20th anniversary seal20th anniversary seal20th anniversary seal

Strontium Sulfate

CAS #:

Linear Formula:

SrSO4

MDL Number:

MFCD00036274

EC No.:

231-850-2

ORDER

PRODUCT Product Code ORDER SAFETY DATA TECHNICAL DATA
(2N) 99% Strontium Sulfate
SR-SAT-02
Pricing > SDS > Data Sheet >
(3N) 99.9% Strontium Sulfate
SR-SAT-03
Pricing > SDS > Data Sheet >
(4N) 99.99% Strontium Sulfate
SR-SAT-04
Pricing > SDS > Data Sheet >
(5N) 99.999% Strontium Sulfate
SR-SAT-05
Pricing > SDS > Data Sheet >

Strontium Sulfate Properties (Theoretical)

Compound Formula O4SSr
Molecular Weight 183.63
Appearance White crystals or crystalline powder
Melting Point 1,606 °C
Boiling Point N/A
Density 3.96 g/cm3
Solubility in H2O 125 mg/L (25 °C)
pH 7.9 (10 g/L)
Exact Mass 183.857 g/mol
Monoisotopic Mass 183.857346 Da

Strontium Sulfate Health & Safety Information

Signal Word N/A
Hazard Statements N/A
Hazard Codes N/A
Risk Codes N/A
Safety Statements N/A
Transport Information N/A

View and Print SDS

SAFETY DATA SHEET

Date Accessed: 10/15/2019
Date Revised: 05/15/2015

SECTION 1. IDENTIFICATION

Product Name: Strontium Sulfate

Product Number: All applicable American Elements product codes, e.g. SR-SAT-02 02 , SR-SAT-03 03 , SR-SAT-04 04 , SR-SAT-05 05

CAS #: 7759-02-6

Relevant identified uses of the substance: Scientific research and development

Supplier details:
American Elements
10884 Weyburn Ave.
Los Angeles, CA 90024
Tel: +1 310-208-0551
Fax: +1 310-208-0351

Emergency telephone number:
Domestic, North America: +1 800-424-9300
International: +1 703-527-3887


SECTION 2. HAZARDS IDENTIFICATION

HAZARDS IDENTIFICATION
Emergency Overview
OSHA Hazards
No known OSHA hazards
HMIS Classification
Health Hazard: 0
Flammability: 0
Physical hazards: 0
NFPA Rating
Health Hazard: 0
Fire: 0
Reactivity Hazard: 0
Potential Health Effects
Inhalation May be harmful if inhaled. May cause respiratory tract irritation.
Skin May be harmful if absorbed through skin. May cause skin irritation.
Eyes May cause eye irritation.
Ingestion May be harmful if swallowed.


SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS

CAS #: 7759-02-6
Formula: SrSO4
Molecular Weight: 183.68 g/mol


SECTION 4. FIRST AID MEASURES

If inhaled
If breathed in, move person into fresh air. If not breathing give artificial respiration
In case of skin contact
Wash off with soap and plenty of water.
In case of eye contact
Flush eyes with water as a precaution.
If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water.


SECTION 5. FIREFIGHTING MEASURES

Flammable properties
Flash point not applicable
Ignition temperature no data available
Suitable extinguishing media
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
Special protective equipment for fire-fighters
Wear self contained breathing apparatus for fire fighting if necessary.
Further information
The product itself does not burn.


SECTION 6. ACCIDENTAL RELEASE MEASURES

Personal precautions
Avoid dust formation.
Environmental precautions
Do not let product enter drains.
Methods for cleaning up
Sweep up and shovel. Keep in suitable, closed containers for disposal.


SECTION 7. HANDLING AND STORAGE

Handling
Provide appropriate exhaust ventilation at places where dust is formed.
Storage
Keep container tightly closed in a dry and well-ventilated place.
Keep in a dry place.


SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION

Contains no substances with occupational exposure limit values.
Personal protective equipment
Respiratory protection
Respiratory protection is not required. Where protection from nuisance levels of dusts are desired, use type N95 (US) or type P1 (EN 143) dust masks. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU).
Hand protection
For prolonged or repeated contact use protective gloves.
Eye protection
Safety glasses
Hygiene measures
General industrial hygiene practice.


SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES

Appearance
Form: powder
Color: light yellow
Safety data
pH: no data available
Melting point: no data available
Boiling point: no data available
Flash point: not applicable
Ignition temperature: no data available
Lower explosion limit: no data available
Upper explosion limit: no data available
Density: 3.96 g/mL at 25 °C (77 °F)
Water solubility: no data available


SECTION 10. STABILITY AND REACTIVITY

Storage stability
Stable under recommended storage conditions.
Materials to avoid
Strong oxidizing agents
Hazardous decomposition products
Hazardous decomposition products formed under fire conditions. - Sulphur oxides


SECTION 11. TOXICOLOGICAL INFORMATION

Acute toxicity
no data available
Irritation and corrosion
no data available
Sensitisation
no data available
Chronic exposure
IARC: No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC.
ACGIH: No component of this product present at levels greater than or equal to 0.1% is identified as a carcinogen or potential carcinogen by ACGIH.
NTP: No component of this product present at levels greater than or equal to 0.1% is identified as a known or anticipated carcinogen by NTP.
OSHA: No component of this product present at levels greater than or equal to 0.1% is identified as a carcinogen or potential carcinogen by OSHA.
Inhalation May be harmful if inhaled. May cause respiratory tract irritation.
Skin May be harmful if absorbed through skin. May cause skin irritation.
Eyes May cause eye irritation.
Ingestion May be harmful if swallowed.


SECTION 12. ECOLOGICAL INFORMATION

Elimination information (persistence and degradability)
no data available
Ecotoxicity effects
no data available
Further information on ecology
no data available


SECTION 13. DISPOSAL CONSIDERATIONS

Product
Observe all federal, state, and local environmental regulations.
Contaminated packaging
Dispose of as unused product.


