Silicon Aluminum Oxide Sputtering Target

CAS #:

Linear Formula:

Al2O3 • SiO2

MDL Number:

MFCD00077645

EC No.:

215-113-2

ORDER

PRODUCT Product Code ORDER SAFETY DATA TECHNICAL DATA
(2N) 99% Silicon Aluminum Oxide Sputtering Target
SI-ALO-02-ST
Pricing > SDS > Data Sheet >
(2N5) 99.5% Silicon Aluminum Oxide Sputtering Target
SI-ALO-025-ST
Pricing > SDS > Data Sheet >
(3N) 99.9% Silicon Aluminum Oxide Sputtering Target
SI-ALO-03-ST
Pricing > SDS > Data Sheet >
(3N5) 99.95% Silicon Aluminum Oxide Sputtering Target
SI-ALO-035-ST
Pricing > SDS > Data Sheet >
(4N) 99.99% Silicon Aluminum Oxide Sputtering Target
SI-ALO-04-ST
Pricing > SDS > Data Sheet >
(5N) 99.999% Silicon Aluminum Oxide Sputtering Target
SI-ALO-05-ST
Pricing > SDS > Data Sheet >

Silicon Aluminum Oxide Sputtering Target Properties (Theoretical)

Compound Formula Al6O13Si2
Molecular Weight 426.052432
Appearance Target
Melting Point 1810 °C
Boiling Point N/A
Density 2.7 to 3.0 g/cm3
Solubility in H2O 0.07 g/l at 20 °C - insoluble
Electrical Resistivity 10 to 11 10x Ω-m
Poisson's Ratio 0.25
Specific Heat 950 J/kg-K
Tensile Strength 160 MPa (Ultimate)
Thermal Conductivity 3.5 to 11 W/m-K
Thermal Expansion 5.8 µm/m-K
Young's Modulus 110 to 170 GPa
Exact Mass 425.776975
Monoisotopic Mass 425.776975

Silicon Aluminum Oxide Sputtering Target Health & Safety Information

Signal Word Danger
Hazard Statements H350i
Hazard Codes T
RTECS Number N/A
Transport Information NONH for all modes of transport
WGK Germany 3
MSDS / SDS

About Silicon Aluminum Oxide Sputtering Target

American Elements specializes in producing high purity Silicon Aluminum Oxide sputtering targets with the highest possible density and smallest possible average grain sizes for use in semiconductor, photovoltaic, and coating applications by chemical vapor deposition (CVD) and physical vapor deposition (PVD) and optical applications. Our standard Rotatable Targets for large area thin film deposition are produced either by spray coating on a tubular substrate or casting of a solid tube. Rotary Targets (Cylindrical Targets) are available with dimensions and configurations up to 1,000 mm in length for large area coating for solar energy or fuel cells and flip-chip applications. Research sized targets are also produced as well as custom sizes and alloys. All targets are analyzed using best demonstrated techniques including X-Ray Fluorescence (XRF), Glow Discharge Mass Spectrometry (GDMS), and Inductively Coupled Plasma (ICP). "Sputtering" allows for thin film deposition of an ultra high purity sputtering metallic or oxide material onto another solid substrate by the controlled removal and conversion of the target material into a directed gaseous/plasma phase through ionic bombardment. Besides rotary targets we can also provide targets outside in just about any size and shape, such as rectangular, annular, or oval targets. Materials are produced using crystallization , solid state and other ultra high purification processes such as sublimation. American Elements specializes in producing custom compositions for commercial and research applications and for new proprietary technologies. American Elements also casts any of the rare earth metals and most other advanced materials into rod, bar or plate form , as well as other machined shapes. We also produce Silicon as disc, granules, ingot, oxide pellets, oxide pieces, oxide powder, and rod. Oxide compounds are not conductive to electricity. However, certain perovskite structured oxides are electronically conductive finding application in the cathode of solid oxide fuel cells and oxygen generation systems. Other shapes are available by request.

