Role of Nanostructuring and Microstructuring in Silver Antimony Telluride Compounds for Thermoelectric Applications.

Title Role of Nanostructuring and Microstructuring in Silver Antimony Telluride Compounds for Thermoelectric Applications.
Authors O. Cojocaru-Miredin; L. Abdellaoui; M. Nagli; S. Zhang; Y. Yu; C. Scheu; D. Raabe; M. Wuttig; Y. Amouyal
Journal ACS Appl Mater Interfaces
DOI 10.1021/acsami.7b00689
Abstract

Thermoelectric (TE) materials are of utmost significance for conversion of heat flux into electrical power in the low-power regime. Their conversion efficiency depends strongly on the microstructure. AgSbTe2-based compounds are high-efficiency TE materials suitable for the mid-temperature range. Herein, we explore an Ag16.7Sb30Te53.3 alloy (at %) subjected to heat treatments at 380 °C for different durations aimed at nucleation and coarsening of Sb2Te3-precipitates. To characterize the Sb2Te3-precipitation, we use a set of methods combining thermal and electrical measurements in concert with transmission electron microscopy and atom probe tomography. We find correlations between the measured TE transport coefficients and the applied heat treatments. Specifically, the lowest electrical and thermal conductivity values are obtained for the as-quenched state, whereas the highest values are observed for alloys aged for 8 h. In turn, long-term heat treatments result in intermediate values of transport coefficients. We explain these findings in terms of interplay between precipitate formation and variations in the matrix composition, highlighting the importance of thermal stability of the material under service conditions.

Citation O. Cojocaru-Miredin; L. Abdellaoui; M. Nagli; S. Zhang; Y. Yu; C. Scheu; D. Raabe; M. Wuttig; Y. Amouyal.Role of Nanostructuring and Microstructuring in Silver Antimony Telluride Compounds for Thermoelectric Applications.. ACS Appl Mater Interfaces. 2017;9(17):1477914790. doi:10.1021/acsami.7b00689

Related Elements

Antimony

See more Antimony products. Antimony (atomic symbol: Sb, atomic number: 51) is a Block P, Group 15, Period 5 element with an atomic radius of 121.760. Antimony Bohr Model The number of electrons in each of antimony's shells is 2, 8, 18, 18, 5 and its electron configuration is [Kr] 4d10 5s2 5p3. The antimony atom has a radius of 140 pm and a Van der Waals radius of 206 pm. Antimony was discovered around 3000 BC and first isolated by Vannoccio Biringuccio in 1540 AD. In its elemental form, antimony has a silvery lustrous gray appearance. Elemental Antimony The most common source of antimony is the sulfide mineral known as stibnite (Sb2S3), although it sometimes occurs natively as well. Antimony has numerous applications, most commonly in flame-retardant materials. It also increases the hardness and strength of lead when combined in an alloy and is frequently employed as a dopant in semiconductor materials. Its name is derived from the Greek words anti and monos, meaning a metal not found by itself.

Silver

See more Silver products. Silver (atomic symbol: Ag, atomic number: 47) is a Block D, Group 11, Period 5 element with an atomic weight of 107.8682. Silver Bohr ModelThe number of electrons in each of Silver's shells is 2, 8, 18, 18, 1 and its electron configuration is [Kr]4d10 5s1. The silver atom has a radius of 144 pm and a Van der Waals radius of 203 pm. Silver was first discovered by Early Man prior to 5000 BC. In its elemental form, silver has a brilliant white metallic luster. Elemental SilverIt is a little harder than gold and is very ductile and malleable, being exceeded only by gold and perhaps palladium. Pure silver has the highest electrical and thermal conductivity of all metals and possesses the lowest contact resistance. It is stable in pure air and water, but tarnishes when exposed to ozone, hydrogen sulfide, or air containing sulfur. It is found in copper, copper-nickel, lead, and lead-zinc ores, among others. Silver was named after the Anglo-Saxon word "seolfor" or "siolfur," meaning 'silver'.

Tellurium

See more Tellurium products. Tellurium (atomic symbol: Te, atomic number: 52) is a Block P, Group 16, Period 5 element with an atomic radius of 127.60. Tellurium Bohr ModelThe number of electrons in each of tellurium's shells is 2, 8, 18, 18, 6 and its electron configuration is [Kr] 4d10 5s2 5p4. Tellurium was discovered by Franz Muller von Reichenstein in 1782 and first isolated by Martin Heinrich Klaproth in 1798. In its elemental form, tellurium has a silvery lustrous gray appearance. The tellurium atom has a radius of 140 pm and a Van der Waals radius of 206 pm. Elemental TelluriumTellurium is most commonly sourced from the anode sludges produced as a byproduct of copper refining. The name Tellurium originates from the Greek word Tellus, meaning Earth.

Related Forms & Applications