Alloying and Hardness of Eutectics with Nb and Nb?Si? in Nb-silicide Based Alloys.

In Nb-silicide based alloys, eutectics can form that contain the Nb and Nb?Si? phases. The Nb?Si? can be rich or poor in Ti, the Nb can be substituted with other transition and refractory metals, and the Si can be substituted with simple metal and metalloid elements. For the production of directionally solidified in situ composites of multi-element Nb-silicide based alloys, data about eutectics with Nb and Nb?Si? is essential. In this paper, the alloying behaviour of eutectics observed in Nb-silicide based alloys was studied using the parameters ?H, ?S, VEC (valence electron concentration), ? (related to atomic size), ?? (related to electronegativity), and ? (= T ?S/|?H|). The values of these parameters were in the ranges -41.9 < ?H <-25.5 kJ/mol, 4.7 < ?S < 15 J/molK, 4.33 < VEC < 4.89, 6.23 < ? < 9.44, 0.38 < ? < 1.35, and 0.118 < ?? < 0.248, with a gap in ?? values between 0.164 and 0.181. Correlations between ?S, ?, ?S, and VEC were found for all of the eutectics. The correlation between ?H and ? for the eutectics was the same as that of the Nb, with more negative ?H for the former. The ? versus ?? map separated the Ti-rich eutectics from the Ti-poor eutectics, with a gap in ?? values between 0.164 and 0.181, which is within the ?? gap of the Nb. Eutectics were separated according to alloying additions in the ?? versus VEC, ?? versus , ? versus , and VEC versus maps, where = Al + Ge + Si + Sn. Convergence of data in maps occurred at ? ? 9.25, VEC ? 4.35, ?? in the range ? 0.155 to 0.162, and in the range ? 21.6 at.% to ? 24.3 at.%. The convergence of data also indicated that the minimum concentration of Ti and maximum concentrations of Al and Si in the eutectic were about 8.7 at.% Ti, 6.3 at.% Al, and 21.6 at.% Si, respectively, and that the minimum concentration of Si in the eutectic was in the range 8 < Si < 10 at.%.