Silicomolybdic Acid Hydrate

CAS #:

Linear Formula:

H4SiO4 • 12MoO3 • xH2O

MDL Number:

MFCD00150575

EC No.:

N/A

ORDER

PRODUCT Product Code ORDER SAFETY DATA TECHNICAL DATA
(2N) 99% Silicomolybdic Acid Hydrate
SIHMO-H-02-C.XHYD
Pricing > SDS > Data Sheet >
(3N) 99.9% Silicomolybdic Acid Hydrate
SIHMO-H-03-C.XHYD
Pricing > SDS > Data Sheet >
(4N) 99.99% Silicomolybdic Acid Hydrate
SIHMO-H-04-C.XHYD
Pricing > SDS > Data Sheet >
(5N) 99.999% Silicomolybdic Acid Hydrate
SIHMO-H-05-C.XHYD
Pricing > SDS > Data Sheet >

Silicomolybdic Acid Hydrate Properties (Theoretical)

Compound Formula H6Mo12O41Si
Molecular Weight 1841.39
Appearance Yellow to green to brown crystals
Melting Point N/A
Boiling Point N/A
Density 1.156 g/mL
Solubility in H2O N/A
Exact Mass N/A
Monoisotopic Mass 1864.680298

Silicomolybdic Acid Hydrate Health & Safety Information

Signal Word Warning
Hazard Statements H315-H319-H331-H335
Hazard Codes Xi
Precautionary Statements P262-P280-P304+P340-P305+P351+P338-P403+P233-P501
Risk Codes 36/37/38
Safety Statements 26
RTECS Number N/A
Transport Information N/A
WGK Germany 3
GHS Pictograms

View and Print SDS

SAFETY DATA SHEET

Date Accessed: 03/29/2024
Date Revised:01/15/2022

SECTION 1. IDENTIFICATION

Product Name: Silicomolybdic Acid Hydrate

Product Number: All applicable American Elements product codes, e.g. SIHMO-H-02-C.XHYD , SIHMO-H-03-C.XHYD , SIHMO-H-04-C.XHYD , SIHMO-H-05-C.XHYD

CAS #: 11089-20-6

Relevant identified uses of the substance: Scientific research and development

Supplier details:
American Elements
10884 Weyburn Ave.
Los Angeles, CA 90024
Tel: +1 310-208-0551
Fax: +1 310-208-0351

Emergency telephone number:
Domestic, North America: +1 800-424-9300
International: +1 703-527-3887


SECTION 2. HAZARDS IDENTIFICATION

Classification of the substance or mixtured
GHS07
Skin Irrit. 2 H315 Causes skin irritation.
Eye Irrit. 2A H319 Causes serious eye irritation.
STOT SE 3H335 May cause respiratory irritation.
Label elements·
GHS label elements
The substance is classified and labeled according to the Globally Harmonized System (GHS). Hazard pictograms

Exclamation Mark - GHS07

GHS07·
Signal word Warning·
Hazard-determining components of labeling:12-Molybdosilicic acid hydrate·
Hazard statements
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H335 May cause respiratory irritation.·
Precautionary statements
P262 Do not get in eyes, on skin, or on clothing.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P305+P351+P338 If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if presentand easy to do. Continue rinsing.
P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.


SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS

Chemical characterization: Substances·
CAS No. 11089-20-6
Description 12-Molybdosilicic acid hydrate


SECTION 4. FIRST AID MEASURES

Description of first aid measures·
After inhalation: In case of unconsciousness place patient stably in side position for transportation.After skin contact: Immediately wash with water and soap and rinse thoroughly.
After eye contact: Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.·
After swallowing: If symptoms persist consult doctor.·
Information for doctor:·
Most important symptoms and effects, both acute and delayedNo further relevant information available.
Indication of any immediate medical attention and special treatment needed
No further relevant information available.


