American Elements specializes in producing high purity uniform shaped Ytterbium Balls. American Elements also casts any of the rare earth metals and most other advanced materials into rod, bar or plate form, as well as other machined shapes and through other processes nanoparticles. We also produce Ytterbium as rod, ingot, powder, pieces, disc, granules, wire, and in compound forms, such as oxide. Other shapes are available by request.
Ytterbium has 2 valency state, +2 +3. The number of electrons in each of Ytterbium's shells is 2, 8, 18, 32, 8, 2 and its electronic configuration is [Xe]4f14 6s2. In its metallic form Ytterbium's CAS number is 7440-64-4 and its standard state at 20 ºC is a solid. The Ytterbium atom has a radius of 194 pm and it's Van der Waals radius is unknown. Ytterbium is considered to be fairly toxic. On the periodic table, Ytterbium is a Block F, Group 3, Period 6 element. Ytterbium isbeing applied to numerous fiber amplifier and fiber optic technologies and in various lasing applications. Ytterbium is found in monazite sand as well as the ores euxenite and xenotime and is available as metal and compounds with purities from 99% to 99.999% (ACS grade to ultra-high purity); metals in the form of foil, sputtering target, and rod, and compounds as submicron and nanopowder. It has a single dominant absorption band at 985 in the infra-red making it useful in silicon photocells to directly convert radiant energy to electricity. Ytterbium metal increases its electrical resistance when subjected to very high stresses. This property is used in stress gauges for monitoring ground deformations from earthquakes and nuclear explosions.The name Ytterbium originates after the name for the Swedish village of Ytterby. See Ytterbium research below.
PACKAGING SPECIFICATIONS FOR BULK & RESEARCH QUANTITIES
Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Shipping documentation includes a Certificate of Analysis and Material Safety Data Sheet (MSDS). Bullion and bar forms are best if purchasing solely for physical possession and risk exposure.
Bis(?(2)-2-phen-oxy-propionato-?O:O')bis-[(1,10-phenanthroline-?N,N')bis-(2-phen-oxy-propionato-?O,O')ytterbium(III)].
Shen JB, Liu JL, Zhao GL.
Acta Crystallogr E Struct Rep Online. 2011 Oct 1;67(Pt 10):m1361. Epub 2011 Sep 14.
PMID:
22058692
[PubMed]
"Covalency in the 4f Shell of tris-cyclopentadienyl Ytterbium (YbCp3) - a Spectroscopic Evaluation."
Denning RG, Harmer JR, Green JC, Irwin M.
J Am Chem Soc. 2011 Nov 4. [Epub ahead of print]
PMID:
22053917
[PubMed - as supplied by publisher]
Fingermark detection on non-porous and semi-porous surfaces using YVO(4):Er,Yb luminescent upconverting particles.
Ma R, Shimmon R, McDonagh A, Maynard P, Lennard C, Roux C.
Forensic Sci Int. 2011 Oct 31. [Epub ahead of print]
PMID:
22047749
[PubMed - as supplied by publisher]
Synthesis, Structure, and Reactivity of a Supramolecular Ytterbium(III)-Aqua Complex Featuring Infinite Stacks of C?C Bonds for Photocycloaddition Reactions.
Komori-Orisaku K, Yamashita S, Isozaki T, Sugiura K, Koide Y.
Chemistry. 2011 Oct 21. doi: 10.1002/chem.201102292. [Epub ahead of print] No abstract available.
PMID:
22021148
[PubMed - as supplied by publisher]
Label-free in vivo fiber-based optical-resolution photoacoustic microscopy.
Hajireza P, Shi W, Zemp RJ.
Opt Lett. 2011 Oct 15;36(20):4107-9. doi: 10.1364/OL.36.004107.
PMID:
22002401
[PubMed - in process]
Energy transfer and enhanced 1.54 ?m emission in Erbium-Ytterbium disilicate thin films.
