Skip to main content

Vanadium Tape

CAS #: 7440-62-2
Linear Formula:
V
MDL Number
MFCD00011453
EC No.:
231-171-1

ORDER

Product Product Code ORDER SAFETY DATA Technical data
(3N) 99.9% Vanadium Tape V-M-03-TAPE SDS > Data Sheet >
(3N5) 99.95% Vanadium Tape V-M-035-TAPE SDS > Data Sheet >
(4N) 99.99% Vanadium Tape V-M-04-TAPE SDS > Data Sheet >
(5N) 99.999% Vanadium Tape V-M-05-TAPE SDS > Data Sheet >
(2N) 99% Vanadium Tape V-M-02-TAPE SDS > Data Sheet >
(2N5) 99.5% Vanadium Tape V-M-025-TAPE SDS > Data Sheet >
WHOLESALE/SKU 0000-742-{{nid}}

Vanadium Tape Properties (Theoretical)

Molecular Weight 163
Appearance Silver-Grey
Melting Point 1890 °C
Boiling Point 3380 °C
Density 6.11 g/cm3
Solubility in H2O N/A
Poisson's Ratio 0.37
Young's Modulus 128 GPa
Vickers Hardness N/A
Tensile Strength N/A
Thermal Conductivity 0.307 W/cm/K @ 298.2 K
Thermal Expansion (25 °C) 8.4 µm·m-1·K-1
Electrical Resistivity 25.4 microhm-cm @ 20 oC °C
Electronegativity 1.6 Paulings
Specific Heat 0.116 Cal/g/K @ 25 °C
Heat of Vaporization 106 K-Cal/gm atom at 3380 °C

Vanadium Tape Health & Safety Information

Signal Word Danger
Hazard Statements H228-H315-H319-
Hazard Codes N/A
Precautionary Statements P210-P261-P280-P305+P351+P338-P405-P501
Flash Point Not applicable
Risk Codes N/A
Safety Statements N/A
RTECS Number YW1355000
Transport Information UN 3089 4.1/PG 2
WGK Germany 3
GHS Pictogram
Image
Exclamation Point - GHS07
,
Image
Flammable - GHS02

About Vanadium Tape

Vanadium TapeVanadium Tape is commonly used as a strong light weight outer coating. Additionally, tapes can serve as adhesives that bond two objects together. American Elements specializes in producing Vanadium High Purity Tape and sheets in many thicknesses and sizes for numerous industrial uses and provides health and occupational safety information for this product. Most tapes are produced from cast ingots for use in coating and thin film Chemical Vapor Deposition (CVD) and Physical Vapor Deposition (PVD) processes including Thermal and Electron Beam (E-Beam) Evaporation, Low Temperature Organic Evaporation, Atomic Layer Deposition (ALD), Organometallic and Chemical Vapor Deposition (MOCVD) for specific applications such as fuel cells and solar energy. Vanadium Tape is usually in the form of long, thin, rolled metal vanadium strips. Thickness can range from 0.003" to approximately 2mm for all metals. Some metals can also be rolled down as thin as 0.001" for use as an evaporation source in microelectronics, optics, magnetics, MEMS, and hard resistant coatings. Piece sizes are available up to approximately 7" maximum width. Maximum lengths of about 20" can be obtained with a nominal thickness between about 0.005" and 0.020" for thin film deposition on glass or metal substrates. Materials are produced using crystallization, solid state and other ultra high purification processes such as sublimation. American Elements specializes in producing custom compositions for commercial and research applications and for new proprietary technologies. American Elements also casts any of the rare earth metals and most other advanced materials into rod, bar, or plate form, as well as other machined shapes and through other processes such as nanoparticles and in the form of solutions and organometallics. Other shapes are available by request. Vanadium Tape is used as a protective coating on a wide variety of materials. Tape is also used in packaging applications.

Synonyms

N/A

Chemical Identifiers

Linear Formula V
Pubchem CID 23990
MDL Number MFCD00011453
EC No. 231-171-1
Beilstein/Reaxys No. N/A
SMILES [V]
InchI Identifier InChI=1S/V
InchI Key LEONUFNNVUYDNQ-UHFFFAOYSA-N
Chemical Formula
Molecular Weight
Standard InchI
Appearance
Melting Point
Boiling Point
Density

Packaging Specifications

Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Shipping documentation includes a Certificate of Analysis and Safety Data Sheet (SDS). Solutions are packaged in polypropylene, plastic or glass jars up to palletized 440 gallon liquid totes, and 36,000 lb. tanker trucks.

Related Elements

See more Vanadium products. Vanadium (atomic symbol: V, atomic number: 23) is a Block D, Group 5, Period 4 element with an atomic weight of 50.9415. Vanadium Bohr ModelThe number of electrons in each of Vanadium's shells is 2, 8, 11, 2 and its electron configuration is [Ar] 3d3 4s2. The vanadium atom has a radius of 134 pm and a Van der Waals radius of 179 pm. Vanadium was discovered by Andres Manuel del Rio in 1801 and first isolated by Nils Gabriel Sefström in 1830. In its elemental form, vanadium has a bluish-silver appearance. Elemental VanadiumIt is a hard, ductile transition metal that is primarily used as a steel additive and in alloys such as Titanium-6AL-4V, which is composed of titanium, aluminum, and vanadium and is the most common titanium alloy commercially produced. Vanadium is found in fossil fuel deposits and 65 different minerals. Vanadium is not found free in nature; however, once isolated it forms an oxide layer that stabilizes the free metal against further oxidation. Vanadium was named after the word "Vanadis" meaning goddess of beauty in Scandinavian mythology.