20th anniversary seal20th anniversary seal20th anniversary seal

Titanium Based Molybdenum Zirconium Iron Alloy

Linear Formula:



Ti- Mo-11.5% Zr-0.6% Fe-4.5%
Pricing > SDS > Data Sheet >

Titanium Based Molybdenum Zirconium Iron Alloy Properties



Titanium Based Molybdenum Zirconium Iron Alloy Health & Safety Information

Signal Word N/A
Hazard Statements N/A
Hazard Codes N/A
Transport Information N/A

About Titanium Based Molybdenum Zirconium Iron Alloy

Titanium based Molybdenum Zirconium Tin is one of numerous metal alloys sold by American Elements under the trade name AE Alloys™. Generally immediately available in most volumes, AE Alloys™ are available as bar, ingot, ribbon, wire, shot, sheet, and foil. Ultra high purity and high purity forms also include metal powder, submicron powder and nanoscale, targets for thin film deposition, and pellets for chemical vapor deposition (CVD) and physical vapor deposition (PVD) applications. American Elements produces to many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia) and follows applicable ASTM testing standards. Typical and custom packaging is available. Primary applications include bearing assembly, ballast, casting, step soldering, and radiation shielding. Titanium has become a fundamental material used in medicine due to its ability to resist corrosion, its biocompatibility and its natural ability to join with human bone. There are many medical materials made with Titanium including, surgical titanium instruments, orthopedic titanium rods, pins and plates, medical and dental titanium. These bio-medical materials are biocompatible, resistant to corrosion, degradation, and wear, and they have mechanical properties that duplicate the structures they are intended to replace.

Titanium Based Molybdenum Zirconium Iron Alloy Synonyms


Titanium Based Molybdenum Zirconium Iron Alloy Chemical Identifiers

Linear Formula


Packaging Specifications

Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Shipping documentation includes a Certificate of Analysis and Safety Data Sheet (SDS). Solutions are packaged in polypropylene, plastic or glass jars up to palletized 440 gallon liquid totes, and 36,000 lb. tanker trucks.

Related Elements

See more Titanium products. Titanium (atomic symbol: Ti, atomic number: 22) is a Block D, Group 4, Period 4 element with an atomic weight of 47.867. The number of electrons in each of Titanium's shells is [2, 8, 10, 2] and its electron configuration is [Ar] 3d2 4s2. Titanium Bohr ModelThe titanium atom has a radius of 147 pm and a Van der Waals radius of 187 pm. Titanium was discovered by William Gregor in 1791 and first isolated by Jöns Jakob Berzelius in 1825. In its elemental form, titanium has a silvery grey-white metallic appearance. Titanium's properties are chemically and physically similar to zirconium, both of which have the same number of valence electrons and are in the same group in the periodic table. Elemental TitaniumTitanium has five naturally occurring isotopes: 46Ti through 50Ti, with 48Ti being the most abundant (73.8%). Titanium is found in igneous rocks and the sediments derived from them. It is named after the word Titanos, which is Greek for Titans.

See more Molybdenum products. Molybdenum (atomic symbol: Mo, atomic number: 42) is a Block D, Group 6, Period 5 element with an atomic weight of 95.96. Molybdenum Bohr ModelThe number of electrons in each of molybdenum's shells is [2, 8, 18, 13, 1] and its electron configuration is [Kr] 4d5 5s1. The molybdenum atom has a radius of 139 pm and a Van der Waals radius of 209 pm. In its elemental form, molybdenum has a gray metallic appearance. Molybdenum was discovered by Carl Wilhelm in 1778 and first isolated by Peter Jacob Hjelm in 1781. Molybdenum is the 54th most abundant element in the earth's crust. Elemental MolybdenumIt has the third highest melting point of any element, exceeded only by tungsten and tantalum. Molybdenum does not occur naturally as a free metal, it is found in various oxidation states in minerals. The primary commercial source of molybdenum is molybdenite, although it is also recovered as a byproduct of copper and tungsten mining. The origin of the name Molybdenum comes from the Greek word molubdos meaning lead.

See more Zirconium products. Zirconium (atomic symbol: Zr, atomic number: 40) is a Block D, Group 4, Period 5 element with an atomic weight of 91.224. Zirconium Bohr ModelThe number of electrons in each of Zirconium's shells is 2, 8, 18, 10, 2 and its electron configuration is [Kr] 4d2 5s2. The zirconium atom has a radius of 160 pm and a Van der Waals radius of 186 pm. Zirconium was discovered by Martin Heinrich Klaproth in 1789 and first isolated by Jöns Jakob Berzelius in 1824. In its elemental form, zirconium has a silvery white appearance that is similar to titanium. Zirconium's principal mineral is zircon (zirconium silicate). Elemental ZirconiumZirconium is commercially produced as a byproduct of titanium and tin mining and has many applications as a opacifier and a refractory material. It is not found in nature as a free element. The name of zirconium comes from the mineral zircon, the most important source of zirconium, and from the Persian wordzargun, meaning gold-like.

