SECTION 2. HAZARDS IDENTIFICATION

2.1. Classification of the substance or mixture
Classification EC 67/548 or EC 1999/45
Classification : C; R34
R43
Hazard Class and Category Code(s), Regulation (EC) No 1272/2008 (CLP)
Health hazards : Skin corrosion - Category 1B - Danger (CLP : Skin Corr. 1B) H314
Skin sensitisation - Category 1 - Warning (CLP : Skin Sens. 1) H317
2.2. Label elements
Labelling EC 67/548 or EC 1999/45

Symbol(s) êC
Symbol(s) : C : Corrosive
R Phrase(s) : R34 : Causes burns.
R43 : May cause sensitization by skin contact.
S Phrase(s) : S26 : In case of contact with eyes, rinse immediately with plenty of water and seek
medical advice.
S36/37/39 : Wear suitable protective clothing, gloves and eye/face protection.
S45 : In case of accident or if you feel unwell, seek medical advice immediately (
show the label when possible).
Labelling Regulation EC 1272/2008 (CLP)
Hazard pictograms M» MÄ
Signal words : Danger
Hazard statements : H314 : Causes severe skin burns and eye damage.
H317 : May cause an allergic skin reaction.
Precautionary statements
• Prevention : P280: Wear protective gloves, protective clothing, eye protection, face protection.
P260: Do not breathe dust, fume, gas, mist, Vapors, spray.
P264: Wash thoroughly after handling.
P272: Contaminated work clothing should not be allowed out of the workplace.
• Response : P302+P352: IF ON SKIN : Wash with plenty of soap and water.
P301+P330+P331: IF SWALLOWED : Rinse mouth. Do NOT induce vomiting.
P305+P351+P338: IF IN EYES : Rinse cautiously with water for several minutes.
Remove contact lenses, if present and easy to do. Continue rinsing.
P304+P340: IF INHALED : Remove to fresh air and keep at rest in a position
comfortable for breathing.
P303+P361+P353: IF ON SKIN (or hair) : Remove immediately all contaminated
clothing. Rinse skin with water/shower.
P333+P313: If skin irritation or rash occurs : Get medical advice.
P363: Wash contaminated clothing before reuse.
• Storage : P405: Store locked up.
• Disposal considerations : P501: Dispose of this material and its container to hazardous or special waste
collection point, in accordance with local, regional, national and/or international
regulation.
2.3. Other hazards
Other hazards : The substance does not fulfil the criteria to be identified as PBT substance or vPvB
substance according to Annex XIII of Regulation REACH.

SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS

Substance / Preparation : CHLOROAURIC ACID
CAS No :16903-35-8
Substance.
Contains no other components or impurities which will influence the classification of the product.

SECTION 4. FIRST AID MEASURES

4.1. Description of first aid measures
Inhalation : Remove to fresh air and keep at rest in a position comfortable for breathing.
Immediately call a POISON CENTER or doctor.
Skin contact : If skin irritation or rash occurs : Wash contaminated clothing before reuse.
Remove/Take off immediately all contaminated clothing. Wash with plenty of soap
and water. Specific treatment (see on this label). Get medical advice. Immediately
call a POISON CENTER or doctor.
Eye contact : Rinse cautiously with water for several minutes. Remove contact lenses, if present
and easy to do. Continue rinsing. Immediately call a POISON CENTER or doctor.
Ingestion : Immediately call a POISON CENTER or doctor. Rinse mouth. Do NOT induce
vomiting.
4.2. Most important symptoms and effects, both acute and delayed
Symptoms relating to use : Causes severe skin burns and eye damage.
May cause an allergic skin reaction.
4.3. Indication of any immediate medical attention and special treatment needed
General information : Never give anything by mouth to an unconscious person. If you feel unwell, seek
medical advice (show the label where possible).

