20th anniversary seal20th anniversary seal20th anniversary seal

Zirconium 1,4-dicarboxybenzene MOF

UiO-66

CAS #:

Linear Formula:

Zr6O4(OH)4(C8H6O4)6

MDL Number:

N/A

EC No.:

N/A

ORDER

PRODUCT Product Code ORDER SAFETY DATA TECHNICAL DATA
Zirconium 1,4-dicarboxybenzene MOF
ZR-OMX-01-MOF
Pricing > SDS > Data Sheet >

Zirconium 1,4-dicarboxybenzene MOF Properties (Theoretical)

Compound Formula C48H24O30Zr6
Molecular Weight 1627.99
Appearance White powder
Melting Point Decomposes at 500 °C
Boiling Point N/A
Density N/A
Specific Surface Area gt; 1100m2/g
Solubility in H2O N/A
Exact Mass N/A
Monoisotopic Mass N/A
Charge N/A

Zirconium 1,4-dicarboxybenzene MOF Health & Safety Information

Signal Word N/A
Hazard Statements N/A
Hazard Codes N/A
Precautionary Statements P262-P280-P305+P351+P338-P304+P340-P312-P403+P233
Risk Codes N/A
Safety Statements N/A
Transport Information NONH for all modes of transport

View and Print SDS

SAFETY DATA SHEET

Date Accessed: 10/18/2019
Date Revised: 05/15/2015

SECTION 1. IDENTIFICATION

Product Name: Zirconium 1,4-dicarboxybenzene MOF

Product Number: All applicable American Elements product codes, e.g. ZR-OMX-01-MOF 01

CAS #: 1072413-80-9

Relevant identified uses of the substance: Scientific research and development

Supplier details:
American Elements
10884 Weyburn Ave.
Los Angeles, CA 90024
Tel: +1 310-208-0551
Fax: +1 310-208-0351

Emergency telephone number:
Domestic, North America: +1 800-424-9300
International: +1 703-527-3887


SECTION 2. HAZARDS IDENTIFICATION

Classification of the substance or mixture
GHS07
Skin Irrit. 2 H315 Causes skin irritation.
Eye Irrit. 2A H319 Causes serious eye irritation.
STOT SE 3 H335 May cause respiratory irritation.
Label elements
GHS label elements
The substance is classified and labeled according to the Globally Harmonized System (GHS).
Hazard pictograms

Exclamation Mark - GHS07

GHS07
Signal word Warning
Hazard-determining components of labeling:
Zirconium 1,4-dicarboxybenzene MOF (UiO-66)
Hazard statements
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H335 May cause respiratory irritation.
Precautionary statements
P262 Do not get in eyes, on skin, or on clothing.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P305+P351+P338 If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P403+P233 Store in a well-ventilated place. Keep container tightly closed.
P501 Dispose of contents/container in accordance with local/regional/national/international regulations.
Classification system:
NFPA ratings (scale 0 - 4)
Health = 1
Fire = 0
Reactivity = 0
HMIS-ratings (scale 0 - 4)
Health = 1
Fire = 0
Reactivity = 0
Other hazards
Results of PBT and vPvB assessment
PBT: N/A
vPvB: N/A


SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS

Substances
CAS # / Substance Name 1072413-80-9
Zirconium 1,4-dicarboxybenzene MOF (UiO-66)


SECTION 4. FIRST AID MEASURES

Description of first aid measures
If inhaled: In case of unconsciousness place patient stably in side position for transportation.
In case of skin contact: Immediately wash with soap and water; rinse thoroughly.
In case of eye contact: Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
If swallowed: If symptoms persist consult doctor.
Information for doctor:
Most important symptoms and effects, both acute and delayed
No data available
Indication of any immediate medical attention and special treatment needed
No data available


SECTION 5. FIREFIGHTING MEASURES

Extinguishing media
Suitable extinguishing agents: CO2, extinguishing powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
Special hazards arising from the substance or mixture
No data available
Advice for firefighters
Protective equipment: No special measures required


SECTION 6. ACCIDENTAL RELEASE MEASURES

Personal precautions, protective equipment and emergency procedures: Not Required
Enviornmental precautions: No Special measures required
Methods and materials for containment and cleanup: Dispose contaminated material as waste according to item 13.
Ensure adequate ventilation.
Refrence to other sections
See Section 7 for information on safe handling.
See Section 8 for information on personal prection equipment.
See Section 13 for disposal information.


