Study of Lithium Silicide Nanoparticles as Anode Materials for Advanced Lithium Ion Batteries.

Title Study of Lithium Silicide Nanoparticles as Anode Materials for Advanced Lithium Ion Batteries.
Authors X. Li; F.E. Kersey-Bronec; J. Ke; J.E. Cloud; Y. Wang; C. Ngo; S. Pylypenko; Y. Yang
Journal ACS Appl Mater Interfaces
DOI 10.1021/acsami.6b16773
Abstract

The development of high-performance silicon anodes for the next generation of lithium ion batteries (LIBs) evokes increasing interest in studying its lithiated counterpart-lithium silicide (LixSi). In this paper we report a systematic study of three thermodynamically stable phases of LixSi (x = 4.4, 3.75, and 2.33) plus nitride-protected Li4.4Si, which are synthesized via the high-energy ball-milling technique. All three LixSi phases show improved performance over that of unmodified Si, where Li4.4Si demonstrates optimum performance with a discharging capacity of 3306 (mA h)/g initially and maintains above 2100 (mA h)/g for over 30 cycles and above 1200 (mA h)/g for over 60 cycles at the current density of 358 mA/g of Si. A fundamental question studied is whether different electrochemical paradigms, that is, delithiation first or lithiation first, influence the electrode performance. No significant difference in electrode performance is observed. When a nitride layer (LixNySiz) is created on the surface of Li4.4Si, the cyclability is improved to retain the capacity above 1200 (mA h)/g for more than 80 cycles. By increasing the nitridation extent, the capacity retention is improved significantly from the average decrease of 1.06% per cycle to 0.15% per cycle, while the initial discharge capacity decreases due to the inactivity of Si in the LixNySiz layer. Moreover, the Coulombic efficiencies of all LixSi-based electrodes in the first cycle are significantly higher than that of a Si electrode (?90% vs 40-70%).

Citation X. Li; F.E. Kersey-Bronec; J. Ke; J.E. Cloud; Y. Wang; C. Ngo; S. Pylypenko; Y. Yang.Study of Lithium Silicide Nanoparticles as Anode Materials for Advanced Lithium Ion Batteries.. ACS Appl Mater Interfaces. 2017;9(19):1607116080. doi:10.1021/acsami.6b16773

Related Elements

Lithium

Lithium Bohr ModelSee more Lithium products. Lithium (atomic symbol: Li, atomic number: 3) is a Block S, Group 1, Period 2 element with an atomic weight of 6.94. The number of electrons in each of Lithium's shells is [2, 1] and its electron configuration is [He] 2s1. The lithium atom has a radius of 152 pm and a Van der Waals radius of 181 pm. Lithium was discovered by Johann Arvedson in 1817 and first isolated by William Thomas Brande in 1821. The origin of the name Lithium comes from the Greek wordlithose which means "stone." Lithium is a member of the alkali group of metals. It has the highest specific heat and electrochemical potential of any element on the period table and the lowest density of any elements that are solid at room temperature. Elemental LithiumCompared to other metals, it has one of the lowest boiling points. In its elemental form, lithium is soft enough to cut with a knife its silvery white appearance quickly darkens when exposed to air. Because of its high reactivity, elemental lithium does not occur in nature. Lithium is the key component of lithium-ion battery technology, which is becoming increasingly more prevalent in electronics.

Silicon

See more Silicon products. Silicon (atomic symbol: Si, atomic number: 14) is a Block P, Group 14, Period 3 element with an atomic weight of 28.085. Silicon Bohr MoleculeThe number of electrons in each of Silicon's shells is 2, 8, 4 and its electron configuration is [Ne] 3s2 3p2. The silicon atom has a radius of 111 pm and a Van der Waals radius of 210 pm. Silicon was discovered and first isolated by Jöns Jacob Berzelius in 1823. Silicon makes up 25.7% of the earth's crust, by weight, and is the second most abundant element, exceeded only by oxygen. The metalloid is rarely found in pure crystal form and is usually produced from the iron-silicon alloy ferrosilicon. Elemental SiliconSilica (or silicon dioxide), as sand, is a principal ingredient of glass, one of the most inexpensive of materials with excellent mechanical, optical, thermal, and electrical properties. Ultra high purity silicon can be doped with boron, gallium, phosphorus, or arsenic to produce silicon for use in transistors, solar cells, rectifiers, and other solid-state devices which are used extensively in the electronics industry.The name Silicon originates from the Latin word silex which means flint or hard stone.

Related Forms & Applications