Silicon Aluminum Oxide Sputtering Target Synonyms

Aluminum oxide-silicon dioxide, alumina silica, silicon aluminate, aluminum silicate

Chemical Identifiers

Linear Formula Al2O3 • SiO2
MDL Number MFCD00077645
EC No. 215-113-2
Pubchem CID 56841936
IUPAC Name dioxosilane; oxo(oxoalumanyloxy)alumane
SMILES O=[Al]O[Al]=O.O=[Si]=O.O=[Si]=O.O=[Al]O[Al]=O.O=[Al]O[Al]=O
InchI Identifier InChI=1S/6Al.2O2Si.9O/c;;;;;;2*1-3-2;;;;;;;;;
InchI Key KZHJGOXRZJKJNY-UHFFFAOYSA-N

Packaging Specifications

Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Shipping documentation includes a Certificate of Analysis and Safety Data Sheet (SDS). Solutions are packaged in polypropylene, plastic or glass jars up to palletized 440 gallon liquid totes, and 36,000 lb. tanker trucks.

Payment Methods

American Elements accepts checks, wire transfers, ACH, most major credit and debit cards (Visa, MasterCard, AMEX, Discover) and Paypal.

For the convenience of our international customers, American Elements offers the following additional payment methods:

SOFORT bank tranfer payment for Austria, Belgium, Germany and SwitzerlandJCB cards for Japan and WorldwideBoleto Bancario for BraziliDeal payments for the Netherlands, Germany, Austria, Belgium, Italy, Poland, Spain, Switzerland, and the United KingdomGiroPay for GermanyDankort cards for DenmarkElo cards for BrazileNETS for SingaporeCartaSi for ItalyCarte-Bleue cards for FranceChina UnionPayHipercard cards for BrazilTROY cards for TurkeyBC cards for South KoreaRuPay for India

Related Elements

Aluminum

See more Aluminum products. Aluminum (or Aluminium) (atomic symbol: Al, atomic number: 13) is a Block P, Group 13, Period 3 element with an atomic weight of 26.9815386. It is the third most abundant element in the earth's crust and the most abundant metallic element. Aluminum Bohr Model Aluminum's name is derived from alumina, the mineral from which Sir Humphrey Davy attempted to refine it from in 1812. Aluminum was first predicted by Antoine Lavoisier 1787 and first isolated by Hans Christian Øersted in 1825. Aluminum is a silvery gray metal that possesses many desirable characteristics. It is light, nonmagnetic and non-sparking. It stands second among metals in the scale of malleability, and sixth in ductility. It is extensively used in many industrial applications where a strong, light, easily constructed material is needed. Elemental AluminumAlthough it has only 60% of the electrical conductivity of copper, it is used in electrical transmission lines because of its light weight. Pure aluminum is soft and lacks strength, but alloyed with small amounts of copper, magnesium, silicon, manganese, or other elements, it imparts a variety of useful properties.

Silicon

See more Silicon products. Silicon (atomic symbol: Si, atomic number: 14) is a Block P, Group 14, Period 3 element with an atomic weight of 28.085. Silicon Bohr MoleculeThe number of electrons in each of Silicon's shells is 2, 8, 4 and its electron configuration is [Ne] 3s2 3p2. The silicon atom has a radius of 111 pm and a Van der Waals radius of 210 pm. Silicon was discovered and first isolated by Jöns Jacob Berzelius in 1823. Silicon makes up 25.7% of the earth's crust, by weight, and is the second most abundant element, exceeded only by oxygen. The metalloid is rarely found in pure crystal form and is usually produced from the iron-silicon alloy ferrosilicon. Elemental SiliconSilica (or silicon dioxide), as sand, is a principal ingredient of glass, one of the most inexpensive of materials with excellent mechanical, optical, thermal, and electrical properties. Ultra high purity silicon can be doped with boron, gallium, phosphorus, or arsenic to produce silicon for use in transistors, solar cells, rectifiers, and other solid-state devices which are used extensively in the electronics industry.The name Silicon originates from the Latin word silex which means flint or hard stone.

TODAY'S TOP DISCOVERY!

April 18, 2024
Los Angeles, CA
Each business day American Elements' scientists & engineers post their choice for the most exciting materials science news of the day
University of Waterloo IQC researchers efficiently produce nearly perfect entangled photon pairs from quantum dot sources

University of Waterloo IQC researchers efficiently produce nearly perfect entangled photon pairs from quantum dot sources