SECTION 7. HANDLING AND STORAGE

Handling:
Precautions for safe handling: No special precautions are necessary if used correctly.
Information about protection against explosions and fires: No special measures required.
Conditions for safe storage, including any incimpatabilities
Storage:
Requirements to be met by storeooms and receptables: No special requirements.
Information about storage in one common storage facility: Not required.
Further information about storage conditions: Keep receptacle tightly sealed.
Specific end use(s): No data available


SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION

Additional information about design of technical systems: No further data; see item 7
Control Parameters
Components with limit values that require monitoring at the workplace: Not required.
Additional information: The lists that were valid during the creation where used as basis.
Exposure controls
Personal protective equpment:
General protective and hygienic measures:
Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing.
Wash hands before breaks and at the end of work.
Avoid contact with the eyes and skin.
Breathing equipment:
In case of brief exposure or low pollution use respiratory filter device. In case of intesive or longer exposure use respiratory protective device that is independent of circulating air.
Protection of hands:
Protective gloves
The glove material has to be imperneable and resistant to the product/ the substance/ the preparation. Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation.
Material of Glove
The selection of the sutiable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer.
Penetration time of Glove Material
The exact break through time has to be found out by the manufacturer of the protective goves and has to be observed.
Eye Protection:
Tightly Sealed Goggles


SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES

Information on basic physical and chemical properties
General Information
Appearance:
Form: Powder
Color: White
Odor: Odorless
Odor threshold: No data available.
pH: N/A
Melting point/Melting range: Undetermined.
Boiling point/Boiling range: Undetermined.
Flash point: N/A
Flammability (solid, gas): Product is not flammable.
Ignition temperature:
Decomposition temperature: No data available.
Autoignition: No data available.
Danger of explosion: Product does not present an explosion hazard.
Explosion limits:
Lower: No data available.
Upper: No data available.
Vapor pressure: N/A
Density: No data available.
Relative density: No data available.
Vapor density: N/A
Evaporation rate: N/A
Solubility in Water (H2O): Insoluble.
Partition coefficient (n-octanol/water): No data available.
Viscosity:
Dynamic: N/A
Kinematic: N/A
Solvent content:
Organic solvents: 0.0 %
VOC content: 0.0 g/l / 0.00 lb/gl
Solids content: 100.0 %
Other information: No data available


SECTION 10. STABILITY AND REACTIVITY

Reactivity
No data available
Chemical stability
Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.
Possibility of hazardous reactions: No dangerous reactions known.
Conditions to avoid: No data available
Incompatible materials: No data available
Hazardous decomposition products: No dangerous decomposition products known.


SECTION 11. TOXICOLOGICAL INFORMATION

Information on toxicological effects
Acute toxicity:
Primary irritant effect:
on the skin: Irritant to skin and mucous membranes.
on the eye: Irritating effect.
Sensitization: No sensitizing effects known.
Additional toxicological information:
Carcinogenic categories
IARC (International Agency for Research on Cancer)
Substance is not listed.
NTP (National Toxicology Program)
Substance is not listed.
OSHA-Ca (Occupational Safety & Health Administration)
Substance is not listed.


SECTION 12. ECOLOGICAL INFORMATION

Toxicity
Aquatic toxicity: No data available
Persistence and degradability: No data available
Behavior in environmental systems:
Bioaccumulative potential: No data available
Mobility in soil: No data available
Additional ecological information:
General notes: Not known to be hazardous to water.
Results of PBT and vPvB assessment
PBT: N/A
vPvB: N/A·
Other adverse effects: No data available


SECTION 13. DISPOSAL CONSIDERATIONS

Waste treatment methods
Recommendation: Must not be disposed of together with household garbage. Do not allow product to enter drains, sewage systems, or other water courses system.
Uncleaned packagings:
Recommendation: Disposal must be made according to official regulations.


SECTION 14. TRANSPORT INFORMATION

UN-Number
DOT, ADN, IMDG, IATA
not regulated
UN proper shipping name
DOT, ADN, IMDG, IATA
not regulated
Transport hazard class(es)
DOT, ADN, IMDG, IATA
Class
not regulated
Packing group
DOT, IMDG, IATA
not regulated
Environmental hazards:
Marine pollutant: No
Special precautions for user
N/A
Transport in bulk according to Annex II of
MARPOL73/78 and the IBC Code
N/A
UN "Model Regulation":
not regulated


