Skip to main content

Yttrium Samples

CAS #: 7440-65-5
Linear Formula:
Y
MDL Number
MFCD00011468
EC No.:
231-174-8

ORDER

Product Product Code ORDER SAFETY DATA Technical data
(2N) 99% Yttrium Metal Samples Y-M-02-SAMP SDS > Data Sheet >
(3N) 99.9% Yttrium Metal Samples Y-M-03-SAMP SDS > Data Sheet >
(4N) 99.99% Yttrium Metal Samples Y-M-04-SAMP SDS > Data Sheet >
(4N) 99.99% Yttrium Metal Samples Y-M-05-SAMP SDS > Data Sheet >
WHOLESALE/SKU 0000-742-{{nid}}

Yttrium Samples Properties (Theoretical)

Molecular Weight 88.91
Appearance Silvery
Melting Point 1526 °C
Boiling Point 3336 °C
Density 4472 kg/m3
Solubility in H2O N/A
Poisson's Ratio 0.243
Young's Modulus 63.5 GPa
Vickers Hardness N/A
Tensile Strength 67 MPa
Thermal Conductivity 0.172 W/cm/K @ 298.2 K
Thermal Expansion (r.t.) (poly) 10.6 µm/(m·K)
Electrical Resistivity 57.0 microhm-cm @ °C
Electronegativity 1.3 Paulings
Specific Heat 0.068 Cal/g/K @ 25 °C
Heat of Vaporization 93 K-Cal/gm atom at 3338 °C

Yttrium Samples Health & Safety Information

Signal Word N/A
Hazard Statements N/A
Hazard Codes N/A
Precautionary Statements N/A
Flash Point Not applicable
Risk Codes N/A
Safety Statements N/A
RTECS Number N/A
Transport Information NONH
WGK Germany 3

About Yttrium Samples

Yttrium SampleYttrium samples are suitable for metallurgical analysis, chemical analysis, physical testing, mechanical testing, failure analysis, fire & flammability testing, contaminant identification and weatherization studies. Metallurgical testing is used to determine quality by analyzing the microstructure of a sample under a microscope. American Elements specializes in producing irregular shaped Yttrium Samples with the highest possible density and smallest possible average grain sizes for use in Chemical Vapor Deposition (CVD) and Physical Vapor Deposition (PVD) processes including Thermal and Electron Beam (E-Beam) Evaporation, Low Temperature Organic Evaporation, Atomic Layer Deposition (ALD), Metallic-Organic and Chemical Vapor Deposition (MOCVD). Yttrium A wide variety of American Elements products are available in sample form for materials and metallurgical testing procedures. Yttrium samples vary in size and thickness. Samples are available in custom sizes. samples are available in dimensions appropriate for numerous testing procedures. Materials are produced using crystallization, solid state and other ultra high purification processes such as sublimation. Yttrium samples are suitable for metallurgical analysis, chemical analysis, physical testing, mechanical testing, failure analysis, fire & flammability testing, contaminant identification and weatherization studies. Metallurgical testing is used to determine quality by analyzing the microstructure of a sample under a microscope. American Elements specializes in producing custom compositions for commercial and research applications and for new proprietary technologies. American Elements also casts any of the rare earth metals and most other advanced materials into rod, bar or plate form, as well as other machined shapes. American Elements produces to many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia) and follows applicable ASTM testing standards. Typical and custom packaging is available. We also produce Yttrium as rod, ingot, powder, pellets, disc, granules, wire, and in compound forms, such as oxide. Other shapes are available by request. A wide variety of American Elements products are available in sample form for materials and metallurgical testing procedures. Yttrium samples vary in size and thickness.

Chemical Identifiers

Linear Formula Y
Pubchem CID 23993
MDL Number MFCD00011468
EC No. 231-174-8
Beilstein/Reaxys No. N/A
SMILES [Y]
InchI Identifier InChI=1S/Y
InchI Key VWQVUPCCIRVNHF-UHFFFAOYSA-N
Chemical Formula
Molecular Weight
Standard InchI
Appearance
Melting Point
Boiling Point
Density

Packaging Specifications

Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Shipping documentation includes a Certificate of Analysis and Safety Data Sheet (SDS). Solutions are packaged in polypropylene, plastic or glass jars up to palletized 440 gallon liquid totes, and 36,000 lb. tanker trucks.

Related Elements

See more Yttrium products. Yttrium (atomic symbol: Y, atomic number: 39) is a Block D, Group 3, Period 5 element with an atomic weight of 88.90585. Yttrium Bohr ModelThe number of electrons in each of yttrium's shells is [2, 8, 18, 9, 2] and its electron configuration is [Kr] 4d1 5s2. The yttrium atom has a radius of 180 pm and a Van der Waals radius of 219 pm. Yttrium was discovered by Johann Gadolin in 1794 and first isolated by Carl Gustav Mosander in 1840. In its elemental form, Yttrium has a silvery white metallic appearance. Yttrium has the highest thermodynamic affinity for oxygen of any element. Elemental YttriumYttrium is not found in nature as a free element and is almost always found combined with the lanthanides in rare earth minerals. While not part of the rare earth series, it resembles the heavy rare earths which are sometimes referred to as the "yttrics" for this reason. Another unique characteristic derives from its ability to form crystals with useful properties. The name yttrium originated from a Swedish village near Vaxholm called Yttbery where it was discovered.

Recent Research