Skip to main content

Holmium Samples

CAS #: 7440-60-0
Linear Formula:
Ho
MDL Number
MFCD00011049
EC No.:
231-169-0

ORDER

Product Product Code ORDER SAFETY DATA Technical data
(2N) 99% Holmium Samples HO-M-02-SAMP SDS > Data Sheet >
(3N) 99.9% Holmium Samples HO-M-03-SAMP SDS > Data Sheet >
(4N) 99.99% Holmium Samples HO-M-04-SAMP SDS > Data Sheet >
(5N) 99.999% Holmium Samples HO-M-05-SAMP SDS > Data Sheet >
WHOLESALE/SKU 0000-742-{{nid}}

Holmium Samples Properties (Theoretical)

Molecular Weight 164.93
Appearance Silvery
Melting Point 1474 °C
Boiling Point 2695 °C
Density 8.795 gm/cc
Solubility in H2O N/A
Poisson's Ratio 0.231
Young's Modulus 64.8 GPa
Vickers Hardness 481 MPa
Tensile Strength N/A
Thermal Conductivity 0.162 W/cm/ K @ 298.2 K
Thermal Expansion (r.t.) (poly) 11.2 µm/(m·K)
Electrical Resistivity 87.0 microhm-cm @ 25 °C
Electronegativity 1.2 Paulings
Specific Heat 0.0393 Cal/g/ K @ 25 °C
Heat of Fusion 4.10 Cal/gm mole
Heat of Vaporization 67 K-Cal/gm atom at 2695 °C

Holmium Samples Health & Safety Information

Signal Word N/A
Hazard Statements N/A
Hazard Codes N/A
Precautionary Statements N/A
Risk Codes N/A
Safety Statements N/A
Transport Information NONH for all modes of transport
WGK Germany 3

About Holmium Samples

Holmium SampleHolmium samples are suitable for metallurgical analysis, chemical analysis, physical testing, mechanical testing, failure analysis, fire & flammability testing, contaminant identification and weatherization studies. Metallurgical testing is used to determine quality by analyzing the microstructure of a sample under a microscope. American Elements specializes in producing irregular shaped Holmium Samples with the highest possible density and smallest possible average grain sizes for use in Chemical Vapor Deposition (CVD) and Physical Vapor Deposition (PVD) processes including Thermal and Electron Beam (E-Beam) Evaporation, Low Temperature Organic Evaporation, Atomic Layer Deposition (ALD), Metallic-Organic and Chemical Vapor Deposition (MOCVD). Holmium samples are available in dimensions appropriate for numerous testing procedures. Materials are produced using crystallization, solid state and other ultra high purification processes such as sublimation. Holmium samples are suitable for metallurgical analysis, chemical analysis, physical testing, mechanical testing, failure analysis, fire & flammability testing, contaminant identification and weatherization studies. Metallurgical testing is used to determine quality by analyzing the microstructure of a sample under a microscope. American Elements specializes in producing custom compositions for commercial and research applications and for new proprietary technologies. American Elements also casts any of the rare earth metals and most other advanced materials into rod, bar, or plate form, as well as other machined shapes. We also produce Holmium as rod, ingot, powder, pellets, disc, granules, wire, and in compound forms, such as oxide. Other shapes are available by request. A wide variety of American Elements products are available in sample form for materials and metallurgical testing procedures. Holmium samples vary in size and thickness.

Synonyms

N/A

Chemical Identifiers

Linear Formula Ho
Pubchem CID 23988
MDL Number MFCD00011049
EC No. 231-169-0
Beilstein/Reaxys No. N/A
SMILES [Ho]
InchI Identifier InChI=1S/Ho
InchI Key KJZYNXUDTRRSPN-UHFFFAOYSA-N
Chemical Formula
Molecular Weight
Standard InchI
Appearance
Melting Point
Boiling Point
Density

Packaging Specifications

Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Shipping documentation includes a Certificate of Analysis and Safety Data Sheet (SDS). Solutions are packaged in polypropylene, plastic or glass jars up to palletized 440 gallon liquid totes, and 36,000 lb. tanker trucks.

Related Elements

See more Holmium products. Holmium (atomic symbol: Ho, atomic number: 67) is a Block F, Group 3, Period 6 element with an atomic radius of 164.93032. Holmium Bohr ModelThe number of electrons in each of Holmium's shells is [2, 8, 18, 29, 8, 2] and its electron configuration is [Xe] 4f11 6s2. Elemental Holmium PictureThe holmium atom has a radius of 176 pm and its Covalent radius is 192±7 pm. Holmium was first discovered by Marc Delafontaine in 1878. In its elemental form, holmium has a silvery white appearance. It is relatively soft and malleable. It is stable in dry air at room temperature but rapidly oxidizes at elevated temperatures and in moist air. Holmium has unusual magnetic properties. Its name is derived from the Latin word Holmia meaning Stockholm.