Tungsten Silicon Foil

Linear Formula:

W-Si

MDL Number:

N/A

EC No.:

N/A

ORDER

PRODUCT Product Code ORDER SAFETY DATA TECHNICAL DATA
(2N) 99% Tungsten Silicon Foil
W-SI-02-F
Pricing > SDS > Data Sheet >
(2N5) 99.5% Tungsten Silicon Foil
W-SI-025-F
Pricing > SDS > Data Sheet >
(3N) 99.9% Tungsten Silicon Foil
W-SI-03-F
Pricing > SDS > Data Sheet >
(3N5) 99.95% Tungsten Silicon Foil
W-SI-035-F
Pricing > SDS > Data Sheet >
(4N) 99.99% Tungsten Silicon Foil
W-SI-04-F
Pricing > SDS > Data Sheet >
(5N) 99.999% Tungsten Silicon Foil
W-SI-05-F
Pricing > SDS > Data Sheet >

Tungsten Silicon Foil Properties (Theoretical)

Compound Formula WSi
Appearance Gray Metallic Foil
Melting Point N/A
Boiling Point N/A
Density N/A
Solubility in H2O Insoluble
Monoisotopic Mass 211.928 g/mol

Tungsten Silicon Foil Health & Safety Information

Signal Word N/A
Hazard Statements N/A
Hazard Codes N/A
RTECS Number N/A
Transport Information N/A
MSDS / SDS

About Tungsten Silicon Foil

American Elements manufactures high purity tungsten-silicon alloy foils in numerous dimensions. Standard metal and alloy foil thicknesses range from 0.003" to approximately 2mm; materials can also be rolled down as thin as 0.001" for use as an evaporation source in microelectronics, optics, magnetics, MEMS, and hard resistant coatings. Piece sizes are available up to approximately 7" maximum width. Maximum lengths of about 20" can be obtained with a nominal thickness between about 0.005" and 0.020" for thin film deposition on glass or metal substrates. We also manufacture tungsten silicon alloy in other forms such as sputtering target. Please request a quote above to receive pricing information based on your specifications for alloy composition and foil dimensions.

Tungsten Silicon Foil Synonyms

WSi master alloy, Tungsten silicide, tungsten monosilicide, CAS 12166-56-2, SiW

Chemical Identifiers

Linear Formula W-Si
MDL Number N/A
EC No. N/A
Pubchem CID 15787033
IUPAC Name silicon; tungsten
SMILES [Si].[W]
InchI Identifier InChI=1S/Si.W
InchI Key WNUPENMBHHEARK-UHFFFAOYSA-N

Packaging Specifications

Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Shipping documentation includes a Certificate of Analysis and Safety Data Sheet (SDS). Solutions are packaged in polypropylene, plastic or glass jars up to palletized 440 gallon liquid totes, and 36,000 lb. tanker trucks.

Related Elements

Silicon

See more Silicon products. Silicon (atomic symbol: Si, atomic number: 14) is a Block P, Group 14, Period 3 element with an atomic weight of 28.085. Silicon Bohr MoleculeThe number of electrons in each of Silicon's shells is 2, 8, 4 and its electron configuration is [Ne] 3s2 3p2. The silicon atom has a radius of 111 pm and a Van der Waals radius of 210 pm. Silicon was discovered and first isolated by Jöns Jacob Berzelius in 1823. Silicon makes up 25.7% of the earth's crust, by weight, and is the second most abundant element, exceeded only by oxygen. The metalloid is rarely found in pure crystal form and is usually produced from the iron-silicon alloy ferrosilicon. Elemental SiliconSilica (or silicon dioxide), as sand, is a principal ingredient of glass, one of the most inexpensive of materials with excellent mechanical, optical, thermal, and electrical properties. Ultra high purity silicon can be doped with boron, gallium, phosphorus, or arsenic to produce silicon for use in transistors, solar cells, rectifiers, and other solid-state devices which are used extensively in the electronics industry.The name Silicon originates from the Latin word silex which means flint or hard stone.

Tungsten

See more Tungsten products. Tungsten (atomic symbol: W, atomic number: 74) is a Block D, Group 6, Period 6 element with an atomic weight of 183.84. The number of electrons in each of tungsten's shells is [2, 8, 18, 32, 12, 2] and its electron configuration is [Xe] 4f14 5d4 6s2. Tungsten Bohr ModelThe tungsten atom has a radius of 139 pm and a Van der Waals radius of 210 pm. Tungsten was discovered by Torbern Bergman in 1781 and first isolated by Juan José Elhuyar and Fausto Elhuyar in 1783. In its elemental form, tungsten has a grayish white, lustrous appearance. Elemental TungstenTungsten has the highest melting point of all the metallic elements and a density comparable to that or uranium or gold and about 1.7 times that of lead. Tungsten alloys are often used to make filaments and targets of x-ray tubes. It is found in the minerals scheelite (CaWO4) and wolframite [(Fe,Mn)WO4]. In reference to its density, Tungsten gets its name from the Swedish words tung and sten, meaning heavy stone.

TODAY'S TOP DISCOVERY!

March 28, 2024
Los Angeles, CA
Each business day American Elements' scientists & engineers post their choice for the most exciting materials science news of the day
University of Michigan researchers develop new fabrication process for helical metal nanoparticles

University of Michigan researchers develop new fabrication process for helical metal nanoparticles