SECTION 5. FIREFIGHTING MEASURES

5.1. Extinguishing media
Suitable extinguishing media : Foam. Dry powder. Carbon dioxide. Water spray. Sand.
Unsuitable extinguishing media : Do not use a heavy water stream.
Surrounding fires : Use water spray or fog for cooling exposed containers.
5.2. Special hazards arising from the substance or mixture
Hazardous combustion products : Under fire conditions, hazardous fumes will be present.
Thermal decomposition generates : Corrosive Vapors.
5.3. Advice for fire-fighters
Protection against fire : Do not enter fire area without proper protective equipment, including respiratory
protection.
Special procedures : Exercise caution when fighting any chemical fire. Avoid (reject) fire-fighting water to
enter environment.

SECTION 6. ACCIDENTAL RELEASE MEASURES

6.1. Personal precautions, protective equipment and emergency procedures
For emergency responders : Equip cleanup crew with proper protection.
Ventilate area.
For non-emergency personnel : Evacuate unnecessary personnel.
6.2. Environmental precautions
Environmental precautions : Prevent entry to sewers and public waters. Notify authorities if product enters
sewers or public waters.
6.3. Methods and material for containment and cleaning up
Clean up methods : On land, sweep or shovel into suitable containers. Minimize generation of dust.
Store away from other materials.
6.4. Reference to other sections
See section 8. Exposure controls/personal protection

SECTION 7. HANDLING AND STORAGE

7.1. Precautions for safe handling
Handling : Wash thoroughly after handling. Wash contaminated clothing before reuse. Do not
breathe dust, fume, gas, mist, Vapors, spray. Contaminated work clothing should
not be allowed out of the workplace.
Technical protective measures : Provide good ventilation in process area to prevent formation of Vapor.
7.2. Conditions for safe storage, including any incompatibilities : Keep only in the original container in a cool, well ventilated place. Keep container
closed when not in use.
Storage regulation : Comply with applicable regulations.
Storage - away from : Strong bases. Strong acids. Sources of ignition. Direct sunlight.
7.3. Specific end use(s)
Specific end use(s) : None.

SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION

8.1. Exposure controls
Personal protection : Avoid all unnecessary exposure.
• Respiratory protection : Wear approved mask.
• Hand protection : Wear protective gloves.
• Skin protection : Wear suitable protective clothing.
• Eye protection : Chemical goggles or face shield.
• Others : When using, do not eat, drink or smoke.
8.2. Control parameters
Occupational Exposure Limits : No data available.

SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES

9.1. Information on basic physical and chemical properties
Physical state at 20 °C : Solid.
Colour : Yellow crystalline
Odor : N/A
Odor threshold : No data available.
pH value : N/A
Melting point [°C] : No data available.
Decomposition point [°C] : N/A
Critical temperature [°C] : N/A
Auto-ignition temperature [°C] : N/A
Flammability (solid, gas) : N/A
Flash point [°C] : N/A
Boiling point [°C] : N/A
Initial boiling point [°C] : N/A
Final boiling point [°C] : N/A
Evaporation rate : N/A
Vapor pressure [20°C] : N/A
Vapor pressure mm/Hg : N/A
Vapor density : N/A
Density [g/cm3] : 3,9
Relative density, gas (air=1) : N/A
Relative density, liquid (water=1) : N/A
Solubility in water [% weight] : N/A
Solubility in water : N/A
Log Pow octanol / water at 20°C : No data available.
Solubility : N/A
Viscosity at 40°C [mm2/s] : N/A
9.2. Other information
Explosive properties : N/A
Explosion limits - upper [%] : N/A
Explosion limits - lower [%] : N/A
Oxidising properties : No data available

SECTION 10. STABILITY AND REACTIVITY

10.1. Reactivity
Reactivity : Not established.
10.2. Chemical stability
Chemical stability : Stable under recommended storage conditions.
10.3. Possibility of hazardous reactions
Hazardous reactions : Not established.
10.4. Conditions to avoid
Conditions to avoid : Direct sunlight. Extremely high or low temperatures.
10.5. Incompatible materials
Materials to avoid : Strong acids. Strong bases.
10.6. Hazardous decomposition products
Hazardous decomposition products : Fumes. Carbon monoxide. Carbon dioxide.
Thermal decomposition generates : Corrosive Vapors.