SECTION 5. FIREFIGHTING MEASURES

Extinguishing media·
Suitable extinguishing agents: CO2, extinguishing powder or water spray. Fight larger fires with water spray or alcohol resistant foam.·
Special hazards arising from the substance or mixture
No further relevant information available.·
Advice for firefighters·
Protective equipment: No special measures required.


SECTION 6. ACCIDENTAL RELEASE MEASURES

Personal precautions, protective equipment and emergency procedures
Not required.·
Environmental precautions: No special measures required.·
Methods and material for containment and cleaning up:
Dispose contaminated material as waste according to item 13.
Ensure adequate ventilation.·
Reference to other sections
See Section 7 for information on safe handling.
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information.


SECTION 7. HANDLING AND STORAGE

Handling:·
Precautions for safe handling
No special precautions are necessary if used correctly.·
Information about protection against explosions and fires: No special measures required.·
Conditions for safe storage, including any incompatibilities·
Storage:· Requirements to be met by storerooms and receptacles:
No special requirements.·
Information about storage in one common storage facility:
Not required.·
Further information about storage conditions:
Keep receptacle tightly sealed.·
Specific end use(s)No further relevant information available.


SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION

Additional information about design of technical systems:
No further data; see item 7.·
Control parameters·
Components with limit values that require monitoring at the workplace:
Not required.·
Additional information: The lists that were valid during the creation were used as basis.·
Exposure controls·
Personal protective equipment:·
General protective and hygienic measures: Keep away from foodstuffs, beverages and feed.Immediately remove all soiled and contaminated clothing. Wash hands before breaks and at the end of work. Avoid contact with the eyes and skin.·
Breathing equipment:
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure userespiratory protective device that is independent of circulating air.·
Protection of hands:
Protective gloves
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ thechemical mixture.Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
Material of gloves
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality andvaries from manufacturer to manufacturer.·
Penetration time of glove material
The exact break through time has to be found out by the manufacturer of the protective gloves and has to beobserved.·
Eye protection:
Tightly sealed goggles


SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES

Information on basic physical and chemical properties
General Information
Appearance:
Form: Crystalline
Color: Yellow
Odor: Odorless
Odor threshold: Not determined.
pH-value: Not applicable.
Change in condition
Melting point/Melting range: no data °C
Boiling point/Boiling range: no data °C
Flash point: Not applicable.
Flammability (solid, gaseous): Not determined.
Ignition temperature:
Decomposition temperature: Not determined.
Auto igniting: Not determined.
Danger of explosion: Product does not present an explosion hazard.
Explosion limits:
Lower: Not determined.
Upper: Not determined.
Vapor pressure: no data hPa
Density: Not determined.
Relative density Not determined.
Vapor density Not applicable.
Evaporation rate Not applicable.
Solubility in / Miscibility with
Water: Insoluble.
Partition coefficient (n-octanol/water): Not determined.
Viscosity:
Dynamic: Not applicable.
Kinematic: Not applicable.
Solvent content:
Organic solvents: 0.0 %
VOC content: 0.0 g/l / 0.00 lb/gl
Solids content: 100.0 %
Other information No further relevant information available.


SECTION 10. STABILITY AND REACTIVITY

Reactivity No further relevant information available.
Chemical stability
Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.
Possibility of hazardous reactions No dangerous reactions known.
Conditions to avoid No further relevant information available.
Incompatible materials: No further relevant information available.
Hazardous decomposition products: No dangerous decomposition products known.


SECTION 11. TOXICOLOGICAL INFORMATION

Information on toxicological effects
Acute toxicity:
Primary irritant effect:
on the skin: Irritant to skin and mucous membranes.
on the eye: Irritating effect.
Sensitization: No sensitizing effects known.
Additional toxicological information:
Carcinogenic categories
IARC (International Agency for Research on Cancer)
Substance is not listed.
NTP (National Toxicology Program)
Substance is not listed.
OSHA-Ca (Occupational Safety & Health Administration)
Substance is not listed.


