Vanadium Iron Foil

CAS #:

Linear Formula:

V-Fe

MDL Number:

N/A

EC No.:

603-118-6

ORDER

PRODUCT Product Code ORDER SAFETY DATA TECHNICAL DATA
(2N) 99% Vanadium Iron Foil
V-FE-02-F
Pricing > SDS > Data Sheet >
(2N5) 99.5% Vanadium Iron Foil
V-FE-025-F
Pricing > SDS > Data Sheet >
(3N) 99.9% Vanadium Iron Foil
V-FE-03-F
Pricing > SDS > Data Sheet >
(3N5) 99.95% Vanadium Iron Foil
V-FE-035-F
Pricing > SDS > Data Sheet >
(4N) 99.99% Vanadium Iron Foil
V-FE-04-F
Pricing > SDS > Data Sheet >
(5N) 99.999% Vanadium Iron Foil
V-FE-05-F
Pricing > SDS > Data Sheet >

Vanadium Iron Foil Properties (Theoretical)

Compound Formula FeV
Appearance Gray Metallic Foil
Melting Point N/A
Boiling Point N/A
Density N/A
Solubility in H2O N/A
Monoisotopic Mass 106.879 g/mol

Vanadium Iron Foil Health & Safety Information

Signal Word N/A
Hazard Statements N/A
Hazard Codes N/A
RTECS Number N/A
Transport Information N/A
MSDS / SDS

About Vanadium Iron Foil

American Elements manufactures high purity vanadium-iron alloy foils in numerous dimensions. Standard metal and alloy foil thicknesses range from 0.003" to approximately 2mm; materials can also be rolled down as thin as 0.001" for use as an evaporation source in microelectronics, optics, magnetics, MEMS, and hard resistant coatings. Piece sizes are available up to approximately 7" maximum width. Maximum lengths of about 20" can be obtained with a nominal thickness between about 0.005" and 0.020" for thin film deposition on glass or metal substrates. We also manufacture vanadium iron alloy in other forms such as sputtering target. Please request a quote above to receive pricing information based on your specifications for alloy composition and foil dimensions.

Vanadium Iron Foil Synonyms

Ferro Vanadium, Ferrovanadium, 40% Grade, 80% Grade, CAS 76797-74-5, VFe

Chemical Identifiers

Linear Formula V-Fe
MDL Number N/A
EC No. 603-118-6
Pubchem CID 14928220
IUPAC Name iron; vanadium
SMILES [V].[Fe]
InchI Identifier InChI=1S/Fe.V
InchI Key PNXOJQQRXBVKEX-UHFFFAOYSA-N

Packaging Specifications

Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Shipping documentation includes a Certificate of Analysis and Safety Data Sheet (SDS). Solutions are packaged in polypropylene, plastic or glass jars up to palletized 440 gallon liquid totes, and 36,000 lb. tanker trucks.

Related Elements

See more Iron products. Iron (atomic symbol: Fe, atomic number: 26) is a Block D, Group 8, Period 4 element with an atomic weight of 55.845. The number of electrons in each of Iron's shells is 2, 8, 14, 2 and its electron configuration is [Ar] 3d6 4s2. Iron Bohr ModelThe iron atom has a radius of 126 pm and a Van der Waals radius of 194 pm. Iron was discovered by humans before 5000 BC. In its elemental form, iron has a lustrous grayish metallic appearance. Iron is the fourth most common element in the Earth's crust and the most common element by mass forming the earth as a whole. Iron is rarely found as a free element, since it tends to oxidize easily; it is usually found in minerals such as magnetite, hematite, goethite, limonite, or siderite.Elemental Iron Though pure iron is typically soft, the addition of carbon creates the alloy known as steel, which is significantly stronger.

See more Vanadium products. Vanadium (atomic symbol: V, atomic number: 23) is a Block D, Group 5, Period 4 element with an atomic weight of 50.9415. Vanadium Bohr ModelThe number of electrons in each of Vanadium's shells is 2, 8, 11, 2 and its electron configuration is [Ar] 3d3 4s2. The vanadium atom has a radius of 134 pm and a Van der Waals radius of 179 pm. Vanadium was discovered by Andres Manuel del Rio in 1801 and first isolated by Nils Gabriel Sefström in 1830. In its elemental form, vanadium has a bluish-silver appearance. Elemental VanadiumIt is a hard, ductile transition metal that is primarily used as a steel additive and in alloys such as Titanium-6AL-4V, which is composed of titanium, aluminum, and vanadium and is the most common titanium alloy commercially produced. Vanadium is found in fossil fuel deposits and 65 different minerals. Vanadium is not found free in nature; however, once isolated it forms an oxide layer that stabilizes the free metal against further oxidation. Vanadium was named after the word "Vanadis" meaning goddess of beauty in Scandinavian mythology.

TODAY'S TOP DISCOVERY!

March 28, 2024
Los Angeles, CA
Each business day American Elements' scientists & engineers post their choice for the most exciting materials science news of the day
U.S. DOE scientists convert carbon monoxide into methanol using cascade reaction strategy

U.S. DOE scientists convert carbon monoxide into methanol using cascade reaction strategy