SECTION 11. TOXICOLOGICAL INFORMATION

11.1. Information on toxicological effects
Acute toxicity
• Inhalation : Based on available data, the classification criteria are not met.
• Dermal : Based on available data, the classification criteria are not met.
• Ingestion : Based on available data, the classification criteria are not met.
Corrosion : Causes severe skin burns and eye damage.
Irritation : Based on available data, the classification criteria are not met.
Sensitization : May cause an allergic skin reaction.
Mutagenicity : Based on available data, the classification criteria are not met.
Carcinogenicity : Based on available data, the classification criteria are not met.
Toxic for reproduction : Based on available data, the classification criteria are not met.
STOT-single exposure : Based on available data, the classification criteria are not met.
STOT-repeated exposure : Based on available data, the classification criteria are not met.
Aspiration hazard : Based on available data, the classification criteria are not met.

SECTION 12. ECOLOGICAL INFORMATION

12.1. Toxicity
Toxicity information : Not established.
12.2. Persistence - degradability
Persistence - degradability : Biodegradable.
12.3. Bioaccumulative potential
Bioaccumulative potential : Not established.
12.4. Mobility in soil
Mobility in soil : Not established.
12.5. Results of PBT and vPvB assessment
Results of PBT and vPvB assessment : The substance does not fulfil the criteria to be identified as PBT substance or vPvB
substance according to Annex XIII of Regulation REACH.
12.6. Other adverse effects
Environmental precautions : Avoid release to the environment.

SECTION 13. DISPOSAL CONSIDERATIONS

13.1. Waste treatment methods
General : Avoid release to the environment. Dispose in a safe manner in accordance with
local/national regulations.
Dispose of this material and its container to hazardous or special waste collection
point, in accordance with local, regional, national and/or international regulation.

SECTION 14. TRANSPORT INFORMATION

14.1. Land transport (ADR-RID)
Proper shipping name : CORROSIVE SOLID, ACIDIC, INORGANIC, N.O.S.
UN N° : 3260
H.I. nr : 80
ADR - Class : 8
Labelling - Transport : 8 : Corrosive substance.
{
ADR - Classification code : C2
ADR - Group : III
ADR - Packing instructions : P002 R001 LP002
ADR - Limited Quantity : 5 KG
ADR - Tunnel code : E : Passage forbidden through tunnels of category E.
’“»•‘”
14.2. Sea transport (IMDG) [English only]
Proper shipping name : CORROSIVE SOLID, ACIDIC, INORGANIC, N.O.S.
UN N° : 3260
IMO-IMDG - Class or division : 8 : Corrosive substance.
IMO-IMDG - Packing group : III
IMO- IMDG - Packing instructions : P002 LP02
IMO-IMDG - Limited quantities : 5 kg
IMO-IMDG - Marine pollution : No
EMS-Nr : F-A S-B
14.3. Air transport (ICAO-IATA) [English only]
Proper shipping name : CORROSIVE SOLID, ACIDIC, INORGANIC, N.O.S.
UN N° : 3260
IATA - Class or division : 8 : Corrosive substance.
IATA - Packing group : III
IATA - Passenger and Cargo Aircraft : ALLOWED
- Passenger and Cargo - Packing : 860
instruction
- Passenger and Cargo - Maximum : 25 kg
Quantity/Packing
IATA - Cargo only : ALLOWED
- Cargo only - Packing instruction : 864
- Cargo only - Maximum Quantity/ : 100 kg
Packing
IATA - Limited Quantites : 5 kg
ERG-Nr : 8L

SECTION 15. REGULATORY INFORMATION

15.1. Safety, health and environmental regulations/legislation specific for the substance or mixture
Safety, health and environmental : Ensure all national/local regulations are observed.
regulations/legislation specific for the
substance or mixture
REACH Restrictions - Annex XVII : The components of this product are not subject to restrictions.
REACH Authorisation - Annex XIV : The components of this product are not subject to authorization.
15.2. Chemical Safety Assessment
Chemical Safety Assessment : It has not been carried out.