Study on dynamic properties of the photoexcited charge carriers at anatase TiO2 nanowires/fluorine doped tin oxide interface.

Title Study on dynamic properties of the photoexcited charge carriers at anatase TiO2 nanowires/fluorine doped tin oxide interface.
Authors Q. Qiu; L. Xu; D. Wang; Y. Lin; T. Xie
Journal J Colloid Interface Sci
DOI 10.1016/j.jcis.2017.04.075
Abstract

The photoexcited electrons transfer dynamics at the TiO2 film/fluorine doped tin oxide (FTO) interface of anatase TiO2 nanowire arrays (NWAs) and QD-sensitized TiO2 NWAs films have been studied by using surface photovoltage (SPV) and transient photovoltage (TPV) techniques. Various SPV and TPV responses were obtained when the laser beam was incident from the front side illumination and back side illumination. Based on the work function values of anatase TiO2 NWAs and FTO, the results indicate that diffusion is the major way for the separation and transfer of the photoexcited charge in the both anatase TiO2 NWAs and QD-sensitized TiO2 NWAs films under front side illumination. And the photoexcited charge were separated by drift under the built-in electric field at the TiO2 film/FTO interface for anatase TiO2 NWAs and QD-sensitized TiO2 NWAs films under back side illumination. In addition, under back side illumination the built-in electric field and band structure of CdS/CdSe QDs and anatase TiO2 NWAs lead to the separation and transfer of the photoexcited charge for CdS/CdSe QDs sensitized TiO2 NWAs/FTO film. As the intensity of illumination increases, the effect of built-in electric field on the separation and transfer of the photoexcited charge in the QD-sensitized TiO2 NWAs film decreases.

Citation Q. Qiu; L. Xu; D. Wang; Y. Lin; T. Xie.Study on dynamic properties of the photoexcited charge carriers at anatase TiO2 nanowires/fluorine doped tin oxide interface.. J Colloid Interface Sci. 2017;501:273281. doi:10.1016/j.jcis.2017.04.075

Related Elements

Titanium

See more Titanium products. Titanium (atomic symbol: Ti, atomic number: 22) is a Block D, Group 4, Period 4 element with an atomic weight of 47.867. The number of electrons in each of Titanium's shells is [2, 8, 10, 2] and its electron configuration is [Ar] 3d2 4s2. Titanium Bohr ModelThe titanium atom has a radius of 147 pm and a Van der Waals radius of 187 pm. Titanium was discovered by William Gregor in 1791 and first isolated by Jöns Jakob Berzelius in 1825. In its elemental form, titanium has a silvery grey-white metallic appearance. Titanium's properties are chemically and physically similar to zirconium, both of which have the same number of valence electrons and are in the same group in the periodic table. Elemental TitaniumTitanium has five naturally occurring isotopes: 46Ti through 50Ti, with 48Ti being the most abundant (73.8%). Titanium is found in igneous rocks and the sediments derived from them. It is named after the word Titanos, which is Greek for Titans.

Fluorine

Fluorine is a Block P, Group 17, Period 2 element. Its electron configuration is [He]2s22p5. The fluorine atom has a covalent radius of 64 pm and its Van der Waals radius is 135 pm. In its elemental form, CAS 7782-41-4, fluorine gas has a pale yellow appearance. Fluorine was discovered by André-Marie Ampère in 1810. It was first isolated by Henri Moissan in 1886.

Tin

Tin Bohr ModelSee more Tin products. Tin (atomic symbol: Sn, atomic number: 50) is a Block P, Group 14, Period 5 element with an atomic weight of 118.710. The number of electrons in each of tin's shells is 2, 8, 18, 18, 4 and its electron configuration is [Kr] 4d10 5s2 5p2. The tin atom has a radius of 140.5 pm and a Van der Waals radius of 217 pm.In its elemental form, tin has a silvery-gray metallic appearance. It is malleable, ductile and highly crystalline. High Purity (99.9999%) Tin (Sn) MetalTin has nine stable isotopes and 18 unstable isotopes. Under 3.72 degrees Kelvin, Tin becomes a superconductor. Applications for tin include soldering, plating, and such alloys as pewter. The first uses of tin can be dated to the Bronze Age around 3000 BC in which tin and copper were combined to make the alloy bronze. The origin of the word tin comes from the Latin word Stannum which translates to the Anglo-Saxon word tin. For more information on tin, including properties, safety data, research, and American Elements' catalog of tin products, visit the Tin element page.

Related Forms & Applications