SECTION 14. TRANSPORT INFORMATION

DOT (US)
Not dangerous goods
IMDG
Not dangerous goods
IATA
Not dangerous goods


SECTION 15. REGULATORY INFORMATION

OSHA Hazards
No known OSHA hazards
TSCA Status
On TSCA Inventory
DSL Status
All components of this product are on the Canadian DSL list.
SARA 302 Components
SARA 302: No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302.
SARA 313 Components
SARA 313: This material does not contain any chemical components with known CAS numbers that exceed the threshold (De Minimis) reporting levels established by SARA Title III, Section 313.
SARA 311/312 Hazards
No SARA Hazards
Massachusetts Right To Know Components
No Components Listed
Pennsylvania Right To Know Components
Strontium sulphate
CAS-No.
7759-02-6
Revision Date
New Jersey Right To Know Components
Strontium sulphate
CAS-No.
7759-02-6
Revision Date
California Prop. 65 Components
This product does not contain any chemicals known to State of California to cause cancer, birth defects, or any other reproductive harm.


SECTION 16. OTHER INFORMATION

Safety Data Sheet according to Regulation (EC) No. 1907/2006 (REACH). The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any guarantee of the properties of the product. American Elements shall not be held liable for any damage resulting from handling or from contact with the above product. See reverse side of invoice or packing slip for additional terms and conditions of sale. COPYRIGHT 1997-2018 AMERICAN ELEMENTS. LICENSED GRANTED TO MAKE UNLIMITED PAPER COPIES FOR INTERNAL USE ONLY.

About Strontium Sulfate

High purity Strontium SulfateSulfate IonStrontium Sulfate is a moderately water and acid soluble Strontium source for uses compatible with sulfates. Sulfate compounds are salts or esters of sulfuric acid formed by replacing one or both of the hydrogens with a metal. Most metal sulfate compounds are readily soluble in water for uses such as water treatment, unlike fluorides and oxides which tend to be insoluble. Organometallic forms are soluble in organic solutions and sometimes in both aqueous and organic solutions. Metallic ions can also be dispersed utilizing suspended or coated nanoparticles and deposited utilizing sputtering targets and evaporation materials for uses such as solar cells and fuel cells. Strontium Sulfate is generally immediately available in most volumes. Ultra high purity and high purity compositions improve both optical quality and usefulness as scientific standards. Nanoscale elemental powders and suspensions, as alternative high surface area forms, may be considered. We also produce Strontium Sulfate Solution. American Elements produces to many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia) and follows applicable ASTM testing standards. Typical and custom packaging is available. Additional technical, research and safety (MSDS) information is available as is a Reference Calculator for converting relevant units of measurement.

Strontium Sulfate Synonyms

Celestite, Reagent white powder, Strontium monosulfate, Sulfuric acid, strontium salt(1:1), Strontium sulfate

Chemical Identifiers

Linear Formula SrSO4
MDL Number MFCD00036274
EC No. 231-850-2
Beilstein Registry No. N/A
Pubchem CID 3084026
IUPAC Name N/A
SMILES [Sr+2].[O-]S([O-])(=O)=O
InchI Identifier InChI=1S/H2O4S.Sr/c1-5(2,3)4;/h(H2,1,2,3,4);/q;+2/p-2
InchI Key UBXAKNTVXQMEAG-UHFFFAOYSA-L

Packaging Specifications

Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Shipping documentation includes a Certificate of Analysis and Safety Data Sheet (SDS). Solutions are packaged in polypropylene, plastic or glass jars up to palletized 440 gallon liquid totes, and 36,000 lb. tanker trucks.

Related Elements

See more Strontium products. Strontium (atomic symbol: Sr, atomic number: 38) is a Block S, Group 2, Period 5 element with an atomic weight of 87.62 . Strontium Bohr ModelThe number of electrons in each of Strontium's shells is [2, 8, 18, 8, 2] and its electron configuration is [Kr] 5s2. The strontium atom has a radius of 215 pm and a Van der Waals radius of 249 pm. Strontium was discovered by William Cruickshank in 1787 and first isolated by Humphry Davy in 1808. In its elemental form, strontium is a soft, silvery white metallic solid that quickly turns yellow when exposed to air. Elemental StrontiumCathode ray tubes in televisions are made of strontium, which are becoming increasingly displaced by other display technologies pyrotechnics and fireworks employ strontium salts to achhieve a bright red color. Radioactive isotopes of strontium have been used in radioisotope thermoelectric generators (RTGs) and for certain cancer treatments. In nature, most strontium is found in celestite (as strontium sulfate) and strontianite (as strontium carbonate). Strontium was named after the Scottish town where it was discovered.

See more Sulfur products. Sulfur (or Sulphur) (atomic symbol: S, atomic number: 16) is a Block P, Group 16, Period 3 element with an atomic radius of 32.066. Sulfur Bohr ModelThe number of electrons in each of Sulfur's shells is 2, 8, 6 and its electron configuration is [Ne] 3s2 3p4. In its elemental form, sulfur has a light yellow appearance. The sulfur atom has a covalent radius of 105 pm and a Van der Waals radius of 180 pm. In nature, sulfur can be found in hot springs, meteorites, volcanoes, and as galena, gypsum, and epsom salts. Sulfur has been known since ancient times but was not accepted as an element until 1777, when Antoine Lavoisier helped to convince the scientific community that it was an element and not a compound.

TODAY'S SCIENCE POST!

October 15, 2019
Los Angeles, CA
Each business day American Elements' scientists & engineers post their choice for the most exciting materials science news of the day

New research integrates borophene and graphene into 2-D heterostructures