SECTION 12. ECOLOGICAL INFORMATION

Toxicity
Aquatic toxicity: No further relevant information available.
Persistence and degradability No further relevant information available.
Behavior in environmental systems:
Bioaccumulative potential No further relevant information available.
Mobility in soil No further relevant information available.
Additional ecological information:
General notes: Not known to be hazardous to water.
Results of PBT and vPvB assessment
PBT: Not applicable.
vPvB: Not applicable.
Other adverse effects No further relevant information available.


SECTION 13. DISPOSAL CONSIDERATIONS

Waste treatment methods
Recommendation:
Must not be disposed of together with household garbage. Do not allow product to reach sewage system.
Uncleaned packagings:
Recommendation: Disposal must be made according to official regulations.


SECTION 14. TRANSPORT INFORMATION

UN-Number
DOT, ADN, IMDG, IATA not regulated
UN proper shipping name
DOT, ADN, IMDG, IATA not regulated
Transport hazard class(es)
DOT, ADN, IMDG, IATA
Class not regulated
Packing group
DOT, IMDG, IATA not regulated
Environmental hazards:
Marine pollutant: No
Special precautions for user Not applicable.
Transport in bulk according to Annex II of
MARPOL73/78 and the IBC Code Not applicable.
UN "Model Regulation": not regulated


SECTION 15. REGULATORY INFORMATION

Safety, health and environmental regulations/legislation specific for the substance or mixture
Sara
Section 355 (extremely hazardous substances):
Substance is not listed.
Section 313 (Specific toxic chemical listings):
Substance is not listed.
TSCA (Toxic Substances Control Act):
Substance is not listed.
Proposition 65
Chemicals known to cause cancer:
Substance is not listed.
Chemicals known to cause reproductive toxicity for females:
Substance is not listed.
Chemicals known to cause reproductive toxicity for males:
Substance is not listed.
Chemicals known to cause developmental toxicity:
Substance is not listed.
Carcinogenic categories
EPA (Environmental Protection Agency)
Substance is not listed.
TLV (Threshold Limit Value established by ACGIH)
Substance is not listed.
NIOSH-Ca (National Institute for Occupational Safety and Health)
Substance is not listed.
GHS label elements
The substance is classified and labeled according to the Globally Harmonized System (GHS).
Hazard pictograms
GHS07
Signal word Warning
Hazard-determining components of labeling:
12-Molybdosilicic acid hydrate
Hazard statements
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H335 May cause respiratory irritation.
Precautionary statements
P262 Do not get in eyes, on skin, or on clothing.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P305+P351+P338 If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P403+P233 Store in a well-ventilated place. Keep container tightly closed.
P501 Dispose of contents/container in accordance with local/regional/national/international
regulations.
Chemical safety assessment: A Chemical Safety Assessment has not been carried out.


SECTION 16. OTHER INFORMATION

Safety Data Sheet according to Regulation (EC) No. 1907/2006 (REACH). The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any guarantee of the properties of the product. American Elements shall not be held liable for any damage resulting from handling or from contact with the above product. See reverse side of invoice or packing slip for additional terms and conditions of sale. COPYRIGHT 1997-2022 AMERICAN ELEMENTS. LICENSED GRANTED TO MAKE UNLIMITED PAPER COPIES FOR INTERNAL USE ONLY.

About Silicomolybdic Acid Hydrate

Silicomolybdic Acid Hydrate is generally immediately available in most volumes. High purity, submicron and nanopowder forms may be considered. American Elements produces to many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia) and follows applicable ASTM testing standards. Typical and custom packaging is available. Additional technical, research and safety (MSDS) information is available as is a Reference Calculator for converting relevant units of measurement.