SECTION 15. REGULATORY INFORMATION

Safety, health and environmental regulations/legislation specific for the substance or mixture
Sara
Section 355 (extremely hazardous substances):
Substance is not listed.
Section 313 (Specific toxic chemical listings):
Substance is not listed.
TSCA (Toxic Substances Control Act):
Substance is not listed.
Proposition 65
Chemicals known to cause cancer:
Substance is not listed.
Chemicals known to cause reproductive toxicity for females:
Substance is not listed.·
Chemicals known to cause reproductive toxicity for males:
Substance is not listed.
Chemicals known to cause developmental toxicity:
Substance is not listed.
Carcinogenic categories
EPA (Environmental Protection Agency)
Substance is not listed.
TLV (Threshold Limit Value established by ACGIH)
Substance is not listed.
NIOSH-Ca (National Institute for Occupational Safety and Health)
Substance is not listed.
GHS label elements
The substance is classified and labeled according to the Globally Harmonized System (GHS).
Hazard pictograms
GHS07
Signal word
Warning
Hazard-determining components of labeling:
Zirconium 1,4-dicarboxybenzene MOF (UiO-66)
Hazard statements
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H335 May cause respiratory irritation.
Precautionary statements
P262 Do not get in eyes, on skin, or on clothing.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P305+P351+P338 If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if presentand easy to do. Continue rinsing.
P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P403+P233 Store in a well-ventilated place. Keep container tightly closed.
P501 Dispose of contents/container in accordance with local/regional/national/international
regulations.
Chemical safety assessment: A Chemical Safety Assessment has not been carried out.


SECTION 16. OTHER INFORMATION

Safety Data Sheet according to Regulation (EC) No. 1907/2006 (REACH). The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any guarantee of the properties of the product. American Elements shall not be held liable for any damage resulting from handling or from contact with the above product. See reverse side of invoice or packing slip for additional terms and conditions of sale. COPYRIGHT 1997-2018 AMERICAN ELEMENTS. LICENSED GRANTED TO MAKE UNLIMITED PAPER COPIES FOR INTERNAL USE ONLY.

About Zirconium 1,4-dicarboxybenzene MOF

Zirconium 1,4icarboxybenzene MOF (UiO-66) is metal-organic framework material with high surface area (1147m2/g), porosity, and thermal stability. American Elements can produce materials to custom specifications by request, in addition to custom compositions for commercial and research applications and and new proprietary technologies. American Elements also casts any of the rare earth metals and most other advanced materials into rod, bar or plate form, as well as numerous other machined shapes, nanomaterials, and in the form of solutions and organometallic compounds. American Elements produces to many standard grades when applicable, including Mil Spec (military grade); ACS, Reagent and Technical Grade; Food, Agricultural and Pharmaceutical Grade; Optical Grade, USP and EP/BP (European Pharmacopoeia/British Pharmacopoeia) and follows applicable ASTM testing standards. Typical and custom packaging is available. Additional technical, research and safety (MSDS) information is available as is a Reference Calculator for converting relevant units of measurement.

Zirconium 1,4-dicarboxybenzene MOF Synonyms

UiO-66; Zr-BDC; UiO-66(Zr); UiO-66-P; (Zr6O4(OH)4(1,4 dicarboxybenzene)) MOF; CAS 1072413-89-8

Chemical Identifiers

Linear Formula Zr6O4(OH)4(C8H6O4)6
MDL Number N/A
EC No. N/A
Beilstein Registry No. N/A
Pubchem CID N/A
IUPAC Name N/A
SMILES N/A
InchI Identifier N/A
InchI Key N/A

Packaging Specifications

Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Shipping documentation includes a Certificate of Analysis and Safety Data Sheet (SDS). Solutions are packaged in polypropylene, plastic or glass jars up to palletized 440 gallon liquid totes, and 36,000 lb. tanker trucks.

Related Elements

See more Zirconium products. Zirconium (atomic symbol: Zr, atomic number: 40) is a Block D, Group 4, Period 5 element with an atomic weight of 91.224. Zirconium Bohr ModelThe number of electrons in each of Zirconium's shells is 2, 8, 18, 10, 2 and its electron configuration is [Kr] 4d2 5s2. The zirconium atom has a radius of 160 pm and a Van der Waals radius of 186 pm. Zirconium was discovered by Martin Heinrich Klaproth in 1789 and first isolated by Jöns Jakob Berzelius in 1824. In its elemental form, zirconium has a silvery white appearance that is similar to titanium. Zirconium's principal mineral is zircon (zirconium silicate). Elemental ZirconiumZirconium is commercially produced as a byproduct of titanium and tin mining and has many applications as a opacifier and a refractory material. It is not found in nature as a free element. The name of zirconium comes from the mineral zircon, the most important source of zirconium, and from the Persian wordzargun, meaning gold-like.

Recent Research

TODAY'S SCIENCE POST!

October 18, 2019
Los Angeles, CA
Each business day American Elements' scientists & engineers post their choice for the most exciting materials science news of the day

Scientists simplify lithium-sulfur battery production to meet future energy storage needs