Skip to main content

Aluminum Nanoprisms

CAS #: 7429-90-5
Linear Formula:
Al
MDL Number
MFCD00134029
EC No.:
231-072-3

ORDER

Product Product Code ORDER SAFETY DATA Technical data
(2N) 99% Aluminum Nanoprisms AL-M-02-NPR SDS > Data Sheet >
(2N5) 99.5% Aluminum Nanoprisms AL-M-025-NPR SDS > Data Sheet >
(3N) 99.9% Aluminum Nanoprisms AL-M-03-NPR SDS > Data Sheet >
(3N5) 99.95% Aluminum Nanoprisms AL-M-035-NPR SDS > Data Sheet >
(4N) 99.99% Aluminum Nanoprisms AL-M-04-NPR SDS > Data Sheet >
(5N) 99.999% Aluminum Nanoprisms AL-M-05-NPR SDS > Data Sheet >
WHOLESALE/SKU 0000-742-{{nid}}

Aluminum Nanoprisms Properties (Theoretical)

Molecular Weight 26.98
Appearance Grey
Melting Point 660.37 °C
Boiling Point 2467 °C
Density N/A
Solubility in H2O N/A
Poisson's Ratio 0.35
Young's Modulus 70 GPa
Vickers Hardness 167 MPa
Thermal Expansion (25 °C) 23.1 µm·m-1·K-1
Crystal Phase / Structure N/A
True Density 2700 g/cm3
Bulk Density 0.08-0.20 g/m3
Average Particle Size ~ 18 nm (0-50nm)
Size Range 2-50 nm
Specific Surface Area 40-60 m2/g
Morphology Spherical

Aluminum Nanoprisms Health & Safety Information

Signal Word Danger
Hazard Statements H228
Hazard Codes F
Precautionary Statements P210-P240-P241-P280-P370 + P378
Flash Point Not applicable
Risk Codes N/A
Safety Statements N/A
RTECS Number BD0330000
Transport Information UN1309 - class 4.1 - PG 2 - Aluminum powder, coated
WGK Germany nwg
GHS Pictogram
Image
Flammable - GHS02

About Aluminum Nanoprisms

American Elements specializes in producing Aluminum as flat irregularly shaped pieces of material in a varying range of sizes. Most flakes/prisms are produced from cast ingots for use in coating and thin film Chemical Vapor Deposition (CVD) and Physical Vapor Deposition (PVD) processes including Thermal and Electron Beam (E-Beam) Evaporation, Low Temperature Organic Evaporation, Atomic Layer Deposition (ALD), Organometallic and Chemical Vapor Deposition (MOCVD) for specific applications such as fuel cells and solar energy. Thickness can range from 0.003" to approximately 2mm for all metals. Some metals can also be rolled down as thin as 0.001" for use as an evaporation source in microelectronics, optics, magnetics, MEMS, and hard resistant coatings. Piece sizes are available up to approximately 7" maximum width. Maximum lengths of about 20" can be obtained with a nominal thickness between about 0.005" and 0.020" for thin film deposition on glass or metal substrates. Materials are produced using crystallization, solid state and other ultra high purification processes such as sublimation. American Elements specializes in producing custom compositions for commercial and research applications and for new proprietary technologies. American Elements also casts any of the rare earth metals and most other advanced materials into rod, bar, or plate form, as well as other machined shapes and through other processes such as nanoparticles and in the form of solutions and organometallics. We also produce Aluminum as rods, powder and plates. Other shapes are available by request.

Synonyms

Aluminium, aluminio, alluminio, aluminyum, ,铝, アルミニウム, 알류미늄, алюминий

Chemical Identifiers

Linear Formula Al
Pubchem CID 5359268
MDL Number MFCD00134029
EC No. 231-072-3
IUPAC Name aluminum
Beilstein/Reaxys No. N/A
SMILES [Al]
InchI Identifier InChI=1S/Al
InchI Key XAGFODPZIPBFFR-UHFFFAOYSA-N
Chemical Formula
Molecular Weight
Standard InchI
Appearance
Melting Point
Boiling Point
Density

Packaging Specifications

Typical bulk packaging includes palletized plastic 5 gallon/25 kg. pails, fiber and steel drums to 1 ton super sacks in full container (FCL) or truck load (T/L) quantities. Research and sample quantities and hygroscopic, oxidizing or other air sensitive materials may be packaged under argon or vacuum. Shipping documentation includes a Certificate of Analysis and Safety Data Sheet (SDS). Solutions are packaged in polypropylene, plastic or glass jars up to palletized 440 gallon liquid totes, and 36,000 lb. tanker trucks.

Related Elements

See more Aluminum products. Aluminum (or Aluminium) (atomic symbol: Al, atomic number: 13) is a Block P, Group 13, Period 3 element with an atomic weight of 26.9815386. It is the third most abundant element in the earth's crust and the most abundant metallic element. Aluminum Bohr Model Aluminum's name is derived from alumina, the mineral from which Sir Humphrey Davy attempted to refine it from in 1812. Aluminum was first predicted by Antoine Lavoisier 1787 and first isolated by Hans Christian Øersted in 1825. Aluminum is a silvery gray metal that possesses many desirable characteristics. It is light, nonmagnetic and non-sparking. It stands second among metals in the scale of malleability, and sixth in ductility. It is extensively used in many industrial applications where a strong, light, easily constructed material is needed. Elemental AluminumAlthough it has only 60% of the electrical conductivity of copper, it is used in electrical transmission lines because of its light weight. Pure aluminum is soft and lacks strength, but alloyed with small amounts of copper, magnesium, silicon, manganese, or other elements, it imparts a variety of useful properties.