See more Iron products. Iron (atomic symbol: Fe, atomic number: 26) is a Block D, Group 8, Period 4 element with an atomic weight of 55.845. The number of electrons in each of Iron's shells is 2, 8, 14, 2 and its electron configuration is [Ar] 3d6 4s2. Iron Bohr ModelThe iron atom has a radius of 126 pm and a Van der Waals radius of 194 pm. Iron was discovered by humans before 5000 BC. In its elemental form, iron has a lustrous grayish metallic appearance. Iron is the fourth most common element in the Earth's crust and the most common element by mass forming the earth as a whole. Iron is rarely found as a free element, since it tends to oxidize easily; it is usually found in minerals such as magnetite, hematite, goethite, limonite, or siderite.Elemental Iron Though pure iron is typically soft, the addition of carbon creates the alloy known as steel, which is significantly stronger.

Recent Research

Newly developed Ti-Nb-Zr-Ta-Si-Fe biomedical beta titanium alloys with increased strength and enhanced biocompatibility., Kopova, Ivana, Stráský Josef, Harcuba Petr, Landa Michal, Janeček Miloš, and Bačákova Lucie , Mater Sci Eng C Mater Biol Appl, 2016 Mar 1, Volume 60, p.230-8, (2016)

Implant survival and patient satisfaction of reduced diameter implants made from a titanium-zirconium alloy: A retrospective cohort study with 550 implants in 311 patients., Herrmann, Jan, Hentschel Andreas, Glauche Ingmar, Vollmer Armin, Schlegel Karl Andreas, and Lutz Rainer , J Craniomaxillofac Surg, 2016 Sep 23, (2016)

Effect of molybdenum on structure, microstructure and mechanical properties of biomedical Ti-20Zr-Mo alloys., Kuroda, Pedro Akira Baza, Buzalaf Marília Afonso Rab, and Grandini Carlos Roberto , Mater Sci Eng C Mater Biol Appl, 2016 Oct 1, Volume 67, p.511-5, (2016)

Influence of polyetheretherketone coatings on the Ti-13Nb-13Zr titanium alloy's bio-tribological properties and corrosion resistance., Sak, Anita, Moskalewicz Tomasz, Zimowski Sławomir, Cieniek Łukasz, Dubiel Beata, Radziszewska Agnieszka, Kot Marcin, and Łukaszczyk Alicja , Mater Sci Eng C Mater Biol Appl, 2016 Jun 1, Volume 63, p.52-61, (2016)

A new titanium based alloy Ti-27Nb-13Zr produced by powder metallurgy with biomimetic coating for use as a biomaterial., Mendes, Marcio W. D., Ágreda Carola G., Bressiani Ana H. A., and Bressiani José C. , Mater Sci Eng C Mater Biol Appl, 2016 Jun 1, Volume 63, p.671-7, (2016)

Numerical assessment of bone remodeling around conventionally and early loaded titanium and titanium-zirconium alloy dental implants., Akça, Kıvanç, Eser Atılım, Çavuşoğlu Yeliz, Sağırkaya Elçin, and Çehreli Murat Cavit , Med Biol Eng Comput, 2015 May, Volume 53, Issue 5, p.453-62, (2015)

The in vitro and in vivo performance of a strontium-containing coating on the low-modulus Ti35Nb2Ta3Zr alloy formed by micro-arc oxidation., Liu, Wei, Cheng Mengqi, Wahafu Tuerhongjiang, Zhao Yaochao, Qin Hui, Wang Jiaxing, Zhang Xianlong, and Wang Liqiang , J Mater Sci Mater Med, 2015 Jul, Volume 26, Issue 7, p.203, (2015)

One-year follow-up of titanium/zirconium alloy X commercially pure titanium narrow-diameter implants placed in the molar region of the mandible: a randomized controlled trial., Tolentino, L, Sukekava F, Garcez-Filho J, Tormena M, Lima L A., and Araújo M G. , Clin Oral Implants Res, 2015 Feb 18, (2015)

Spark anodization of titanium-zirconium alloy: surface characterization and bioactivity assessment., Sharma, Ajay, A McQuillan James, Sharma Lavanya A., Waddell John Neil, Shibata Yo, and Duncan Warwick John , J Mater Sci Mater Med, 2015 Aug, Volume 26, Issue 8, p.221, (2015)

Wear studies on plasma-sprayed Al2O3 and 8mole% of Yttrium-stabilized ZrO2 composite coating on biomedical Ti-6Al-4V alloy for orthopedic joint application., Ganapathy, Perumal, Manivasagam Geetha, Rajamanickam Asokamani, and Natarajan Alagumurthi , Int J Nanomedicine, 2015, Volume 10 Suppl 1, p.213-22, (2015)


June 24, 2017
Los Angeles, CA
Each business day American Elements' scientists & engineers post their choice for the most exciting materials science news of the day

Three-Dimensional Printed Graphene Foams