Miritello M, Cardile P, Lo Savio R, Priolo F.
Opt Express. 2011 Oct 10;19(21):20761-72. doi: 10.1364/OE.19.020761.
PMID:
21997086
[PubMed - in process]
Photo darkening of rare earth doped silica.
Mattsson KE.
Opt Express. 2011 Oct 10;19(21):19797-812. doi: 10.1364/OE.19.019797.
PMID:
21996988
[PubMed - in process]
Beam quality and noise properties of coherently combined ytterbium doped single frequency fiber amplifiers.
Tünnermann H, Pöld JH, Neumann J, Kracht D, Willke B, Wessels P.
Opt Express. 2011 Sep 26;19(20):19600-6. doi: 10.1364/OE.19.019600.
PMID:
21996901
[PubMed - in process]
p-Wave Cold Collisions in an Optical Lattice Clock.
Lemke ND, von Stecher J, Sherman JA, Rey AM, Oates CW, Ludlow AD.
Phys Rev Lett. 2011 Sep 2;107(10):103902. Epub 2011 Aug 30.
PMID:
21981504
[PubMed - in process]
Mode-locked 0.5 ?J fiber laser at 976 nm.
Lhermite J, Lecaplain C, Machinet G, Royon R, Hideur A, Cormier E.
Opt Lett. 2011 Oct 1;36(19):3819-21. doi: 10.1364/OL.36.003819.
PMID:
21964108
[PubMed - in process]
Acid-responsive microcapsules: the loading-unloading processes.
Samanta D, Sankar RM, Jaisankar SN, Alam MS, Mandal AB.
Chem Commun (Camb). 2011 Oct 25;47(43):11975-7. Epub 2011 Sep 30.
PMID:
21963934
[PubMed - in process]
Electrochemical spectroscopic investigations on the interaction of an ytterbium complex with DNA and their analytical applications such as biosensor.
Ilkhani H, Ganjali MR, Arvand M, Hejazi MS, Azimi F, Norouzi P.
Int J Biol Macromol. 2011 Dec 1;49(5):1117-23. Epub 2011 Sep 16.
PMID:
21939686
[PubMed - in process]
A family of 13 tetranuclear zinc(ii)-lanthanide(iii) complexes of a [3 + 3] Schiff-base macrocycle derived from 1,4-diformyl-2,3-dihydroxybenzene.
Feltham HL, Klöwer F, Cameron SA, Larsen DS, Lan Y, Tropiano M, Faulkner S, Powell AK, Brooker S.
Dalton Trans. 2011 Oct 25;40(43):11425-32. Epub 2011 Sep 21.
PMID:
21935549
[PubMed - in process]
Generation of 578-nm yellow light over 10 mW by second harmonic generation of an 1156-nm external-cavity diode laser.
Lee WK, Park CY, Yu DH, Park SE, Lee SB, Kwon TY.
Opt Express. 2011 Aug 29;19(18):17453-61. doi: 10.1364/OE.19.017453.
PMID:
21935111
[PubMed - in process]
In vivo near-realtime volumetric optical-resolution photoacoustic microscopy using a high-repetition-rate nanosecond fiber-laser.
Shi W, Hajireza P, Shao P, Forbrich A, Zemp RJ.
Opt Express. 2011 Aug 29;19(18):17143-50. doi: 10.1364/OE.19.017143.
PMID:
21935076
[PubMed - in process]
Self-referenceable frequency comb from a gigahertz diode-pumped solid-state laser.
Pekarek S, Südmeyer T, Lecomte S, Kundermann S, Dudley JM, Keller U.
Opt Express. 2011 Aug 15;19(17):16491-7. doi: 10.1364/OE.19.016491.
PMID:
21935013
[PubMed - in process]
Thermal effects in kilowatt all-fiber MOPA.
Fan Y, He B, Zhou J, Zheng J, Liu H, Wei Y, Dong J, Lou Q.
