) No 1907/2006 (REACH) for the manufacturing, placing on
the market and use must be observed.
Substance is not listed.
Annex XIV of the REACH Regulations (requiring Authorisation for use) Substance is not listed.
15.2 Chemical safety assessment: A Chemical Safety Assessment has not been carried out.