Skip to main content

Ultra Thin Terbium Nanoscale Foil

CAS #: 7440-27-9
Linear Formula:
Tb
MDL Number
MFCD00011256
EC No.:
231-137-6

ORDER

Product Product Code ORDER SAFETY DATA Technical data
(3N) 99.9% Ultra Thin Terbium Nanoscale Foil TB-M-03-FN SDS > Data Sheet >
(4N) 99.99% Ultra Thin Terbium Nanoscale Foil TB-M-04-FN SDS > Data Sheet >
(5N) 99.999% Ultra Thin Terbium Nanoscale Foil TB-M-05-FN SDS > Data Sheet >
WHOLESALE/SKU 0000-742-{{nid}}

Ultra Thin Terbium Nanoscale Foil Properties (Theoretical)

Molecular Weight 158.93
Appearance Silvery
Melting Point 1356 °C
Boiling Point 3230 °C
Density 8219 kg/m ³
Solubility in H2O N/A
Poisson's Ratio ( form) 0.261
Young's Modulus ( form) 55.7 GPa
Vickers Hardness 863 MPa
Tensile Strength 60 MPa
Thermal Conductivity 0.111 W/cm/K @ 298.2 K
Thermal Expansion (r.t.) (poly) 10.3 µm/(m·K)
Electrical Resistivity N/A
Electronegativity 1.2 Paulings
Specific Heat 0.0437 Cal/g/K @ 25 °C
Heat of Fusion 3.90 Cal/gm mole
Heat of Vaporization 70 K-Cal/gm atom at 3123 °C

Ultra Thin Terbium Nanoscale Foil Health & Safety Information

Signal Word Danger
Hazard Statements H228
Hazard Codes N/A
Risk Codes N/A
Safety Statements N/A
RTECS Number N/A
Transport Information N/A
WGK Germany 3

About Ultra Thin Terbium Nanoscale Foil

American Elements' Nanometal™ nanoscale foil manufacturing unit produces ultra thin foil as thin as only 50 nm thick in diameters up to 910 mm. Typically, foils are in thicknesses from 20 nm to 1000 nm, 1 micron, 2 micron, and up to a few microns thick. Nanometal™ ultra thin foil can also be produced on a substrate with a parting agent to permit removal by floating and can then be mounted on frames. Frames may be washers, rings, or more-complicated assemblies. For foils >1 micron thick see our Terbium Foil page. We also produce Terbium as rods, powder and plates. Other shapes are available by request.

Chemical Identifiers

Linear Formula Tb
Pubchem CID 23958
MDL Number MFCD00011256
EC No. 231-137-6
Beilstein/Reaxys No. N/A
SMILES [Tb]
InchI Identifier InChI=1S/Tb
InchI Key GZCRRIHWUXGPOV-UHFFFAOYSA-N
Chemical Formula
Molecular Weight
Standard InchI
Appearance
Melting Point
Boiling Point
Density

Packaging Specifications

Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Shipping documentation includes a Certificate of Analysis and Safety Data Sheet (SDS). Solutions are packaged in polypropylene, plastic or glass jars up to palletized 440 gallon liquid totes, and 36,000 lb. tanker trucks.

Related Elements

See more Terbium products. Terbium (atomic symbol: Tb, atomic number: 65) is a Block F, Group 3, Period 6 element with an atomic radius of 158.92535.Terbium Bohr Model The number of electrons in each of Terbium's shells is [2, 8, 18, 27, 8, 2] and its electron configuration is [Xe]4f9 6s2. The terbium atom has a radius of 177 pm and a Van der Waals radius of 221 pm.Terbium was discovered and first isolated by Carl Gustaf Mosander in 1842. In its elemental form, terbium is a silvery-white soft metal. Terbium is found in cerite, gadolinite, and monazite. It is not found in nature as a free element. Elemental TerbiumTerbium compounds are brightly fluorescent, and a majority of the world's terbium supply is used for creating green phosphors that enable trichromatic lighting technology. It is also frequently used as a dopant for crystalline solid-state devices and fuel cell materials. It is named after Ytterby, the town in Sweden where it was discovered.