Opt Express. 2011 Aug 1;19(16):15162-72. doi: 10.1364/OE.19.015162.
PMID:
21934878
[PubMed - in process]
Background-free broadband CARS spectroscopy from a 1-MHz ytterbium laser.
Kumar V, Osellame R, Ramponi R, Cerullo G, Marangoni M.
Opt Express. 2011 Aug 1;19(16):15143-8. doi: 10.1364/OE.19.015143.
PMID:
21934875
[PubMed - in process]
Fabrication and characterization of new Yb-doped zirconia-germano-alumino silicate phase-separated nano-particles based fibers.
Kir'yanov AV, Paul MC, Barmenkov YO, Das S, Pal M, Bhadra SK, Zarate LE, Guzman-Chavez AD.
Opt Express. 2011 Aug 1;19(16):14823-37. doi: 10.1364/OE.19.014823.
PMID:
21934843
[PubMed - in process]
White emission of lithium ytterbium tetraphosphate nanocrystals.
Strek W, Marciniak L, Bednarkiewicz A, Lukowiak A, Wiglusz R, Hreniak D.
Opt Express. 2011 Jul 18;19(15):14083-92. doi: 10.1364/OE.19.014083.
PMID:
21934770
[PubMed - in process]
Material Safety Data Sheet
1 Identification of substance
Product details
Trade name Ytterbium metal
2 Composition/Data on components:
Chemical characterization: Designation: (CAS#)
Ytterbium (CAS# 7440-64-4); 100%
Identification number(s):
EINECS Number: 231-173-2
3 Hazards identification
Hazard designation: · void
Information pertaining to particular dangers for man and environment
Fine powder:
R 11 Highly flammable
4 First aid measures
General information No special measures required.
After inhalation Seek medical treatment in case of complaints.
After skin contact The product is not skin irritating.
After eye contact
Rinse opened eye for several minutes under running water. If symptoms persist, consult doctor.
After swallowing Seek medical treatment.
5 Fire fighting measures
Suitable extinguishing agents Extinguishing powder. Do not use water.
For safety reasons unsuitable extinguishing agents Water.
Protective equipment: No special measures required.
6 Accidental release measures
Person-related safety precautions: Not required.
Measures for environmental protection:
Do not allow material to be released to the environment without proper governmental permits.
Measures for cleaning/collecting: Collect mechanically.
Additional information:
See Section 7 for information on safe handling
See section 8 for information on personal protection equipment.
See Section 13 for information on disposal.
7 Handling and storage
Handling
Information for safe handling:
Keep containers tightly sealed.
Store in cool, dry place in tightly closed containers.
No special precautions necessary if used correctly.
Information about protection against explosions and fires:
No special measures required.
Storage
Requirements to be met by storerooms and containers:
No special requirements.
Information about storage in one common storage facility: Not required.
Further information about storage conditions:
Protect from humidity and keep away from water.
Store under dry inert gas.
8 Exposure controls and personal protection
Additional information about design of technical systems:
No further data; see item 7.
Components with critical values that require monitoring at the workplace:
Not required.
Additional information: No data
Personal protective equipment
General protective and hygienic measures
The usual precautionary measures should be adhered to in handling the chemicals.
Breathing equipment: Not required.
Protection of hands: Not required.
Eye protection: Safety glasses
Body protection: Protective work clothing.
9 Physical and chemical properties:
General Information
Form: Solid.
Colour: Silver grey
Smell: Odourless
Value/Range Unit Method
Change in condition
Melting point/Melting range: 824 ° C
Boiling point/Boiling range: 1427 ° C
Sublimation temperature / start: Not determined
Flash point: Not applicable
Inflammability (solid, gaseous) Product is not inflammable.
Powder: highly flammable
Ignition temperature: Not determined
Decomposition temperature: Not determined
Danger of explosion: Product is not explosive.
