Titanium Aluminum Vanadium Foil

Titanium 6AL-4V Foil

Linear Formula:

Ti-Al-V

ORDER

PRODUCT Product Code ORDER SAFETY DATA TECHNICAL DATA
(2N) 99% Titanium 6AL-4V Foil
TI-ALV-02-F
Pricing > SDS > Data Sheet >
(2N5) 99.5% Titanium 6AL-4V Foil
TI-ALV-025-F
Pricing > SDS > Data Sheet >
(3N5) 99.95% Titaiium 6AL-4V Foil
TI-ALV-035-F
Pricing > SDS > Data Sheet >
(4N) 99.99% Titanium 6AL-4V Foil
TI-ALV-04-F
Pricing > SDS > Data Sheet >
(5N) 99.999% Titanium 6AL-4V Foil
TI-ALV-05-F
Pricing > SDS > Data Sheet >

Titanium Aluminum Vanadium Foil Properties (Theoretical)

Appearance Foil
Melting Point 1604-1660 °C
Boiling Point N/A
Density 4.43 g/cm3
Solubility in H2O N/A
Electrical Resistivity 0.000178 ohm-cm
Specific Heat 0.5263 J/g-°C
Tensile Strength 950-1000 MPa
Thermal Conductivity 6.7 W/m-K

Titanium Aluminum Vanadium Foil Health & Safety Information

Signal Word N/A
Hazard Statements N/A
Hazard Codes N/A
Risk Codes N/A
Safety Statements N/A
Transport Information N/A

About Titanium Aluminum Vanadium Foil

American Elements specializes in producing Titanium 6AL-4V (Grade 5) as rolled foils and sheets in thicknesses as low as 0.005" with a tolerance of +/- 0.0002". Piece sizes are available up to approximately 7" maximum width. Maximum lengths of about 20" can be obtained with a nominal thickness between about 0.005" and 0.020" for thin film deposition on glass or metal substrates. Materials are produced using crystallization, solid state and other ultra high purification processes such as sublimation. American Elements specializes in producing custom compositions for commercial and research applications and for new proprietary technologies. American Elements also casts any of the rare earth metals and most other advanced materials into rod, bar, or plate form, as well as other machined shapes and through other processes such as nanoparticles and in the form of solutions and organometallics. Due to its high strength, toughness at extreme temperatures, corrosion resistance and low weight, Titanium 6AL/4V (titanium-aluminum-vanadium alloy) is the most widely used titanium alloy. It accounts for almost 50% of all alloys used in aircraft applications. Titanium 6Al-4V foil has important uses in numerous military applications, spacecraft, armor plating, naval ships, electronics, missiles, medical devices, premium sports equipment and consumer electronics. Titanium 6AL-4V foils are available in bulk quantities as well as laboratory quantities for university and corporate R&D applications.

Titanium Aluminum Vanadium Foil Synonyms

Titanium 6AL-4V, Titanium Ti 6AL 4V, Grade 5, Ti-6Al-4V, Ti 6-4, Ti6Al4V, TiAlV alloy, 99906-66-8, 12743-70-3

Chemical Identifiers

Linear Formula Ti-Al-V
MDL Number N/A
EC No. N/A

Packaging Specifications

Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Shipping documentation includes a Certificate of Analysis and Safety Data Sheet (SDS). Solutions are packaged in polypropylene, plastic or glass jars up to palletized 440 gallon liquid totes, and 36,000 lb. tanker trucks.

Related Elements

See more Aluminum products. Aluminum (or Aluminium) (atomic symbol: Al, atomic number: 13) is a Block P, Group 13, Period 3 element with an atomic weight of 26.9815386. It is the third most abundant element in the earth's crust and the most abundant metallic element. Aluminum Bohr Model Aluminum's name is derived from alumina, the mineral from which Sir Humphrey Davy attempted to refine it from in 1812. Aluminum was first predicted by Antoine Lavoisier 1787 and first isolated by Hans Christian Øersted in 1825. Aluminum is a silvery gray metal that possesses many desirable characteristics. It is light, nonmagnetic and non-sparking. It stands second among metals in the scale of malleability, and sixth in ductility. It is extensively used in many industrial applications where a strong, light, easily constructed material is needed. Elemental AluminumAlthough it has only 60% of the electrical conductivity of copper, it is used in electrical transmission lines because of its light weight. Pure aluminum is soft and lacks strength, but alloyed with small amounts of copper, magnesium, silicon, manganese, or other elements, it imparts a variety of useful properties.

See more Titanium products. Titanium (atomic symbol: Ti, atomic number: 22) is a Block D, Group 4, Period 4 element with an atomic weight of 47.867. The number of electrons in each of Titanium's shells is [2, 8, 10, 2] and its electron configuration is [Ar] 3d2 4s2. Titanium Bohr ModelThe titanium atom has a radius of 147 pm and a Van der Waals radius of 187 pm. Titanium was discovered by William Gregor in 1791 and first isolated by Jöns Jakob Berzelius in 1825. In its elemental form, titanium has a silvery grey-white metallic appearance. Titanium's properties are chemically and physically similar to zirconium, both of which have the same number of valence electrons and are in the same group in the periodic table. Elemental TitaniumTitanium has five naturally occurring isotopes: 46Ti through 50Ti, with 48Ti being the most abundant (73.8%). Titanium is found in igneous rocks and the sediments derived from them. It is named after the word Titanos, which is Greek for Titans.

See more Vanadium products. Vanadium (atomic symbol: V, atomic number: 23) is a Block D, Group 5, Period 4 element with an atomic weight of 50.9415. Vanadium Bohr ModelThe number of electrons in each of Vanadium's shells is 2, 8, 11, 2 and its electron configuration is [Ar] 3d3 4s2. The vanadium atom has a radius of 134 pm and a Van der Waals radius of 179 pm. Vanadium was discovered by Andres Manuel del Rio in 1801 and first isolated by Nils Gabriel Sefström in 1830. In its elemental form, vanadium has a bluish-silver appearance. Elemental VanadiumIt is a hard, ductile transition metal that is primarily used as a steel additive and in alloys such as Titanium-6AL-4V, which is composed of titanium, aluminum, and vanadium and is the most common titanium alloy commercially produced. Vanadium is found in fossil fuel deposits and 65 different minerals. Vanadium is not found free in nature; however, once isolated it forms an oxide layer that stabilizes the free metal against further oxidation. Vanadium was named after the word "Vanadis" meaning goddess of beauty in Scandinavian mythology.

TODAY'S TOP DISCOVERY!

December 11, 2024
Los Angeles, CA
Each business day American Elements' scientists & engineers post their choice for the most exciting materials science news of the day
Physics student builds improvised polarimeter using simple circuitry, polarizing film, and LEGO toy bricks

Physics student builds improvised polarimeter using simple circuitry, polarizing film, and LEGO toy bricks