Silicomolybdic Acid Hydrate Synonyms

12-molybdosilicicacid hydrate; [(hydroxy-dioxo-molybdenio)oxy-dioxo-molybdenio]oxy-dioxo-tris[[[(hydroxy-dioxo-molybdenio)oxy-dioxo-molybdenio]oxy-dioxo-molybdenio]oxy]silyloxy-molybdenum hydrate; cas 11104-89-5 (anhydrous)

Chemical Identifiers

Linear Formula H4SiO4 • 12MoO3 • xH2O
MDL Number MFCD00150575
EC No. N/A
Pubchem CID N/A
IUPAC Name N/A
SMILES O.O=[Mo](=O)(O[Si] (O[Mo](=O)(=O)O[Mo] (=O)(=O)O[Mo](O)(=O )=O)(O[Mo](=O)(=O)O [Mo](=O)(=O)O[Mo](O )(=O)=O)O[Mo](=O)(= O)O[Mo](=O)(=O)O[Mo ](O)(=O)=O)O[Mo](=O )(=O)O[Mo](O)(=O)=O
InchI Identifier InChI=1S/12Mo.O4Si.5H2O.32O/c;;;;;;;;;;;;1-5(2,3)4;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;/h;;;;;;;;;;;;;5*1H2;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;/q;;;;8*+1;-4;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;/p-4
InchI Key IDTGEYOTLWPSGZ-UHFFFAOYSA-J

Packaging Specifications

Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Shipping documentation includes a Certificate of Analysis and Safety Data Sheet (SDS). Solutions are packaged in polypropylene, plastic or glass jars up to palletized 440 gallon liquid totes, and 36,000 lb. tanker trucks.

Related Elements

Molybdenum

See more Molybdenum products. Molybdenum (atomic symbol: Mo, atomic number: 42) is a Block D, Group 6, Period 5 element with an atomic weight of 95.96. Molybdenum Bohr ModelThe number of electrons in each of molybdenum's shells is [2, 8, 18, 13, 1] and its electron configuration is [Kr] 4d5 5s1. The molybdenum atom has a radius of 139 pm and a Van der Waals radius of 209 pm. In its elemental form, molybdenum has a gray metallic appearance. Molybdenum was discovered by Carl Wilhelm in 1778 and first isolated by Peter Jacob Hjelm in 1781. Molybdenum is the 54th most abundant element in the earth's crust. Elemental MolybdenumIt has the third highest melting point of any element, exceeded only by tungsten and tantalum. Molybdenum does not occur naturally as a free metal, it is found in various oxidation states in minerals. The primary commercial source of molybdenum is molybdenite, although it is also recovered as a byproduct of copper and tungsten mining. The origin of the name Molybdenum comes from the Greek word molubdos meaning lead.

Silicon

See more Silicon products. Silicon (atomic symbol: Si, atomic number: 14) is a Block P, Group 14, Period 3 element with an atomic weight of 28.085. Silicon Bohr MoleculeThe number of electrons in each of Silicon's shells is 2, 8, 4 and its electron configuration is [Ne] 3s2 3p2. The silicon atom has a radius of 111 pm and a Van der Waals radius of 210 pm. Silicon was discovered and first isolated by Jöns Jacob Berzelius in 1823. Silicon makes up 25.7% of the earth's crust, by weight, and is the second most abundant element, exceeded only by oxygen. The metalloid is rarely found in pure crystal form and is usually produced from the iron-silicon alloy ferrosilicon. Elemental SiliconSilica (or silicon dioxide), as sand, is a principal ingredient of glass, one of the most inexpensive of materials with excellent mechanical, optical, thermal, and electrical properties. Ultra high purity silicon can be doped with boron, gallium, phosphorus, or arsenic to produce silicon for use in transistors, solar cells, rectifiers, and other solid-state devices which are used extensively in the electronics industry.The name Silicon originates from the Latin word silex which means flint or hard stone.

TODAY'S TOP DISCOVERY!

March 29, 2024
Los Angeles, CA
Each business day American Elements' scientists & engineers post their choice for the most exciting materials science news of the day
U.S. DOE scientists convert carbon monoxide into methanol using cascade reaction strategy

U.S. DOE scientists convert carbon monoxide into methanol using cascade reaction strategy