Critical values for explosion:
Lower: Not determined
Upper: Not determined
Steam pressure: Not determined
Density at 20 ° C 6.98 g/cm³
Solubility in / Miscibility with
Water: Hydrolyzes slowly
Not determined
10 Stability and reactivity
Thermal decomposition / conditions to be avoided:
No decomposition if used and stored according to specifications.
Materials to be avoided:
Water/moisture
Oxidizing agents
Acids
Halogens
Dangerous reactions:
Turnings, chips: contact with water liberates extremely flammable gases.
Dangerous products of decomposition: Metal oxide
11 Toxicological information
Acute toxicity:
Primary irritant effect:
on the skin: May cause irritation
on the eye: May cause irritation
Sensitization: No sensitizing effect known.
Additional toxicological information:
To the best of our knowledge the acute and chronic toxicity of this substance is not fully known.
The Registry of Toxic Effects of Chemical Substances (RTECS) contains tumorigenic and/or carcinogenic and/or neoplastic data for this product.
12 Ecological information:
General notes:
Do not allow material to be released to the environment without proper governmental permits.
Water hazard class 1 (Self-assessment): slightly hazardous for water.
Do not allow undiluted product or large quantities of it to reach ground water, water bodies or sewage system.
13 Disposal considerations
Product:
Recommendation
Consult state, local or national regulations for proper disposal.
Hand over to disposers of hazardous waste.
Must be specially treated under adherence to official regulations.
Uncleaned packagings:
Recommendation:
Disposal must be made according to official regulations.
14 Transport information
Land transport ADR/RID and GGVS/GGVE (cross-border/domestic)
ADR/RID-GGVS/E Class: None
Maritime transport IMDG/GGVSea:
IMDG/GGVSea Class: None
Air transport ICAO-TI and IATA-DGR:
ICAO/IATA Class: None
Transport/Additional information:
Not dangerous according to the above specifications.
15 Regulatory information
Designation according to EC guidelines:
Observe the normal safety regulations when handling chemicals
The product is not subject to identification regulations under EC Directives and the Ordinance on Hazardous Materials (GefStoffV).
National regulations
Information about limitation of use:
For use only by technically qualified individuals.
Water hazard class:
Water hazard class 1 (Self-assessment): slightly hazardous for water.
16 Other information:
Employers should use this information only as a supplement to other information gathered by them, and should make independent judgement of suitability of this information to ensure proper use and protect the health and safety of employees. This information is furnished without warranty, and any use of the product not in conformance with this Material Safety Data Sheet, or in combination with any other product or process, is the responsibility of the user.
Proud sponsors of Aeromat 2012. Please join us and our customers & co-sponsors Boeing and ATI on
June 18-20, 2012
in Charlotte, North Carolina
Ytterbium has 2 valency state, +2 +3. The number of electrons in each of Ytterbium's shells is 2, 8, 18, 32, 8, 2 and its electronic configuration is [Xe]4f14 6s2. In its metallic form Ytterbium's CAS number is 7440-64-4 and its standard state at 20 ºC is a solid. The Ytterbium atom has a radius of 194 pm and it's Van der Waals radius is unknown. Ytterbium is considered to be fairly toxic. On the periodic table, Ytterbium is a Block F, Group 3, Period 6 
element. Ytterbium is
being applied to numerous fiber amplifier and fiber optic technologies and in various lasing applications. Ytterbium is found in monazite sand as well as the ores euxenite and xenotime and is available as metal and compounds with purities from 99% to 99.999% (ACS grade to ultra-high purity); metals in the form of foil, sputtering target, and rod, and compounds as submicron and nanopowder. It has a single dominant absorption band at 985 in the infra-red making it useful in silicon photocells to directly convert radiant energy to electricity. Ytterbium metal increases its electrical resistance when subjected to very high stresses. This property is used in stress gauges for monitoring ground deformations from earthquakes and nuclear explosions.The name Ytterbium originates after the name for the Swedish village of Ytterby. See Ytterbium research below.
