Vanadium Molybdenum Foil

Linear Formula:

V-Mo

MDL Number:

N/A

EC No.:

N/A

ORDER

PRODUCT Product Code ORDER SAFETY DATA TECHNICAL DATA
(2N) 99% Vanadium Molybdenum Foil
V-MO-02-F
 Pricing > SDS > Data Sheet >
(2N5) 99.5% Vanadium Molybdenum Foil
V-MO-025-F
 Pricing > SDS > Data Sheet >
(3N) 99.9% Vanadium Molybdenum Foil
V-MO-03-F
 Pricing > SDS > Data Sheet >
(3N5) 99.95% Vanadium Molybdenum Foil
V-MO-035-F
 Pricing > SDS > Data Sheet >
(4N) 99.99% Vanadium Molybdenum Foil
V-MO-04-F
 Pricing > SDS > Data Sheet >
(5N) 99.999% Vanadium Molybdenum Foil
V-MO-05-F
 Pricing > SDS > Data Sheet >
WHOLESALE/SKU 0000-742-262234
Question? Ask an American Elements Engineer

Vanadium Molybdenum Foil Properties (Theoretical)

Compound Formula MoV
Appearance Gray Metallic Foil
Melting Point N/A
Boiling Point N/A
Density N/A
Solubility in H2O N/A
Monoisotopic Mass 148.849 g/mol

Vanadium Molybdenum Foil Health & Safety Information

Signal Word N/A
Hazard Statements N/A
Hazard Codes N/A
RTECS Number N/A
Transport Information N/A
MSDS / SDS Request MSDS / SDS

About Vanadium Molybdenum Foil

American Elements manufactures high purity vanadium-molybdenum alloy foils in numerous dimensions. Standard metal and alloy foil thicknesses range from 0.003" to approximately 2mm; materials can also be rolled down as thin as 0.001" for use as an evaporation source in microelectronics, optics, magnetics, MEMS, and hard resistant coatings. Piece sizes are available up to approximately 7" maximum width. Maximum lengths of about 20" can be obtained with a nominal thickness between about 0.005" and 0.020" for thin film deposition on glass or metal substrates. We also manufacture vanadium molybdenum alloy in other forms such as sputtering target. Please request a quote above to receive pricing information based on your specifications for alloy composition and foil dimensions.

Vanadium Molybdenum Foil Synonyms

70295-30-6, CAs 88966-66-9, MoV3, V3Mo

Chemical Identifiers

Linear Formula V-Mo
MDL Number N/A
EC No. N/A
Pubchem CID 71404980
IUPAC Name molybdenum; vanadium
SMILES [V].[Mo]
InchI Identifier InChI=1S/Mo.V
InchI Key WUJISAYEUPRJOG-UHFFFAOYSA-N

Packaging Specifications

Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Shipping documentation includes a Certificate of Analysis and Safety Data Sheet (SDS). Solutions are packaged in polypropylene, plastic or glass jars up to palletized 440 gallon liquid totes, and 36,000 lb. tanker trucks.

Related Elements

See more Molybdenum products. Molybdenum (atomic symbol: Mo, atomic number: 42) is a Block D, Group 6, Period 5 element with an atomic weight of 95.96. Molybdenum Bohr ModelThe number of electrons in each of molybdenum's shells is [2, 8, 18, 13, 1] and its electron configuration is [Kr] 4d5 5s1. The molybdenum atom has a radius of 139 pm and a Van der Waals radius of 209 pm. In its elemental form, molybdenum has a gray metallic appearance. Molybdenum was discovered by Carl Wilhelm in 1778 and first isolated by Peter Jacob Hjelm in 1781. Molybdenum is the 54th most abundant element in the earth's crust. Elemental MolybdenumIt has the third highest melting point of any element, exceeded only by tungsten and tantalum. Molybdenum does not occur naturally as a free metal, it is found in various oxidation states in minerals. The primary commercial source of molybdenum is molybdenite, although it is also recovered as a byproduct of copper and tungsten mining. The origin of the name Molybdenum comes from the Greek word molubdos meaning lead.

See more Vanadium products. Vanadium (atomic symbol: V, atomic number: 23) is a Block D, Group 5, Period 4 element with an atomic weight of 50.9415. Vanadium Bohr ModelThe number of electrons in each of Vanadium's shells is 2, 8, 11, 2 and its electron configuration is [Ar] 3d3 4s2. The vanadium atom has a radius of 134 pm and a Van der Waals radius of 179 pm. Vanadium was discovered by Andres Manuel del Rio in 1801 and first isolated by Nils Gabriel Sefström in 1830. In its elemental form, vanadium has a bluish-silver appearance. Elemental VanadiumIt is a hard, ductile transition metal that is primarily used as a steel additive and in alloys such as Titanium-6AL-4V, which is composed of titanium, aluminum, and vanadium and is the most common titanium alloy commercially produced. Vanadium is found in fossil fuel deposits and 65 different minerals. Vanadium is not found free in nature; however, once isolated it forms an oxide layer that stabilizes the free metal against further oxidation. Vanadium was named after the word "Vanadis" meaning goddess of beauty in Scandinavian mythology.

TODAY'S TOP DISCOVERY™!

April 19, 2024
Los Angeles, CA
Each business day American Elements' scientists & engineers post their choice for the most exciting materials science news of the day
Researchers develop enzymatic cocktail that can kill tuberculosis-causing mycobacteria

Researchers develop enzymatic cocktail that can kill tuberculosis-causing mycobacteria

Click here to see the primary source for this post and previous posts > > >